esphome-xiaomi_bslamp2/packages/core.yaml

# --------------------------------------------------------------------------
# Substitutions as used by the configuration packages
# These can be overriden from the main device configuration file.
# --------------------------------------------------------------------------

substitutions:
  name: bedside-lamp
  friendly_name: Bedside Lamp
  light_name: ${friendly_name} RGBWW Light
  light_mode_text_sensor_name: ${friendly_name} Light Mode
  default_transition_length: 800ms

# --------------------------------------------------------------------------
# Core setup
# --------------------------------------------------------------------------

esphome:
  name: ${name}

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_FREERTOS_UNICORE: y
    advanced:
      ignore_efuse_mac_crc: true

# Retrieve the code for the xiaomi_bslamp2 platform from GitHub.
external_components:
  - source:
      type: git
      url: https://github.com/mmakaay/esphome-xiaomi_bslamp2
      ref: dev
    refresh: 60s

# Disable the reboot timeout. By default, the lamp reboots after 15
# minutes without any client connections (e.g. when home assistant is off
# line, or when the WiFi is broken). Reboots are annoying though, because
# the RGBWW LEDs will turn off during the reboot, causing the light to
# flicker.
api:
  reboot_timeout: 0s

# The log level can be raised when needed for debugging the firmware. For
# production, a low log level is recommended. Mainly because high volume log
# output might interfere with the API/WiFi connection stability. So when
# raising the log level, beware that you might see dropped connections from
# Home Assistant and the network log viewer.
logger:
  level: WARN

# ----------------------------------------------------------------------
# Hardware setup
# ----------------------------------------------------------------------

i2c:
  id: front_panel_i2c
  sda: GPIO21
  scl: GPIO19
  scan: true

output:
  - platform: ledc
    id: output_red
    pin: GPIO13
    frequency: 3000
    channel: 0
  - platform: ledc
    id: output_green
    pin: GPIO14
    frequency: 3000
    channel: 1
  - platform: ledc
    id: output_blue
    pin: GPIO5
    frequency: 3000
    channel: 2
  - platform: ledc
    id: output_white
    pin: GPIO12
    frequency: 10000
    channel: 4
  - platform: gpio
    id: output_master1
    pin: GPIO33
  - platform: gpio
    id: output_master2
    pin:
      number: GPIO4
      mode: OUTPUT
    # This float output can be used to control the front panel illumination +
    # level indicator LEDs. Value 0.0 turns off the illumination. Other values
    # (up to 1.0) turn on the illumination and set the level indicator to the
    # requested level.
  - platform: xiaomi_bslamp2
    id: my_front_panel_illumination

xiaomi_bslamp2:
  light:
    red: output_red
    green: output_green
    blue: output_blue
    white: output_white
    master1: output_master1
    master2: output_master2
  front_panel:
    i2c: front_panel_i2c 
    address: 0x2C
    trigger_pin: GPIO16