esphome-xiaomi_bslamp2/README.md

# ESPHome components for Xiaomi Mijia Bedside Lamp 2

[ [Changelog](CHANGELOG.md) | [License](LICENSE.md) | [Code of conduct](CODE_OF_CONDUCT.md) ]

The Bedside Lamp 2 is a smart RGBWW LED lamp, produced by Yeelight. It can
be controlled via the WiFi network and using a touch panel on the front of
the device. The touch panel contains a power button, a button that changes
the color of the light and a slider that can be used to change the
brightness of the light.

This project provides custom components for ESPHome, which make it
possible to fully control every aspect of the lamp and to integrate the
lamp in your Home Assistant setup.

## Features

* The lamp **integrates easily with Home Assistant** using the ESPHome integration.

* **The lamp no longer phones home to the Mijia Cloud.** Using this firmware,
  you can rest assured that the network traffic is limited to your own network.
  This matches the ideas behind Home Assistant, of providing a local home
  automation platform, that puts privacy first.

* **No more need for the LAN control option** to integrate the lamp with
  Home Assistant. Especially important, because Xiaomi decided in all their
  wisdom to remove LAN control from the device, breaking existing integrations.

* **The night light supports multiple colors**. The original firmware only supports
  a single warm white night light color.

* **Smooth light color transitions**, unlike the current version of the Yeelight
  integration. The Homekit integration does provide good transitions, but on my
  system, the color temperature white light mode is missing in the Home Assistant GUI.

* **Since the components of the lamp are exposed as ESPHome components, you
  don't have to stick with the lamp's original behavior**. You can hook up the
  lamp in your home automation as you see fit. Use the slider to control the
  volume of your audio set? Long press the power button to put your house in
  night mode? Use the illumination behind the slider bar to represent the
  progress of your sour dough bread bulk fermentation?
  Go ahead, make it so! :-)
 
* **Possibilities to extend the device's functionality through hardware mods.**
  There are [GPIO pins that are not in use](doc/hardware.md#esp32-pinout).
  If "tinkerer" is your middle name, you can use those pins to come up with
  your own hardware hacks to extend the device's functionality. 

## Quick start guide

For those who have experience with flashing ESPHome onto devices:

* Clone the [GitHub repo](https://github.com/mmakaay/esphome-xiaomi_bslamp2)
  into your ESPHome `config/custom_components` directory.
* Copy `[doc/example.yaml](doc/example.yaml)` to `config/your_device_name.yaml`.
* Modify the configuration to your needs (see the [configuration guide](doc/configuration.md)).
* Compile the `firmware.bin` file and download it to the device to which you
  have connected your serial to USB adapter (FTDI).
* [Open up the lamp](doc/flashing.md#opening-the-lamp-to-expose-the-pcb) and connect
  its `TX`, `RX`, `GND` and `GPIO0` debug pads to the serial adapter. Check this
  [image for the debug pad locations](doc/images/09_debug_pads_for_soldering.jpg).
* Power up the lamp with `GPIO0` connected to GND to enable flashing mode.
* Flash `firmware.bin` onto the device.

If you experience regular disconnects between Home Assistant and the lamp,
then take a look at the [known issues document](doc/known_issues.md).

## Table of contents

* [Why custom firmware?](doc/why_custom_firmware.md)
* [Installation guide](doc/installation.md)
* [Configuration_guide](doc/configuration.md)
* [Flashing guide](doc/flashing.md)
* [Known issues](doc/known_issues.md)
* [Hardware information](doc/hardware.md)
* [Sponsoring](doc/sponsoring.md)