esphome-xiaomi_bslamp2/packages/core.yaml

# --------------------------------------------------------------------------
# Xiaomi Mija Bedside Lamp 2 core configuration
# --------------------------------------------------------------------------

substitutions:
  name: bedside-lamp
  friendly_name: Bedside Lamp
  light_name: ${friendly_name} RGBWW Light
  light_mode_text_sensor_name: ${friendly_name} Light Mode
  default_transition_length: 800ms

esphome:
  name: ${name}

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_FREERTOS_UNICORE: y
    advanced:
      ignore_efuse_mac_crc: true

# Retrieve the code for the xiaomi_bslamp2 platform from GitHub.
external_components:
  - source: github://mmakaay/esphome-xiaomi_bslamp2@dev
    refresh: 60s

# Disable the reboot timeout. By default, the lamp reboots after 15
# minutes without any client connections (e.g. when home assistant is off
# line, or when the WiFi is broken). Reboots are annoying though, because
# the RGBWW LEDs will turn off during the reboot, causing the light to
# flicker.
api:
  reboot_timeout: 0s

# ----------------------------------------------------------------------
# Hardware configuration
# ----------------------------------------------------------------------

i2c:
  id: front_panel_i2c
  sda: GPIO21
  scl: GPIO19
  scan: true

output:
  - platform: ledc
    id: output_red
    pin: GPIO13
    frequency: 3000
    channel: 0
  - platform: ledc
    id: output_green
    pin: GPIO14
    frequency: 3000
    channel: 1
  - platform: ledc
    id: output_blue
    pin: GPIO5
    frequency: 3000
    channel: 2
  - platform: ledc
    id: output_white
    pin: GPIO12
    frequency: 10000
    channel: 4
  - platform: gpio
    id: output_master1
    pin: GPIO33
  - platform: gpio
    id: output_master2
    pin:
      number: GPIO4
      mode: OUTPUT

xiaomi_bslamp2:
  light:
    red: output_red
    green: output_green
    blue: output_blue
    white: output_white
    master1: output_master1
    master2: output_master2
  front_panel:
    i2c: front_panel_i2c 
    address: 0x2C
    trigger_pin: GPIO16