|
|
- substitutions:
- name: bedside_lamp
- friendly_name: Bedside Lamp
- transition_length: 1s
-
- # Use your own preferences for these components.
-
- wifi:
- #ssid: "Your-SSID"
- #password: "Your-Password"
- #use_address: 192.168.10.12
- #
- # Enable fallback hotspot (captive portal) in case wifi connection fails
- #ap:
- # ssid: "Bedside_lamp_$name"
- # password: "bedside2021"
-
- captive_portal:
- api:
- ota:
- logger:
-
- # Special platform + package are used for enabling unicore and disabling the
- # efuse mac crc check. These two changes are required for the ESP32-WROOM-32D
- # that is used in the Yeelight bedside lamp 2.
- esphome:
- name: $name
- platform: ESP32
- board: esp32doit-devkit-v1
- platformio_options:
- platform: espressif32@1.11.0
- platform_packages: |-4
- framework-arduinoespressif32 @ https://github.com/pauln/arduino-esp32.git#solo-no-mac-crc/1.0.4
-
- # This yeelight_bs2 comopnent acts as the hub for the device. Other
- # components talk to the hardware via this component. Normally, you
- # wouldn't need to change anything in the default implementation. You
- # can even fully omit this element from the configuration.
- yeelight_bs2:
- - red_id: TheRedOne
- - red: GPIO13
- - green_id: TheGreenOne
- - green: GPIO14
- - blue_id: TheBlueOne
- - blue: GPIO5
- - white_id: TheWhiteOne
- - white: GPIO12
- - master1_id: TheFirstMaster
- - master1: GPIO33
- - master2_id: TheSecondMaster
- - master2: GPIO4
- - sda: GPIO21
- - scl: GPIO19
- - trigger_pin: GPIO16
-
- # This component controls the light of the device.
- light:
- - platform: yeelight_bs2
- name: ${friendly_name} RGBW Light
- default_transition_length: ${transition_length}
- # You can use any effects that you like. These are just examples.
- effects:
- - random:
- name: "Slow Random"
- transition_length: 30s
- update_interval: 30s
- - random:
- name: "Fast Random"
- transition_length: 3s
- update_interval: 3s
-
|
