From 43a249ba8dfdb697f9d585aed585c289584f020a Mon Sep 17 00:00:00 2001 From: Maurice Makaay Date: Sun, 18 Apr 2021 13:55:32 +0200 Subject: [PATCH] Added sponsoring link. --- README.md | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/README.md b/README.md index 5266bb5..0dacddd 100644 --- a/README.md +++ b/README.md @@ -7,33 +7,33 @@ the color of the light and a slider that can be used to change the brightness of the light. This project provides a custom component for ESPHome, which makes it -possible to fully control every aspect of the lamp. +possible to fully control every aspect of the lamp and to integrate the +lamp in your Home Assistant setup. ## Quick start guide -For those who have experience with flashing ESPHome onto devices, here's a -quick start guide: +For those who have experience with flashing ESPHome onto devices: * Clone the [GitHub repo](https://github.com/mmakaay/esphome-xiaomi_bslamp2) into your ESPHome `config/custom_components` directory. -* Copy `config/custom_components/xiaomi_bslamp2/doc/example.yaml` to - `config/your_device_name.yaml` and modify it to your needs. +* Copy `[doc/example.yaml](doc/example.yaml)` to `config/your_device_name.yaml`. +* Modify the configuration to your needs (see the [configuration guide](doc/configuration.md)]). * Compile the `firmware.bin` file and download it to the device to which you - have connected a serial to USB adapter (FTDI). + have connected your serial to USB adapter (FTDI). * Open up the lamp and connect its `TX`, `RX`, `GND` and `GPIO0` debug pads - to the serial adapter (see the [detailed installation - guide](doc/install.md) for the debug pad locations). + to the serial adapter (see the [installation + guide](doc/installation.md) for the debug pad locations). * Power up the lamp with `GPIO0` connected to GND to enable flashing mode. * Flash `firmware.bin` onto the device. If you experience regular disconnects between Home Assistant and the lamp, then take a look at the [known issues document](doc/known_issues.md). -## Table of contents: +## Table of contents * [Why custom firmware?](doc/why_custom_firmware.md) * [Installation guide](doc/installation.md) * [Configuration_guide](doc/configuration.md) * [Flashing guide](doc/flashing.md) * [Known issues](doc/known_issues.md) - +* [Sponsoring](doc/sponsoring.md)