abhas
/
esphome-xiaomi_bslamp2
1
0
Fork 0
Code Issues 0 Pull Requests 0 Projects 0 Releases 16 Wiki Activity
Browse Source

Merge pull request #3 from tabacha/docu-url-fix 

Docu url fix copy soldering points jpeg to github
pull/4/head
Maurice Makaay 3 years ago
committed by GitHub
parent
9edea79ff7 8a0245a2e3
commit
8c7ccfb995
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 4 additions and 4 deletions
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +4
    -4
      doc/FLASHING.md
  2. BIN
      doc/Soldering_points.jpeg

+ 4
- 4
doc/FLASHING.md View File

@ -43,7 +43,7 @@ is not directly connected to the 3.3V Vin of the ESP32 chip, making it a
less than optimal candidate for powering the board during flashing. Instead, less than optimal candidate for powering the board during flashing. Instead,
powering the lamp using its own power supply works best. powering the lamp using its own power supply works best.
![Soldering points of a yeelight](https://community-assets.home-assistant.io/optimized/3X/1/3/1340a2367e5894281ac6d042f328d9db80ae7da4_2_790x750.jpeg)
![Soldering points of a yeelight](Soldering_points.jpeg)
You can use some sticky tape to fixate the cables before soldering. You can use some sticky tape to fixate the cables before soldering.
@ -70,7 +70,7 @@ to find another way to attach GPIO0 to ground. Some options:
- Use a breadbord, so you can connect the USB Adapter GND pin to a row on - Use a breadbord, so you can connect the USB Adapter GND pin to a row on
the bread bord, and connect the GND and GPIO0 wires of the board to that the bread bord, and connect the GND and GPIO0 wires of the board to that
same row.
same row.
- Solder a button on the board that connects GPIO0 to GND when pressed. Then - Solder a button on the board that connects GPIO0 to GND when pressed. Then
you can hold down this button while plugging in the device's power supply. you can hold down this button while plugging in the device's power supply.
@ -89,7 +89,7 @@ to find another way to attach GPIO0 to ground. Some options:
- You could opt for temporarily soldering a lead between GND and GPIO0 on - You could opt for temporarily soldering a lead between GND and GPIO0 on
the board, making GPIO0 pulled to ground permanently. It is a bit less the board, making GPIO0 pulled to ground permanently. It is a bit less
flexible than some other options, but if you only need to do the initial flexible than some other options, but if you only need to do the initial
backup and firmware flash of the device, then this can bee all that you
backup and firmware flash of the device, then this can bee all that you
need. Remove the lead after flashing is done, otherwise the device won't need. Remove the lead after flashing is done, otherwise the device won't
boot in normal mode. boot in normal mode.
@ -143,7 +143,7 @@ Compile the firmware for the device and download the `firmware.bin` file
to the device to which the serial adapter is connected. to the device to which the serial adapter is connected.
You can flash the device using esphome or esptool. You can flash the device using esphome or esptool.
I normally use the [esphome-flasher](https://github.com/esphome/esphome-flasher)
I normally use the [esphome-flasher](https://github.com/esphome/esphome-flasher)
tool, which is a very easy to use GUI utility app for flashing ESPHome devices: tool, which is a very easy to use GUI utility app for flashing ESPHome devices:
- In the app, select the COM port of your serial adapter - In the app, select the COM port of your serial adapter


BIN
doc/Soldering_points.jpeg View File

Before After
Width: 790  |  Height: 750  |  Size: 182 KiB

Write Preview
Loading…
Cancel
Save