From c96b24236e3821131aa1c790d73d6356a8788ca1 Mon Sep 17 00:00:00 2001 From: Maurice Makaay Date: Thu, 29 Apr 2021 17:35:13 +0200 Subject: [PATCH] Update hardware.md --- doc/hardware.md | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/doc/hardware.md b/doc/hardware.md index 4277c9e..daf4235 100644 --- a/doc/hardware.md +++ b/doc/hardware.md @@ -51,12 +51,12 @@ represent the actual brightness setting of the device. In the following image, you can find the pinout as used for the ESP32: - + Here's an overview of all exposed pins of the chip, starting at the GND + 3.3V pins, and going anti-clockwise. The table shows not only the functions of the pins that are actually in use by the lamp's circuitry, but also the -pins that are not in use and their possible applications. +pins that are not in use and their possible use. | PIN | GPIO# | Function | Description | Possible use | |------|--------|-----------|--------------------------------|--------------| @@ -119,7 +119,7 @@ this [ESP32 pinout reference information](https://randomnerdtutorials.com/esp32- ## Front panel - + The front panel is a stand-alone component, with its own control chip (KungFu KF8TS2716). Communication between the ESP32 and the front panel @@ -159,21 +159,21 @@ Commands can be written to the front panel at any time. The available commands are: -| Command | Byte sequence to send | -|-------------------|-----------------------| -| `TURN PANEL ON` | 02 03 5E 00 64 00 00 | -| `TURN PANEL OFF` | 02 03 0C 00 64 00 00 | -| `SET LEVEL 1` | 02 03 5E 00 64 00 00 | -| `SET LEVEL 2` | 02 03 5F 00 64 00 00 | -| `SET LEVEL 3` | 02 03 5F 80 64 00 00 | -| `SET LEVEL 4` | 02 03 5F C0 64 00 00 | -| `SET LEVEL 5` | 02 03 5F E0 64 00 00 | -| `SET LEVEL 6` | 02 03 5F F0 64 00 00 | -| `SET LEVEL 7` | 02 03 5F F8 64 00 00 | -| `SET LEVEL 8` | 02 03 5F FC 64 00 00 | -| `SET LEVEL 9` | 02 03 5F FE 64 00 00 | -| `SET LEVEL 10` | 02 03 5F FF 64 00 00 | -| `READY FOR EVENT` | 01 00 00 00 00 00 01 | +| Command | Byte sequence to send | +|-----------------|-----------------------| +| TURN PANEL ON | 02 03 5E 00 64 00 00 | +| TURN PANEL OFF | 02 03 0C 00 64 00 00 | +| SET LEVEL 1 | 02 03 5E 00 64 00 00 | +| SET LEVEL 2 | 02 03 5F 00 64 00 00 | +| SET LEVEL 3 | 02 03 5F 80 64 00 00 | +| SET LEVEL 4 | 02 03 5F C0 64 00 00 | +| SET LEVEL 5 | 02 03 5F E0 64 00 00 | +| SET LEVEL 6 | 02 03 5F F0 64 00 00 | +| SET LEVEL 7 | 02 03 5F F8 64 00 00 | +| SET LEVEL 8 | 02 03 5F FC 64 00 00 | +| SET LEVEL 9 | 02 03 5F FE 64 00 00 | +| SET LEVEL 10 | 02 03 5F FF 64 00 00 | +| READY FOR EVENT | 01 00 00 00 00 00 01 | *Note: The `READY FOR EVENT` command is only used when a new event is provided by the front panel. Information about this command can be found in the next