abhas
/
esphome-xiaomi_bslamp2
1
0
Fork 0
Code Issues 0 Pull Requests 0 Projects 0 Releases 16 Wiki Activity
Browse Source

Update FLASHING.md 

Added missing GPIO0 reference to the soldering section.
pull/3/head
Maurice Makaay 3 years ago
committed by GitHub
parent
956660c2bf
commit
fe3fd69052
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +1
    -1
      doc/FLASHING.md

+ 1
- 1
doc/FLASHING.md View File

@ -37,7 +37,7 @@ connect the wires of a device. Therefore, I find it most useful to take some
dupont wires with a female end to them, and cut off the other end. Strip the dupont wires with a female end to them, and cut off the other end. Strip the
wire on the other and, and then it can be used to solder it to the board. wire on the other and, and then it can be used to solder it to the board.
Solder the wires to the RX, TX and GND debug pads that are shown in this
Solder the wires to the RX, TX, GND and GPIO0 debug pads that are shown in this
photo. It is not required to solder a wire to the 3.3V debug pad. This pad photo. It is not required to solder a wire to the 3.3V debug pad. This pad
is not directly connected to the 3.3V Vin of the ESP32 chip, making it a is not directly connected to the 3.3V Vin of the ESP32 chip, making it a
less than optimal candidate for powering the board during flashing. Instead, less than optimal candidate for powering the board during flashing. Instead,


Write Preview
Loading…
Cancel
Save