You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
54 lines
1.9 KiB
54 lines
1.9 KiB
#pragma once
|
|
|
|
#include "common.h"
|
|
|
|
namespace esphome {
|
|
namespace yeelight {
|
|
namespace bs2 {
|
|
|
|
class ColorNightLight : public GPIOOutputs {
|
|
public:
|
|
bool set_light_color_values(light::LightColorValues v) {
|
|
// This class can handle the GPIO outputs for the night light mode.
|
|
//
|
|
// At the lowest brightness setting, switch to night light mode.
|
|
// In the Yeelight integration in Home Assistant, this feature is
|
|
// exposed trough a separate switch. I have found that the switch
|
|
// is both confusing and made me run into issues when automating
|
|
// the lights.
|
|
// I don't simply check for a brightness at or below 0.01 (1%),
|
|
// because the lowest brightness setting from Home Assistant
|
|
// turns up as 0.011765 in here (which is 3/255).
|
|
if (v.get_brightness() >= 0.012f) {
|
|
return false;
|
|
}
|
|
|
|
values = v;
|
|
|
|
// This night light mode is activated when white light is selected.
|
|
// Based on measurements using the original device firmware, so it
|
|
// matches the night light of the original firmware.
|
|
if (v.get_white() > 0) {
|
|
red = 0.968f;
|
|
green = 0.968f;
|
|
blue = 0.972f;
|
|
white = 0.0f;
|
|
}
|
|
// In RGB mode, the selected color is used to give the night light
|
|
// a specific color, instead of the default. This is a nice extra
|
|
// for this firmware, as the original firmware does not support it.
|
|
else {
|
|
red = 0.9997f - v.get_red() * (0.9997f - 0.9680f);
|
|
green = 0.9997f - v.get_green() * (0.9997f - 0.9680f);
|
|
auto blue_on = 0.9720f + (0.9680f - 0.9720f) * (1.0f - (v.get_red() + v.get_green())/2.0f);
|
|
blue = 0.9997f - v.get_blue() * (0.9997f - blue_on);
|
|
white = 0.0f;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
};
|
|
|
|
} // namespace yeelight_bs2
|
|
} // namespace yeelight
|
|
} // namespace bs2
|