abhas
/
esphome-xiaomi_bslamp2


								# --------------------------------------------------------------------------

								# A few practical configuration substitutions.

								# --------------------------------------------------------------------------


								substitutions:

								  name: bedside_lamp

								  friendly_name: Bedside Lamp

								  transition_length: 500ms


								  # Some derived identifiers for the device components.

								  id_light: ${name}

								  id_front_panel_light: ${name}_front_panel_light

								  id_front_panel_output: ${name}_front_panel_output

								  id_power_button: ${name}_power_button

								  id_color_button: ${name}_color_button

								  id_slider_level: ${name}_slider_level


								# --------------------------------------------------------------------------

								# Use your own preferences for these components.

								# --------------------------------------------------------------------------


								wifi:

								  ssid: "Your-SSID"

								  password: "Your-Password"

								  use_address: 192.168.10.12


								  # Enable fallback hotspot (for captive portal) in case wifi connection fails

								  ap:

								    ssid: "ESPHome $friendly_name"

								    password: "bedside2021"


								captive_portal:


								api:


								ota:


								logger:


								# --------------------------------------------------------------------------

								# Configuration specific for the Yeelight Bedside Lamp 2.

								# --------------------------------------------------------------------------


								# Special platform + package are used for enabling unicore and disabling the

								# efuse mac crc check. These two changes are required for the ESP32-WROOM-32D

								# chip that is used in the device.

								esphome:

								  name: ${name}

								  platform: ESP32

								  board: esp32doit-devkit-v1

								  platformio_options:

								    platform: espressif32@3.2.0

								    platform_packages: |-4

								        framework-arduinoespressif32 @ https://github.com/pauln/arduino-esp32.git#solo-no-mac-crc/1.0.6


								light:

								  # This component controls the LED lights of the device.

								  - platform: yeelight_bs2

								    id: ${id_light}

								    name: ${friendly_name} RGBW Light

								    default_transition_length: ${transition_length}

								    # When the brightness is changed, then update the level indication

								    # on the front panel accordingly. In night light mode, turn off

								    # the front panel illumination.

								    on_brightness:

								      then:

								        - output.set_level:

								            id: ${id_front_panel_output}

								            level: !lambda if (x < 0.012f) return 0; else return x;

								    # You can use any effects that you like. These are just examples.

								    effects:

								      - random:

								          name: "Slow Random"

								          transition_length: 30s

								          update_interval: 30s

								      - random:

								          name: "Fast Random"

								          transition_length: 3s

								          update_interval: 3s


								  # A fun thing you could do with the front panel output component

								  # (as defined below): wrap it in a light component, so you can

								  # treat the front panel illumination as a monochromatic light

								  # from within Home Assitant.

								  # This is primarily a demo. It's barely useful for a device that

								  # one has running in production.

								  - platform: monochromatic

								    name: $friendly_name Front Panel Light

								    id: ${id_front_panel_light}

								    output: ${id_front_panel_output}

								    default_transition_length: 0s

								    gamma_correct: 1

								    effects:

								      - lambda:

								          name: Random Level

								          update_interval: 150ms

								          lambda: |-

								            auto call = id(${id_front_panel_light}).turn_on();

								            call.set_transition_length(150);

								            call.set_brightness(random_float());

								            call.perform();


								# This output controls the front panel illumination + level indication.

								# Value 0.0 turns off the illumination.

								# Other values (up to 1.0) turn on the illumination and set the level

								# indication to the requested level.

								output:

								  - platform: yeelight_bs2

								    id: ${id_front_panel_output}


								# Binary sensors can be created for handling front panel touch / release

								# events. To specify what part of the front panel to look at, the "part"

								# parameter can be set to: "any" (i.e. the default), "power button",

								# "color button" or "slider".

								binary_sensor:

								  # When touching the power button, toggle the light.

								  # When holding the power button, turn on night light mode.

								  - platform: yeelight_bs2

								    id: ${id_power_button}

								    part: power button

								    on_multi_click:

								    - timing:

								        - ON for at most 0.8s

								      then:

								        - light.toggle: ${id_light}

								    - timing:

								        - ON for at least 0.8s

								      then:

								        - light.turn_on:

								            id: ${id_light}

								            red: 1

								            green: 1

								            blue: 1

								            brightness: 0.01


								  # When touching the color button, set a random color.

								  - platform: yeelight_bs2

								    id: ${id_color_button}

								    part: color button

								    on_multi_click:

								    - timing:

								        - ON for at most 0.8s

								      then:

								        - light.turn_on:

								            id: ${id_light}

								            red: !lambda return random_float();

								            green: !lambda return random_float();

								            blue: !lambda return random_float();


								# This sensor component publishes touch events for the front panel slider.

								# The published value represents the level at which the slider was touched.

								# By default, values range from 0.01 to 1.00 (in 20 steps). This range can

								# be modified using the "range_from" and "range_to" parameters.

								sensor:

								  # When the slider is touched, update the brightness.

								  # Brightness 0.01 initiates the light night mode, which has already

								  # been handled above. Therefore, brightness starts from 0.02 here,

								  # so night mode is not triggered from the slider.

								  - platform: yeelight_bs2

								    id: ${id_slider_level}

								    range_from: 0.02

								    on_value:

								      then:

								        - light.turn_on:

								            id: ${id_light}

								            brightness: !lambda return x;