You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
109 lines
3.0 KiB
109 lines
3.0 KiB
# --------------------------------------------------------------------------
|
|
# Substitutions as used by the configuration packages
|
|
# These can be overriden from the main device configuration file.
|
|
# --------------------------------------------------------------------------
|
|
|
|
substitutions:
|
|
name: bedside-lamp
|
|
friendly_name: Bedside Lamp
|
|
light_name: ${friendly_name} RGBWW Light
|
|
light_mode_text_sensor_name: ${friendly_name} Light Mode
|
|
default_transition_length: 800ms
|
|
|
|
# --------------------------------------------------------------------------
|
|
# Core setup
|
|
# --------------------------------------------------------------------------
|
|
|
|
esphome:
|
|
name: ${name}
|
|
|
|
esp32:
|
|
board: esp32doit-devkit-v1
|
|
framework:
|
|
type: esp-idf
|
|
sdkconfig_options:
|
|
CONFIG_FREERTOS_UNICORE: y
|
|
advanced:
|
|
ignore_efuse_mac_crc: true
|
|
|
|
# Retrieve the code for the xiaomi_bslamp2 platform from a local clone
|
|
# of the github repository, in the same directory as the config file.
|
|
external_components:
|
|
- source:
|
|
type: local
|
|
path: ./esphome-xiaomi_bslamp2/components
|
|
|
|
# Disable the reboot timeout. By default, the lamp reboots after 15
|
|
# minutes without any client connections (e.g. when home assistant is off
|
|
# line, or when the WiFi is broken). Reboots are annoying though, because
|
|
# the RGBWW LEDs will turn off during the reboot, causing the light to
|
|
# flicker.
|
|
api:
|
|
reboot_timeout: 0s
|
|
|
|
# The log level can be raised when needed for debugging the firmware. For
|
|
# production, a low log level is recommended. Mainly because high volume log
|
|
# output might interfere with the API/WiFi connection stability. So when
|
|
# raising the log level, beware that you might see dropped connections from
|
|
# Home Assistant and the network log viewer.
|
|
logger:
|
|
level: WARN
|
|
|
|
# ----------------------------------------------------------------------
|
|
# Hardware setup
|
|
# ----------------------------------------------------------------------
|
|
|
|
i2c:
|
|
id: front_panel_i2c
|
|
sda: GPIO21
|
|
scl: GPIO19
|
|
scan: true
|
|
|
|
output:
|
|
- platform: ledc
|
|
id: output_red
|
|
pin: GPIO13
|
|
frequency: 3000
|
|
channel: 0
|
|
- platform: ledc
|
|
id: output_green
|
|
pin: GPIO14
|
|
frequency: 3000
|
|
channel: 1
|
|
- platform: ledc
|
|
id: output_blue
|
|
pin: GPIO5
|
|
frequency: 3000
|
|
channel: 2
|
|
- platform: ledc
|
|
id: output_white
|
|
pin: GPIO12
|
|
frequency: 10000
|
|
channel: 4
|
|
- platform: gpio
|
|
id: output_master1
|
|
pin: GPIO33
|
|
- platform: gpio
|
|
id: output_master2
|
|
pin:
|
|
number: GPIO4
|
|
mode: OUTPUT
|
|
# This float output can be used to control the front panel illumination +
|
|
# level indicator LEDs. Value 0.0 turns off the illumination. Other values
|
|
# (up to 1.0) turn on the illumination and set the level indicator to the
|
|
# requested level.
|
|
- platform: xiaomi_bslamp2
|
|
id: my_front_panel_illumination
|
|
|
|
xiaomi_bslamp2:
|
|
light:
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
white: output_white
|
|
master1: output_master1
|
|
master2: output_master2
|
|
front_panel:
|
|
i2c: front_panel_i2c
|
|
address: 0x2C
|
|
trigger_pin: GPIO16
|