abhas
/
esphome-xiaomi_bslamp2
1
0
Fork 0
Code Issues 0 Pull Requests 0 Projects 0 Releases 16 Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
123 Commits
11 Branches
67 MiB
 
 
Tree: fff529c7a2
Branches Tags
${ item.name }
Create branch ${ searchTerm }
from 'fff529c7a2'
${ noResults }
esphome-xiaomi_bslamp2/README.md

1.8 KiB
Raw Blame History

ESPHome component for Xiaomi Mijia Bedside Lamp 2

The Bedside Lamp 2 is a smart RGBWW LED lamp, produced by Yeelight. It can be controlled via the WiFi network and using a touch panel on the front of the device. The touch panel contains a power button, a button that changes the color of the light and a slider that can be used to change the brightness of the light.

This project provides a custom component for ESPHome, which makes it possible to fully control every aspect of the lamp and to integrate the lamp in your Home Assistant setup.

Quick start guide

For those who have experience with flashing ESPHome onto devices:

  • Clone the GitHub repo into your ESPHome config/custom_components directory.
  • Copy [doc/example.yaml](doc/example.yaml) to config/your_device_name.yaml.
  • Modify the configuration to your needs (see the configuration guide]).
  • Compile the firmware.bin file and download it to the device to which you have connected your serial to USB adapter (FTDI).
  • Open up the lamp and connect its TX, RX, GND and GPIO0 debug pads to the serial adapter (see the installation guide for the debug pad locations).
  • Power up the lamp with GPIO0 connected to GND to enable flashing mode.
  • Flash firmware.bin onto the device.

If you experience regular disconnects between Home Assistant and the lamp, then take a look at the known issues document.

Table of contents