Since 'Enter' is also a submit button and another style gets applied,
both seem to overlap. Not very important on a desktop, but might be
easier to navigate on mobile screen
(plus, move settings backup buttons back at the top, accidentally moved
those to the bottom in the previous commit)
On the DEBUG page as well, trying to fix the scrolling behaviour when the
logging stream just started and will only jump after it spends some time at
the top row. Watching the element state to pause the autoscroll when we
manually move the slider, and resume it once the slider touches the bottom
of the textarea. Entering the command will reset the state and enable
the autoscrolling immediately
- remove 'local' index and replace sensor code depending on it with the
existing 'slot' aka 'magnitude index' used in value() and type()
- common method to store and retrieve ratios for voltage, current,
active power and energy. default implementation is no-op, sensor
should implement ratio adjustment & calculations to use 'slot' indexes
- re-implement 'expected' values ui. display the actual ratio values,
and have a separate page for updating them in a more apparent way
- remove legacy settings that were adjusting expected values
- remove legacy settings that were resetting ratios and analog calibration
- generic webui action caller, add ratios and analog calibration resets
all of 'emon' sensors were updated to utilize the new approach to the
ratio handling. pulsemeter is somewhat an outlier, but it is unclear
whether removing the energy ratio is justified
terminal part was also updated
- implement `expected` command that hooks into the new ratioFromValue
(and what webui uses to calculate ratios)
- implement `energy` command to list only MAGNITUDE_ENERGY
- remove old pzem004t commands doing ratio reset and total energy count
another global update is related to espurna::duration
- rework module-local heartbeat and led durations into a global
espurna::duration
- update sensor internals to use specific units instead of multiplying things
on line-by-line basis. export count() to the api
Otherwise, some things are still hidden
(or, depend on the order of incoming messages)
Make thermostat code use those as well, instead of injecting
thermostatVisible in every json payload
Refactor WebUI:
- remove jquery dependency from the base custom.js and use vanilla JS
- remove jquery + jquery-datatables dependency from the RFM69 module
- replace jquery-datatables handlers with pure-css table + some basic cell filtering
(may be incomplete, but tbh it is not worth additional 50Kb to the .bin size)
- introduce a common way to notify about the app errors, show small text notification
at the top of the page instead of relying on user to find out about errors by using the Web Developer Tools
- replace <span name=...> with <span data-settings-key=...>
- replace <div> templates with <template>, disallowing modification
without an explicit DOM clone
- run `eslint` on html/custom.js and `html-validate` on html/index.html,
and fix issues detected by both tools
Streamline settings group handling in custom.js & index.html
- drop module-specific button-add-... in favour of button-add-settings-group
- only enforce data-settings-max requirement when the property actually exists
- re-create label for=... and input id=... when settings group is
modified, so checkboxes refer to the correct element
- introduce additional data-... properties to generalize settings group additions
- introduce Enumerable object to track some common list elements for
<select>, allow to re-create <option> list when messages come in
different order
Minor fixes that also came with this:
- fix relay code incorrectly parsing the payload, causing no relay names
to be displayed in the SWITCHES panel
- fix scheduler code accidentally combining keys b/c of the way C parses
string literals on separate lines, without any commas in-between
- thermostat should not reference tmpUnit directly in the webui, replace with
module-specific thermostatUnit that is handled on the device itself
- fix index.html initial setup invalid adminPass ids
- fix index.html layout when removing specific schedules
Ratio, Mains are specific to a magnitude type.
Make keys use global index, and do a (temporary) WebUI workaround
to use 0 index instead of the global key.
Migrate to the new settings keys.
Local magnitude-specific index is still in play, pending changes in the rest of sensors
(ADE7953, PZEM004T{,V30}, ...) to remove it completely.
Local sensor index could still be useful though, to help out with some settings
in the future as we don't really enforce magnitude type uniqueness within sensors.
inline-source uses 'image/ico' otherwise
supposed to be fixed upstream via the usage of type="image/x-icon" as
link attribute, but there's no npmjs release yet
- retain setting
- generate topic and message in the discovery object instead of
creating them all at once
- re-implement relays, lights and sensors discovery
- rework name normalization, use relative magnitude indexes
- replace original lights code with schema: json, subscribe to a special
topic to handle lights instead of using the common API
(still wip - colors, hs, temperature settings)
resolve#630resolve#1564resolve#2403
- shrink utils source file, move heartbeat and boot management into system
- improvise with 'heartbeat' functionality. include scheduler implementation that will
manage the per-module heartbeat callbacks with individual 'mode' and
'interval' settings. current ones are mqtt (including relays, lights, thermostat), debug and
influxdb. preserve heartbeat NONE, ONCE and REPEAT, REPEAT_STATUS is effectively a hbReport & status bit.
- mqtt heartbeat is managed through mqttHeartbeat() callbacks
- tweak mqtt callbacks to use lists instead of the vector, slighly reducing the size of the .bin
- update WebUI, include report setting and update hbMode values
- make sure general.h settings include new heartbeat,
move constant definitions outside of the header
- correctly include dependencies through the .cpp, avoid leaking
internal details.
- as a side-effect, base headers are no longer included recursively
update to terser v5
replace gulp-remove-code with a rough equivalent in the gulpscript itself
replace gulp-inline with gulp-inline-source-html
remove base64 modules as redundant when running inline-source (does both)
remove crass as redundant when running inline-source (uses csso)
fixup jquery source map comment (but still keep the actual file)
at least now this seems stable enough to start more of the ui tweaking
pure-css 1.0.0 -> 2.0.3
datatable 1.10.16 -> 1.10.23
generic jquery-slim -> custom jquery/jquery@a32cf6324f8f2190e66a687e94be9687ebf840b7 slim build with an addition of -sizzle
does not seem to be breaking anything (yet)
ref. https://github.com/xoseperez/espurna/issues/1132#issuecomment-431868924
it is slightly bigger, but better looking and no jquery dependency
rework colorpicker style as well, hide to prevent sending garbage when
lights are off. update lights module to send `lightState()` and separate
state from status payloads
yes, input[type="color"] is an option, but it does not look good
support es6 syntax
use js comment style in custom.js
only minify the custom.js
using 4.x branch, since 5.x wants async / await and more changes to the gulp script
- gpio module now tracks the known providers (right now, hardware and mcp expander)
- refactored relay struct to use 'Provider' implementing setup,notify,change,boot instead of just BasePin actions
- refactored button module to use gpio provider instead of referencing types itself
- removed dual & stm code from buttons, migrate both to relay module
- added status notify and change callbacks for relayStatus (i.e. 'notify' when relay status was called, but not changed. and 'changed' when it did)
- relays runtime configuration keys
- relay command now shows configured relays and current & target statuses
- refactor the code using relayStatus(0, blah) under LIGHT_PROVIDER check to use lightState instead
- remove rfbridge code form relay module. implement through a basic state listener in the rfbridge module, depend on RELAY_SUPPORT
- allow to bind rf codes to real relays
- drop tuya-specific lights provider, remove tuya code from relays and lights modules
- integrate tuya via relay listeners and providers, use lights custom provider
- implement channel transitions for tuya. disabled by default, and transition time and step are overridden to 2000 + 100. needs to be set to some value below the total time (i.e. `total transition time / step time == number of steps`, we need to figure out a correct time that serial comms could handle)
- lights custom provider (global, not per-pin) and state listeners
- remove lights code from relay module. implement through providers & listeners in the lights module, depend on RELAY_SUPPORT
- lights per-channel relay provider (unused atm), depend on RELAY_SUPPORT
- refactored channel transition - calculate step only once, make sure time + step values are sane, generate quick transitions with very small delay (10ms hardcoded) for transitions during OFF state i.e. we no longer waste 500ms (or whatever transition time is set to) on boot doing nothing
- transition time + step parameter for the lightUpdate
- report mask parameter for the lightUpdate
- minor fixes across the board
resolve#2222
resolve#2327, #2220
- remove legacy support in the webui
- format datetime strings on the device, use NTP panel to display them both
- migrate from the old ntpOffset + ntpDST + ntpRegion to ntpTZ
- support 32 byte hostname / ssid
- support 64 byte passphrase
- slightly reduce amount of memory allocations
- tweak initialization paths to call persistent(false) as early as possible
Add new V3.0 version of PZEM004T, not tested. Default to factory default address 0xf8, configurable through pzemv30Addr 8-bit number
Add 'frequency' measurement & 'hz' unit
Add pz.address that configures address
Implemented energy reset
Right now we only support a single device. No way to test this properly (mostly, how exactly we need to connect this stuff), so left as not implemented.
* Completed kingart curtain switch support:
Added Web UI controls and view in status
Added power up behaviour (nothing, close, open, last position)
Added curtain style (Roller, etc...) for UI status and to be used in MQTT
* Checked commit before PR. Added html gulp static files generated.
* Corrected a code refactor error which make the MQTT messages not handling position from received messages. Added comment to debug tab to show how to enable debug
* Use the maximum compression for gzip. A byte is a byte :)
* Update code/espurna/curtain_kingart.cpp
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
* Variable name prefix update
Added public set position function and curtain count
* Added Scheduler new type : curtain
* Add curtain schedule support and correct the 12h bug when adding a slot (00:00 after refresh). Default Hour is 12h
* Code cleaning.
Schedule support.
Light support is having an issue with new schedules corrected here.
* I let do better by the specialists
* Curtain init statues
* Coding style corrections
* Removed debug stuff from now - will be back later with the right way
* rebuild webui
* revert 435f1c5e03 schHour default, rebuild ui
Co-authored-by: Eric Chauvet <eric.chauvet@test-tree.com>
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
- Update sensor classes to support a generic way to store energy values
- Update sensor conversion code to deal with units and not magnitudes
- Add magnitude<->unit for sensors, generic way of defining used unit. Convert from sensor magnitude unit to the one used for display.
- Reset energy value based on index through external means (MQTT, HTTP)
- Rework energy timestamping, update webui with 'last saved' value
While this solves the energy conversion issues and we are finally seeing the real value, what I don't really like:
- KilowattHour and WattHour are separate enum tags, thus sort-of are different types altogether
- Conversion code in Energy object should probably use some generic 'ratio' calculation? (https://en.cppreference.com/w/cpp/numeric/ratio/ratio)
- We are still using runtime checks to do calculations and depend that sensor outputs only one specific value type.
Consider this a fix for energy display / storage and preliminary work on sensor.ino
Further sensor refactoring... soon.
Maxim Prokhorov
Eric Chauvet