You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
100 lines
3.9 KiB
100 lines
3.9 KiB
// ------------------------------------------------------------------------------
|
|
// Example file for custom.h
|
|
// Either copy and paste this file then rename removing the .example or create your
|
|
// own file: 'custom.h'
|
|
// This file allows users to create their own configurations.
|
|
// See 'code/espurna/config/general.h' for default settings.
|
|
//
|
|
// See: https://github.com/xoseperez/espurna/wiki/Software-features#enabling-features
|
|
// and 'code/platformio_override.ini.example' for more details.
|
|
// ------------------------------------------------------------------------------
|
|
|
|
|
|
// Example of a Sonoff Basic board with some options disabled to reduce firmware size.
|
|
|
|
#if defined(MY_SONOFF_BUILD01) // This section will be used when build_src_flags contains
|
|
// -DMY_SONOFF_BUILD01 in 'platformio_override.ini'
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_BASIC_BUILD01"
|
|
|
|
// Disable these
|
|
#define UART_SUPPORT 0
|
|
#define ALEXA_SUPPORT 0
|
|
#define DOMOTICZ_SUPPORT 0
|
|
#define HOMEASSISTANT_SUPPORT 0
|
|
#define THINGSPEAK_SUPPORT 0
|
|
|
|
// Buttons
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_CONFIG BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON1_RELAY 1
|
|
|
|
// Relays
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_TYPE RELAY_TYPE_NORMAL
|
|
|
|
// LEDs
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
|
|
// Example of the Sonoff Basic board above but with two buttons on different GPIOs.
|
|
// The two buttons both toggle the one RELAY but ALL button events send MQTT values.
|
|
// An MQTT based system can then carry out differnt functions depending on
|
|
// the 'DOUBLE CLICK, LONG CLICK OR LONG-LONG CLICK' trigger. A BMX280 environment
|
|
// sensor is also connected using I2C on GPIO 1 and 3.
|
|
|
|
#elif defined(MY_SONOFF_BUILD02) // This section will be used when build_src_flags contains
|
|
// -DMY_SONOFF_BUILD02 in 'platformio_override.ini
|
|
|
|
// Info - Custom Basic with BMX280 I2C on GPIO 1 and 3
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_BASIC_BMX280" // You can use your own name here
|
|
|
|
// Disable these
|
|
#define UART_SUPPORT 0
|
|
#define ALEXA_SUPPORT 0
|
|
#define DOMOTICZ_SUPPORT 0
|
|
#define HOMEASSISTANT_SUPPORT 0
|
|
#define THINGSPEAK_SUPPORT 0
|
|
|
|
// Always publish button events to MQTT
|
|
#define BUTTON_MQTT_SEND_ALL_EVENTS 1
|
|
|
|
// Buttons
|
|
#define BUTTON1_PIN 0 // Built in button.
|
|
#define BUTTON1_CONFIG BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_PRESS BUTTON_MODE_NONE
|
|
#define BUTTON1_CLICK BUTTON_MODE_TOGGLE
|
|
#define BUTTON1_DBLCLICK BUTTON_MODE_NONE
|
|
#define BUTTON1_LNGCLICK BUTTON_MODE_OFF
|
|
#define BUTTON1_LNGLNGCLICK BUTTON_MODE_NONE
|
|
|
|
#define BUTTON2_PIN 2 // External push button connected between IO2 and GND.
|
|
#define BUTTON2_CONFIG BUTTON_PUSHBUTTON | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON2_RELAY 1
|
|
#define BUTTON2_PRESS BUTTON_MODE_NONE
|
|
#define BUTTON2_CLICK BUTTON_MODE_TOGGLE
|
|
#define BUTTON2_DBLCLICK BUTTON_MODE_NONE
|
|
#define BUTTON2_LNGCLICK BUTTON_MODE_NONE
|
|
#define BUTTON2_LNGLNGCLICK BUTTON_MODE_NONE
|
|
|
|
// Relays
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_TYPE RELAY_TYPE_NORMAL
|
|
|
|
// LEDs
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
// Non-default I2C on hardware UART0 pins. Make sure to disable UART for these to work!
|
|
#define I2C_SDA_PIN 1
|
|
#define I2C_SCL_PIN 3
|
|
|
|
// BMX280 depends on I2C
|
|
#define BMX280_SUPPORT 1
|
|
#define BMX280_ADDRESS 0x76
|
|
|
|
#endif
|