espurna-mirror/CHANGELOG.md

ESPurna change log

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[1.9.4] 2017-09-22

Added

• Added ESPurna specific mDNS text registers (app_name, app_version, device_name)
• Crash dump info is stored in EEPROM and retrieved via terminal ("crash" command)
• Support for Huacanxing H802
• Support for powermeters based on V9261F IC
• Support for powermeters based on ECH1560 IC (beta, untested)

Changed

• Changed behaviour on MQTT connection failure (#215)
• Removed boot delay
• Refactor power modules
• Updated JustWifi library

Fixed

• Set all esp8285 devices to use esp01_1m (#210, #225)
• Removed wifi gain option since it prevents some devices to connect (#204)

[1.9.3] 2017-09-04

Added

• New "erase.config" option in terminal to delete SDK settings
• Added error code to error message when updating from web UI
• Fixed Web UI to be behind a proxy (http://tinkerman.cat/secure-remote-access-to-your-iot-devices/)
• Support "ON", "OFF" and "TOGGLE" (also lowercase) as payload in relay MQTT, API and WS (http://tinkerman.cat/using-google-assistant-control-your-esp8266-devices/)

Changed

• Updated fauxmoESP library to 2.2.0

Fixed

• Fix HLW8012 calibration (#194)
• Fix telnet dropping connection
• Fix WiFiSecureClient connection with PubSubClient (#64)

[1.9.2] 2017-08-31

Added

• System stability check (turns off everything except WIFI AP, OTA and telnet if there is a boot crash loop) (#196)
• Telnet support (enabled by default only on AP interface)
• Option to set WiFi gain from web UI
• Option to disable MQTT from web UI
• MQTT autodiscover, with the option to autoconnect if no broker defined
• Home Assistant MQTT autodiscover feature
• List enabled modules in INIT debug info
• Counter module (counts and reports transitions in a digital pin)

Changed

• Updated NoFUSS support
• Web UI documentation changes
• Changes in terminal commands ("reconnect" is now "reset.wifi", also new commands added)

Fixed

• Crash in settings saving (#190) and fixed UDP debug conditional build clauses

[1.9.1] 2017-08-27

Added

• Support to build without NTP support
• Added current time, uptime, free heap, firmware size and free space to web interface

Changed

• Changed settings keys for Itead Sonoff RF Bridge
• Disable Domoticz by default

Fixed

• Fixed build flags for DHT and DS18B20 in platformio.ini file
• Fixed Itead Sonoff B1 by updating the my9291 library
• Fixed light status on boot (#157)
• Fixed CSS bug cause by a bad merge

[1.9.0] 2017-08-25

Added

• Support for IteadStudio BN-SZ01 Ceiling Light (#132)
• Support for IteadStudio Sonoff RF Bridge (#173)
• Support for IteadStudio Sonoff 4CH Pro (#174)
• Support for IteadStudio Sonoff B1
• Support for IteadStudio Sonoff LED
• Support for IteadStudio Sonoff T1 wall switches (1, 2 and 4 channels)
• Support for WiOn 50055 WiFi Wall Outlet & Tap
• Support for EXS WiFi Relay v3.1 (and other future latching relay boards) (#152)
• TLS/SSL support for MQTT (caution: eats a lot of memory, do not use with web interface) (#64)
• Add support for delayed ON/OFF switches (#123, #161, #188)
• Added ON and OFF actions for button events (previously only TOGGLE available) (#182)
• Sliders in web interface to control dimmer channels independently (also for brightness)
• Debug info about MQTT disconnect reason

Changed

• MQTT setters ending with "/set" by default
• Using DOUT flash mode on all devices (#167)
• Longer timeout for WiFi connection (better chances for Sonoff Basic to connect)
• Changed MQTT topics for light devices (COLOR, BRIGHTNESS, MIRED, KELVIN, CHANNEL) (#144)
• Changed the way light devices are defined (see LIGHT_PROVIDER_DIMMER)
• Allow to disable color picker in web interface
• API returns processed values for HLW8012 sensor (not raw values anymore) (#176)
• Major refactoring of settings

Fixed

• Discard MQTT messages with empty payload (#185)
• Wifi connection issue (https://github.com/esp8266/Arduino/issues/2186)
• Alexa connection issue

[1.8.3] 2017-07-23

Added

• Issue #85 and #90. Option to report MQTT messages with JSON payloads
• Issue #170. Updated DebouceEvent library to allow disabling double click and get faster click responses
• Using memory layout with no SPIFFS for 1Mb devices

Changed

• Rename settings s/POW/HLW8012/
• Return times in ISO8601 format

Fixed

• Issue #168. Added H801 to arduino.h file
• Issue #171. Fix corrupted will message

[1.8.2] 2017-07-16

Added

• InfluxDB support via HTTP API
• Added custom reset reason to debug log
• Enable WIFI debug on hardware reset (button long click)

Changed

• Issue #159. Allow decimals in relay pulse interval
• Updated HLW8012 library

Fixed

• Issue #148. Fix bug in conditional compilation check
• Issue #149. Using different pulse counters for each relay (thanks to Lauris Ieviņš)
• Issue #141. Limit relay pulse interval to 60s
• Fixed units for apparent & reactive power (thanks to Lauris Ieviņš)
• Fixed mDNS setup when using custom HTTP port for web interface

[1.8.1] 2017-05-22

Fixed

• Issue #140. Fix no relay control bug in Sonoff Dual

[1.8.0] 2017-05-21

Added

• Added gamma correction to RGB strips. Thanks to Chris Ward.
• Added support for Huacanxing H801 WiFi LED Controller. Thanks to Minh Phuong Ly.
• Issue #138. Added NTP configuration from web interface
• Issue #128. Report color when booting and in heartbeat stream.
• Issue #126. Show NTP status in web interface.
• Added filter limits on POW readings.
• Added color temperature to RGB calculation. Thanks to Sacha Telgenhof.
• Issue #120. Added relay flood protection. Thanks to Izik Dubnov.
• Support for "#RRGGBB", "RRR,GGG,BBB" and "WWW" color formats.
• Issue #117. Added build date & time to web interface.

Fixed

• Fix MQTT_RELAY board conifugration. Thanks to Denis French.
• Issue #125. Fix bug in relay status reading from EEPROM
• Issue #127. Fix button action in DUAL.
• Fix bug in Sonoff POW current reading. Thanks to Emmanuel Tatto.
• Minimizing my9291 flickering when booting.
• Fix conditional flags in hardware.ino to support Arduino IDE.

[1.7.1] 2017-03-28

Fixed

• Issue #113. Fix restoring color from EEPROM upon reboot
• Issue #113. Fix bug in API handlers

[1.7.0] 2017-03-27

Added

• Web interface embedded in firmware image by default
• Upload firmware image from web interface
• Added API entry point to change light color
• Added generic analog sensor. Thanks to Francesco Boscarino
• Report RSSI value in debug console and MQTT status messages
• Added support for Magic Home LED Controller
• Added support for ESPurna-H Board (based on HLW8012)
• Added forward compatible code for v2.0

Changed

• Added ellipsis (...) in debug messages longer than 80 characters
• Changed topic constants in code
• Prevent the SDK from saving WiFi configuration to flash

Fixed

• Issue #113. Fix light bulb state to OFF in library prevented the bulb from turning on
• Issue #58. Added code to handle spurious readings
• Fix bug in HLW8012 calibration current parameter casting to int instead of float
• Issue #115. Removed local declaration of _mqttForward variable. Thanks to Paweł Fiedor
• Fix MQTT will topic. Thanks to Asbjorn Tronhus

[1.6.9] 2017-03-12

Added

• Two stage read for DS18B20 devices. Thanks to Izik Dubnov.
• Option to report the relay status via MQTT periodically
• Terminal commands to change relay status an light color
• Added debug via UDP (disabled by default)
• Moved debug strings to PROGMEM. ~1.5KByes memory freed
• Avoid broadcasting websocket messages if no clients connected

Fixed

• Fixing use after free bug that leads to corrupted auth credentials. Thanks to David Guillen

[1.6.8] 2017-03-01

Added

• Issue #85. Heartbeat reports now free heap, uptime and VCC every 5 minutes

Changed

• Wait two minutes instead of one in AP mode before trying to reconnect to the router
• Issue #92. Debug log enabled by default in Arduino IDE
• Issue #91. Using AsyncMqttClient as default MQTT client again

Fixed

• Report data from all sensors via websocket even if no MQTT connection
• Issue #92. Fix unknown reference in Arduino IDE
• Split data.h contents into 1k lines, otherwise Arduino IDE chokes on them
• Discard empty MQTT topic while subscribing

[1.6.7] 2017-02-25

Added

• Support for OpenLight / AI-Light by AI-Thinker based on MY9291 LED driver
• Issue #87. Factory reset when physical button pressed for >10 seconds

[1.6.6] 2017-02-23

Fixed

• Issue #82. Fix critical bug on Sonoff Dual

[1.6.5] 2017-02-22

Added

• Option to backup and restore settings from the web interface
• Footer in the web interface

Changed

• Using PubSubClient as MQTT client by default (please read the documentation)
• Double & long clicks do nothing except for the first defined button

Fixed

• Issue #79. Fix bug in WiFi led notification & MQTT connectivity (using PubSubClient)
• Issue #73. Fix bug when building without Domoticz support
• Fix Gulp tasks dependencies

[1.6.4] 2017-02-20

Added

• Option to embed the web interface in the firmware, disabled by default
• Change relay status with a GET request (browser friendly)
• Support for PROGMEM debug messages (only wifi module has been changed)
• Option to disable mDNS, enabled by default
• Show current web server port in debug log
• Issue #75. Link relays to LEDs
• Issue #76. Using http://espurna.local when in AP mode

Changed

• Images and favicon is now embedded in the HTML
• Authentication challenge only in /auth request. All static contents are un-authenticated
• HTTP response code when out of websocket slots changed from 423 to 429

Fixed

• Memory leak in MQTT connection method
• Wait 60 seconds before retrying to connect when in AP mode
• Issue #24 & #74. Update ESPAsyncTCP and ESPAsyncWebServer to latest GIT version that supports MSS defragmenting
• Issue #73. Fixes for windows machines

Removed

• Captive portal removed, mDNS resolution for AP mode too

[1.6.3] 2017-02-15

Added

• Issue #69. Temperature unit configuration from the web interface
• Issue #55. WebServer port configurable from the web interface, defaults to 80
• Expand network configuration when adding a new network

Changed

• Merged web contents except images in a single compressed file for reliability
• Update support for Itead Motor Clockwise/Anticlockwise board
• Scan for strongest network only if more than 1 network configured

Fixed

• Issue #71. Added default values for netmask and DNS in web configuration
• Fixed Itead 1CH self-locking/inching board definition
• Fixed PlatformIO environments for ESP8285 boards (4CH and Touch)

[1.6.2] 2017-02-10

Fixed

• Check if there is an MQTT broker defined before the MQTT_MAX_TRIES check

[1.6.1] 2017-02-10

Added

• Added support for Jorge Garcia's Wifi+Relay Board Kit
• Reporting current and energy incrementals to a separate counters in Domoticz (thanks to Toni Arte)
• Force WiFi reconnect after MQTT_MAX_TRIES fails trying to connect to MQTT broker

[1.6.0] 2017-02-05

Added

• Added support for toggle switches
• Allow reset the board via an MQTT message
• Allow reset the board via an RPC (HTTP) message
• Added support for ADC121 I2C for current monitoring (Check http://tinkerman.cat/power-monitoring-sonoff-th-adc121/)
• Reporting voltage to Domoticz (only HLW8012)
• Map button events to actions (toggle relay, AP mode, reset, pulse mode)

Changed

• Reporting energy incrementals (Domoticz, MQTT)

Removed

• Removed current monitor bypass when relay is OFF
• Removed energy API entry point

[1.5.4] 2017-02-03

Fixed

• Issue #50. Fix type bug in window variable when calculating energy for HLW8012 devices (Sonoff POW)

[1.5.3] 2017-02-02

Fixed

• Issue #50 and #54. Fixed domoticz MQTT message format

Added

• Energy calculation and aggregation. API entry points and MQTT messages.

[1.5.2] 2017-01-29

Fixed

• Fix bug in emon topic payload

[1.5.1] 2017-01-28

Added

• OpenEnergyMonitor WiFi MQTT Relay / Thermostat support (thanks to Denis French)

Fixed

• NTP connection refresh upon wifi connection
• Filesystem image build using local gulp installation

[1.5.0] 2017-01-21

Added

• Pulse mode. Allows to define a pulse time after which the relay will switch back
• API entry points for sensor data (power, current, voltage, temperature and humidity)
• Export sensor data to Domoticz (power, current, voltage, temperature and humidity)
• Configurable (in code) mapping between buttons and relays
• MQTT messages for button events
• Added support for Itead Studio 1CH inching/self locking smart switch board
• Added support for Jan Goedeke Wifi Relay boards (both NC and NO versions)
• Notify OTA updates to websocket clients, automatically reload page
• Support for pulse mode notification LED and button
• Revert relay state mode on boot (thanks to Minh Phuong Ly)

Fixed

• MQTT will topic
• Crash with HLW812 interrupts while trying to create a WIFI connection
• Issue #20 Better inline documentation for Alexa and Domoticz default settings
• Issue #39 Fixed autoconnect issue with static IP (fixed in JustWifi library)
• Issue #41 Added password requirements to initial password change page

Changed

• Changed LED pattern for WIFI notifications (shorter pulses)

[1.4.4] 2017-01-13

Added

• Adding current, voltage, apparent and reactive power reports to Sonoff POW (Web & MQTT)

Fixed

• Issue #35 Fixed frequent MQTT connection drops after WIFI reconnect
• Defer wifi disconnection from web interface to allow request to return

Changed

• Move all Arduino IDE configuration values to their own file
• Using latest HLW8012 library in interrupt mode

[1.4.3] 2017-01-11

Fixed

• Issue #6 Using forked Time library to prevent conflict with Arduino Core for ESP8266 time.h file in windows machines

[1.4.2] 2017-01-09

Added

• Support for inverse logic relays

Fixed

• Issue #31. Fixed error in relay identification from MQTT messages

[1.4.1] 2017-01-05

Added

• Alexa support by default on all devices
• Added support for Wemos D1 Mini board with official Relay Shield

Fixed

• Multi-packet websocket frames

[1.4.0] 2016-12-31

Added

• Domoticz support via MQTT (https://www.domoticz.com/wiki/MQTT)
• Support for static IP connections

Fixed

• Issue #16. Enforce minimum password strength in web interface

Changed

• Using default client_id provided by AsyncMqttClient
• Allow up to 5 different WIFI networks

Removed

• File system version file

[1.3.1] 2016-12-31

Fixed

• data_dir fix for PlatformIO

[1.3.0] 2016-12-30

Changed

• Arduino IDE support (changes in the folder structure and documentation)

[1.2.0] 2016-12-27

Added

• Force password changing if it's the default one
• Added Last-Modified header to static contents
• Added DNS captive portal for AP mode
• Added support for Sonoff 4CH
• Added support for WorkChoice ecoPlug (ECOPLUG). Thanks to David Myers
• Added support for Sonoff SV
• Added support for Sonoff Touch
• Comment out hardware selection in hardware.h if using Arduino IDE
• Added support for MQTT get/set suffixes (/status, /set, ...)
• Added support for LED notifications via MQTT
• Added EEPROM check commands to terminal interface

Changed

• Using unreleased AsyncMqttClient with stability improvements
• Better decoupling between MQTT and relays/websockets
• Skipping retained MQTT messages (configurable)

Fixed

• Issue #11 Compile error when building sonoff-dual-debug
• Issue #14 MQTT Connection with Username an Password not working
• Issue #17 Moved static variable 'pending' to class variable

[1.1.0] 2016-12-06

Added

• Added support for DS18B20 temperature sensor. Thanks to Francesco Boscarino
• Added reset command from console
• Added support for multirelay boards like Sonoff DUAL or Electrodragon ESP Relay Board

Changed

• Not using espressif8266_stage in default environment
• Relay MQTT topics
• API entry points

Removed

• Old non protected API

[1.0.3] 2016-11-29

Added

• WeMo emulation through the fauxmoESP library (control your switch from Alexa!)
• REST API for relay management
• Better dependency definitions in platformio.ini
• Option to define inverse logic to on-board LED
• Built data folder included in repo

Changed

• Using non-interrupt driven mode for HLW8012
• Better documentation
• Small changes to web interface
• Same admin password for web, OTA and WIFI AP mode

Fixed

• Prevent fauxmoESP to be compiled by default

Removed

• Removed ESPurna board to its own repo

[1.0.1] 2016-11-13

Added

• Basic authentication and CSRF to websocket requests

[1.0.0] 2016-11-13

Added

• Using ESPAsyncWebServer (for web & websockets) and AsyncMqttClient

[0.9.9] 2016-11-12

Added

• Preliminary support for Sonoff POW
• Replace AJAX requests with websockets
• Using sprites for images
• Hostname can be changed
• Added initial relay state mode
• Reconnect and reset buttons on web interface

Changed

• Changed long click to reset and double click to AP mode
• Using officially supported platformio.ini file by default

Fixed

• Removed unnecessary memory inefficient code
• Temprary fix for Adafruit DHT library (see https://github.com/adafruit/DHT-sensor-library/issues/62)

[0.9.8] 2016-10-06

Added

• Using PureCMS for the web interface
• Using gulp to build the filesystem files
• Using Embedis for configuration

Changed

• Updated JustWifi library
• Web interface changes
• Using custom platformio.ini file
• Loads of changes in modules
• Added DEBUG_MSG

Fixed

• Clean gulp builder script

[0.9.7] 2016-08-28

Changed

• Moving wifi management to library (JustWifi)
• Split code into modules

[0.9.6] 2016-08-12

Added

• Added heartbeat, version and fsversion MQTT messages

Changed

• GZip 3rd party contents

[0.9.5] 2016-07-31

• Initial stable version