mhsw-espurna/code/espurna/config/general.h

//------------------------------------------------------------------------------
// Do not change this file unless you know what you are doing
// Configuration settings are in the settings.h file
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
// GENERAL
//------------------------------------------------------------------------------

#define DEVICE_NAME             MANUFACTURER "_" DEVICE     // Concatenate both to get a unique device name
#define ADMIN_PASS              "fibonacci" // Default password (WEB, OTA, WIFI)
#define USE_PASSWORD            1           // Insecurity caution! Disabling this will disable password querying completely.
#define LOOP_DELAY_TIME         10          // Delay for this millis in the main loop [0-250]

#define ARRAYINIT(type, name, ...) \
    type name[] = {__VA_ARGS__};

//------------------------------------------------------------------------------
// TELNET
//------------------------------------------------------------------------------

#ifndef TELNET_SUPPORT
#define TELNET_SUPPORT          1               // Enable telnet support by default (3.34Kb)
#endif

#ifndef TELNET_STA
#define TELNET_STA              0               // By default, disallow connections via STA interface
#endif

#define TELNET_PORT             23              // Port to listen to telnet clients
#define TELNET_MAX_CLIENTS      1               // Max number of concurrent telnet clients

//------------------------------------------------------------------------------
// DEBUG
//------------------------------------------------------------------------------

// Serial debug log

#ifndef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT    1               // Enable serial debug log
#endif

#ifndef DEBUG_PORT
#define DEBUG_PORT              Serial          // Default debugging port
#endif

#ifndef SERIAL_BAUDRATE
#define SERIAL_BAUDRATE         115200          // Default baudrate
#endif

#ifndef DEBUG_ADD_TIMESTAMP
#define DEBUG_ADD_TIMESTAMP     1               // Add timestamp to debug messages
                                                // (in millis overflowing every 1000 seconds)
#endif

// Second serial port (used for RX)

#ifndef SERIAL_RX_ENABLED
#define SERIAL_RX_ENABLED       0               // Secondary serial port for RX
#endif

#ifndef SERIAL_RX_PORT
#define SERIAL_RX_PORT          Serial			// This setting is usually defined
												// in the hardware.h file for those
												// boards that require it
#endif

#ifndef SERIAL_RX_BAUDRATE
#define SERIAL_RX_BAUDRATE      115200          // Default baudrate
#endif

//------------------------------------------------------------------------------

// UDP debug log
// To receive the message son the destination computer use nc:
// nc -ul 8113

#ifndef DEBUG_UDP_SUPPORT
#define DEBUG_UDP_SUPPORT       0               // Enable UDP debug log
#endif
#define DEBUG_UDP_IP            IPAddress(192, 168, 1, 100)
#define DEBUG_UDP_PORT          8113

//------------------------------------------------------------------------------

#ifndef DEBUG_TELNET_SUPPORT
#define DEBUG_TELNET_SUPPORT    TELNET_SUPPORT  // Enable telnet debug log if telnet is enabled too
#endif

#if DEBUG_TELNET_SUPPORT
#undef TELNET_SUPPORT
#define TELNET_SUPPORT          1
#endif

//------------------------------------------------------------------------------

#ifndef DEBUG_WEB_SUPPORT
#define DEBUG_WEB_SUPPORT       WEB_SUPPORT  // Enable web debug log if web is enabled too
#endif

#if DEBUG_WEB_SUPPORT
#undef WEB_SUPPORT
#define WEB_SUPPORT             1           // Chicken and egg :)
#endif

#define DEBUG_WEB_ENABLED       1           // Enable debug output by default

//------------------------------------------------------------------------------

// General debug options and macros
#define DEBUG_SUPPORT           DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT

#if DEBUG_SUPPORT
    #define DEBUG_MSG(...) debugSend(__VA_ARGS__)
    #define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)
#endif

#ifndef DEBUG_MSG
    #define DEBUG_MSG(...)
    #define DEBUG_MSG_P(...)
#endif

//------------------------------------------------------------------------------
// TERMINAL
//------------------------------------------------------------------------------

#ifndef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT         1              // Enable terminal commands (0.97Kb)
#endif

#define TERMINAL_BUFFER_SIZE     128            // Max size for commands commands

//------------------------------------------------------------------------------
// SYSTEM CHECK
//------------------------------------------------------------------------------

#ifndef SYSTEM_CHECK_ENABLED
#define SYSTEM_CHECK_ENABLED    1               // Enable crash check by default
#endif

#define SYSTEM_CHECK_TIME       60000           // The system is considered stable after these many millis
#define SYSTEM_CHECK_MAX        5               // After this many crashes on boot
                                                // the system is flagged as unstable

//------------------------------------------------------------------------------
// EEPROM
//------------------------------------------------------------------------------

#define EEPROM_SIZE             4096            // EEPROM size in bytes
#define EEPROM_RELAY_STATUS     0               // Address for the relay status (1 byte)
#define EEPROM_ENERGY_COUNT     1               // Address for the energy counter (4 bytes)
#define EEPROM_CUSTOM_RESET     5               // Address for the reset reason (1 byte)
#define EEPROM_CRASH_COUNTER    6               // Address for the crash counter (1 byte)
#define EEPROM_MESSAGE_ID       7               // Address for the MQTT message id (4 bytes)
#define EEPROM_DATA_END         11              // End of custom EEPROM data block

//------------------------------------------------------------------------------
// HEARTBEAT
//------------------------------------------------------------------------------

#ifndef HEARTBEAT_ENABLED
#define HEARTBEAT_ENABLED           1
#endif

#define HEARTBEAT_INTERVAL          300000      // Interval between heartbeat messages (in ms)
#define UPTIME_OVERFLOW             4294967295  // Uptime overflow value

// Topics that will be reported in heartbeat
#define HEARTBEAT_REPORT_STATUS     1
#define HEARTBEAT_REPORT_IP         1
#define HEARTBEAT_REPORT_MAC        1
#define HEARTBEAT_REPORT_RSSI       1
#define HEARTBEAT_REPORT_UPTIME     1
#define HEARTBEAT_REPORT_DATETIME   1
#define HEARTBEAT_REPORT_FREEHEAP   1
#define HEARTBEAT_REPORT_VCC        1
#define HEARTBEAT_REPORT_RELAY      1
#define HEARTBEAT_REPORT_LIGHT      1
#define HEARTBEAT_REPORT_HOSTNAME   1
#define HEARTBEAT_REPORT_APP        1
#define HEARTBEAT_REPORT_VERSION    1
#define HEARTBEAT_REPORT_INTERVAL   0

//------------------------------------------------------------------------------
// Load average
//------------------------------------------------------------------------------
#define LOADAVG_INTERVAL        30000   // Interval between calculating load average (in ms)
#define LOADAVG_REPORT          1       // Should we report Load average over MQTT?

//------------------------------------------------------------------------------
// RESET
//------------------------------------------------------------------------------

#define CUSTOM_RESET_HARDWARE   1               // Reset from hardware button
#define CUSTOM_RESET_WEB        2               // Reset from web interface
#define CUSTOM_RESET_TERMINAL   3               // Reset from terminal
#define CUSTOM_RESET_MQTT       4               // Reset via MQTT
#define CUSTOM_RESET_RPC        5               // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA        6               // Reset after successful OTA update
#define CUSTOM_RESET_HTTP       7               // Reset via HTTP GET
#define CUSTOM_RESET_NOFUSS     8               // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE    9               // Reset after update from web interface
#define CUSTOM_RESET_FACTORY    10              // Factory reset from terminal

#define CUSTOM_RESET_MAX        10

PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reboot from web interface";
PROGMEM const char custom_reset_terminal[] = "Reboot from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reboot from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reboot from RPC";
PROGMEM const char custom_reset_ota[] = "Reboot after successful OTA update";
PROGMEM const char custom_reset_http[] = "Reboot from HTTP";
PROGMEM const char custom_reset_nofuss[] = "Reboot after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reboot after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
    custom_reset_hardware, custom_reset_web, custom_reset_terminal,
    custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
    custom_reset_http, custom_reset_nofuss, custom_reset_upgrade,
    custom_reset_factory
};

//------------------------------------------------------------------------------
// BUTTON
//------------------------------------------------------------------------------

#ifndef BUTTON_DEBOUNCE_DELAY
#define BUTTON_DEBOUNCE_DELAY       50          // Debounce delay (ms)
#endif

#ifndef BUTTON_DBLCLICK_DELAY
#define BUTTON_DBLCLICK_DELAY       500         // Time in ms to wait for a second (or third...) click
#endif

#ifndef BUTTON_LNGCLICK_DELAY
#define BUTTON_LNGCLICK_DELAY       1000        // Time in ms holding the button down to get a long click
#endif

#ifndef BUTTON_LNGLNGCLICK_DELAY
#define BUTTON_LNGLNGCLICK_DELAY    10000       // Time in ms holding the button down to get a long-long click
#endif

#define BUTTON_EVENT_NONE           0
#define BUTTON_EVENT_PRESSED        1
#define BUTTON_EVENT_RELEASED       2
#define BUTTON_EVENT_CLICK          2
#define BUTTON_EVENT_DBLCLICK       3
#define BUTTON_EVENT_LNGCLICK       4
#define BUTTON_EVENT_LNGLNGCLICK    5

#define BUTTON_MODE_NONE            0
#define BUTTON_MODE_TOGGLE          1
#define BUTTON_MODE_ON              2
#define BUTTON_MODE_OFF             3
#define BUTTON_MODE_AP              4
#define BUTTON_MODE_RESET           5
#define BUTTON_MODE_PULSE           6
#define BUTTON_MODE_FACTORY         7

//------------------------------------------------------------------------------
// RELAY
//------------------------------------------------------------------------------

#define RELAY_BOOT_OFF              0
#define RELAY_BOOT_ON               1
#define RELAY_BOOT_SAME             2
#define RELAY_BOOT_TOGGLE           3

#define RELAY_TYPE_NORMAL           0
#define RELAY_TYPE_INVERSE          1
#define RELAY_TYPE_LATCHED          2
#define RELAY_TYPE_LATCHED_INVERSE  3

#define RELAY_SYNC_ANY              0
#define RELAY_SYNC_NONE_OR_ONE      1
#define RELAY_SYNC_ONE              2
#define RELAY_SYNC_SAME             3

#define RELAY_PULSE_NONE            0
#define RELAY_PULSE_OFF             1
#define RELAY_PULSE_ON              2

#define RELAY_PROVIDER_RELAY        0
#define RELAY_PROVIDER_DUAL         1
#define RELAY_PROVIDER_LIGHT        2
#define RELAY_PROVIDER_RFBRIDGE     3
#define RELAY_PROVIDER_STM          4

// Default boot mode: 0 means OFF, 1 ON and 2 whatever was before
#define RELAY_BOOT_MODE             RELAY_BOOT_OFF

// 0 means ANY, 1 zero or one and 2 one and only one
#define RELAY_SYNC                  RELAY_SYNC_ANY

// Default pulse mode: 0 means no pulses, 1 means normally off, 2 normally on
#define RELAY_PULSE_MODE            RELAY_PULSE_NONE

// Default pulse time in seconds
#define RELAY_PULSE_TIME            1.0

// Relay requests flood protection window - in seconds
#define RELAY_FLOOD_WINDOW          3

// Allowed actual relay changes inside requests flood protection window
#define RELAY_FLOOD_CHANGES         5

// Pulse with in milliseconds for a latched relay
#define RELAY_LATCHING_PULSE        10

// Do not save relay state after these many milliseconds
#define RELAY_SAVE_DELAY            1000

//------------------------------------------------------------------------------
// LED
//------------------------------------------------------------------------------

#define LED_MODE_MQTT               0       // LED will be managed from MQTT (OFF by default)
#define LED_MODE_WIFI               1       // LED will blink according to the WIFI status
#define LED_MODE_FOLLOW             2       // LED will follow state of linked relay (check RELAY#_LED)
#define LED_MODE_FOLLOW_INVERSE     3       // LED will follow the opposite state of linked relay (check RELAY#_LED)
#define LED_MODE_FINDME             4       // LED will be ON if all relays are OFF
#define LED_MODE_FINDME_WIFI        5       // A mixture between WIFI and FINDME
#define LED_MODE_ON                 6       // LED always ON
#define LED_MODE_OFF                7       // LED always OFF
#define LED_MODE_RELAY              8       // If any relay is ON, LED will be ON, otherwise OFF
#define LED_MODE_RELAY_WIFI         9       // A mixture between WIFI and RELAY, the reverse of MIXED

// -----------------------------------------------------------------------------
// WIFI
// -----------------------------------------------------------------------------

#define WIFI_CONNECT_TIMEOUT    60000       // Connecting timeout for WIFI in ms
#define WIFI_RECONNECT_INTERVAL 180000      // If could not connect to WIFI, retry after this time in ms
#define WIFI_MAX_NETWORKS       5           // Max number of WIFI connection configurations
#define WIFI_AP_MODE            AP_MODE_ALONE
#define WIFI_SLEEP_ENABLED      1           // Enable WiFi light sleep
#define WIFI_SCAN_NETWORKS      1           // Perform a network scan before connecting

// Optional hardcoded configuration (up to 2 networks)
#ifndef WIFI1_SSID
#define WIFI1_SSID              ""
#endif
#ifndef WIFI1_PASS
#define WIFI1_PASS              ""
#endif
#ifndef WIFI1_IP
#define WIFI1_IP                ""
#endif
#ifndef WIFI1_GW
#define WIFI1_GW                ""
#endif
#ifndef WIFI1_MASK
#define WIFI1_MASK              ""
#endif
#ifndef WIFI1_DNS
#define WIFI1_DNS               ""
#endif
#ifndef WIFI2_SSID
#define WIFI2_SSID              ""
#endif
#ifndef WIFI2_PASS
#define WIFI2_PASS              ""
#endif
#ifndef WIFI2_IP
#define WIFI2_IP                ""
#endif
#ifndef WIFI2_GW
#define WIFI2_GW                ""
#endif
#ifndef WIFI2_MASK
#define WIFI2_MASK              ""
#endif
#ifndef WIFI2_DNS
#define WIFI2_DNS               ""
#endif

#define WIFI_RSSI_1M            -30         // Calibrate it with your router reading the RSSI at 1m
#define WIFI_PROPAGATION_CONST  4           // This is typically something between 2.7 to 4.3 (free space is 2)

// -----------------------------------------------------------------------------
// WEB
// -----------------------------------------------------------------------------

#ifndef WEB_SUPPORT
#define WEB_SUPPORT             1           // Enable web support (http, api, 121.65Kb)
#endif

#ifndef WEB_EMBEDDED
#define WEB_EMBEDDED            1           // Build the firmware with the web interface embedded in
#endif

// This is not working at the moment!!
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0
#define WEB_SSL_ENABLED         0           // Use HTTPS web interface

#define WEB_MODE_NORMAL         0
#define WEB_MODE_PASSWORD       1

#define WEB_USERNAME            "admin"     // HTTP username
#define WEB_FORCE_PASS_CHANGE   1           // Force the user to change the password if default one
#define WEB_PORT                80          // HTTP port

// -----------------------------------------------------------------------------
// WEBSOCKETS
// -----------------------------------------------------------------------------

// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)

#define WS_AUTHENTICATION       1           // WS authentication ON by default (see #507)
#define WS_BUFFER_SIZE          5           // Max number of secured websocket connections
#define WS_TIMEOUT              1800000     // Timeout for secured websocket
#define WS_UPDATE_INTERVAL      30000       // Update clients every 30 seconds

// -----------------------------------------------------------------------------
// API
// -----------------------------------------------------------------------------

// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)

#define API_ENABLED             0           // Do not enable API by default
#define API_BUFFER_SIZE         15          // Size of the buffer for HTTP GET API responses
#define API_REAL_TIME_VALUES    0           // Show filtered/median values by default (0 => median, 1 => real time)

// -----------------------------------------------------------------------------
// UI
// -----------------------------------------------------------------------------

#define UI_TAG_INPUT            0
#define UI_TAG_CHECKBOX         1
#define UI_TAG_SELECT           2

// -----------------------------------------------------------------------------
// MDNS / LLMNR / NETBIOS / SSDP
// -----------------------------------------------------------------------------

#ifndef MDNS_SERVER_SUPPORT
#define MDNS_SERVER_SUPPORT     1           // Publish services using mDNS by default (1.48Kb)
#endif

#ifndef MDNS_CLIENT_SUPPORT
#define MDNS_CLIENT_SUPPORT     0           // Resolve mDNS names (3.44Kb)
#endif

#ifndef LLMNR_SUPPORT
#define LLMNR_SUPPORT           0           // Publish device using LLMNR protocol by default (1.95Kb) - requires 2.4.0
#endif

#ifndef NETBIOS_SUPPORT
#define NETBIOS_SUPPORT         0           // Publish device using NetBIOS protocol by default (1.26Kb) - requires 2.4.0
#endif

#ifndef SSDP_SUPPORT
#define SSDP_SUPPORT            0           // Publish device using SSDP protocol by default (4.59Kb)
                                            // Not compatible with ALEXA_SUPPORT at the moment
#endif

#ifndef SSDP_DEVICE_TYPE
#define SSDP_DEVICE_TYPE        "upnp:rootdevice"
//#define SSDP_DEVICE_TYPE        "urn:schemas-upnp-org:device:BinaryLight:1"
#endif

#if WEB_SUPPORT == 0
#undef SSDP_SUPPORT
#define SSDP_SUPPORT            0           // SSDP support requires web support
#endif

// -----------------------------------------------------------------------------
// SPIFFS
// -----------------------------------------------------------------------------

#ifndef SPIFFS_SUPPORT
#define SPIFFS_SUPPORT          0           // Do not add support for SPIFFS by default
#endif

// -----------------------------------------------------------------------------
// OTA
// -----------------------------------------------------------------------------

#define OTA_PORT                8266        // OTA port
#define OTA_GITHUB_FP           "D7:9F:07:61:10:B3:92:93:E3:49:AC:89:84:5B:03:80:C1:9E:2F:8B"

// -----------------------------------------------------------------------------
// NOFUSS
// -----------------------------------------------------------------------------

#ifndef NOFUSS_SUPPORT
#define NOFUSS_SUPPORT          0          // Do not enable support for NoFuss by default (12.65Kb)
#endif

#define NOFUSS_ENABLED          0           // Do not perform NoFUSS updates by default
#define NOFUSS_SERVER           ""          // Default NoFuss Server
#define NOFUSS_INTERVAL         3600000     // Check for updates every hour

// -----------------------------------------------------------------------------
// UART <-> MQTT
// -----------------------------------------------------------------------------

#ifndef UART_MQTT_SUPPORT
#define UART_MQTT_SUPPORT       0           // No support by default
#endif

#define UART_MQTT_USE_SOFT      0           // Use SoftwareSerial
#define UART_MQTT_HW_PORT       Serial      // Hardware serial port (if UART_MQTT_USE_SOFT == 0)
#define UART_MQTT_RX_PIN        4           // RX PIN (if UART_MQTT_USE_SOFT == 1)
#define UART_MQTT_TX_PIN        5           // TX PIN (if UART_MQTT_USE_SOFT == 1)
#define UART_MQTT_BAUDRATE      115200      // Serial speed
#define UART_MQTT_BUFFER_SIZE   100         // UART buffer size

#if UART_MQTT_SUPPORT
#define MQTT_SUPPORT            1
#undef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT        0
#undef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT    0
#endif

// -----------------------------------------------------------------------------
// MQTT
// -----------------------------------------------------------------------------

#ifndef MQTT_SUPPORT
#define MQTT_SUPPORT            1           // MQTT support (22.38Kb async, 12.48Kb sync)
#endif


#ifndef MQTT_USE_ASYNC
#define MQTT_USE_ASYNC          1           // Use AysncMQTTClient (1) or PubSubClient (0)
#endif

// MQTT OVER SSL
// Using MQTT over SSL works pretty well but generates problems with the web interface.
// It could be a good idea to use it in conjuntion with WEB_SUPPORT=0.
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
//
// You can use SSL with MQTT_USE_ASYNC=1 (AsyncMqttClient library)
// but you might experience hiccups on the web interface, so my recommendation is:
// WEB_SUPPORT=0
//
// If you use SSL with MQTT_USE_ASYNC=0 (PubSubClient library)
// you will have to disable all the modules that use ESPAsyncTCP, that is:
// ALEXA_SUPPORT=0, INFLUXDB_SUPPORT=0, TELNET_SUPPORT=0, THINGSPEAK_SUPPORT=0 and WEB_SUPPORT=0
//
// You will need the fingerprint for your MQTT server, example for CloudMQTT:
// $ echo -n | openssl s_client -connect m11.cloudmqtt.com:24055 > cloudmqtt.pem
// $ openssl x509 -noout -in cloudmqtt.pem -fingerprint -sha1

#define MQTT_SSL_ENABLED            0               // By default MQTT over SSL will not be enabled
#define MQTT_SSL_FINGERPRINT        ""              // SSL fingerprint of the server

#define MQTT_ENABLED                0               // Do not enable MQTT connection by default
#define MQTT_AUTOCONNECT            1               // If enabled and MDNS_SERVER_SUPPORT=1 will perform an autodiscover and
                                                    // autoconnect to the first MQTT broker found if none defined
#define MQTT_SERVER                 ""              // Default MQTT broker address
#define MQTT_USER                   ""              // Default MQTT broker usename
#define MQTT_PASS                   ""              // Default MQTT broker password
#define MQTT_PORT                   1883            // MQTT broker port
#define MQTT_TOPIC                  "{hostname}"    // Default MQTT base topic
#define MQTT_RETAIN                 true            // MQTT retain flag
#define MQTT_QOS                    0               // MQTT QoS value for all messages
#define MQTT_KEEPALIVE              30              // MQTT keepalive value

#define MQTT_RECONNECT_DELAY_MIN    5000            // Try to reconnect in 5 seconds upon disconnection
#define MQTT_RECONNECT_DELAY_STEP   5000            // Increase the reconnect delay in 5 seconds after each failed attempt
#define MQTT_RECONNECT_DELAY_MAX    120000          // Set reconnect time to 2 minutes at most

#define MQTT_SKIP_RETAINED          1               // Skip retained messages on connection
#define MQTT_SKIP_TIME              1000            // Skip messages for 1 second anter connection

#define MQTT_USE_JSON               0               // Group messages in a JSON body
#define MQTT_USE_JSON_DELAY         100             // Wait this many ms before grouping messages
#define MQTT_QUEUE_MAX_SIZE         20              // Size of the MQTT queue when MQTT_USE_JSON is enabled

// These are the properties that will be sent when useJson is true
#ifndef MQTT_ENQUEUE_IP
#define MQTT_ENQUEUE_IP             1
#endif
#ifndef MQTT_ENQUEUE_MAC
#define MQTT_ENQUEUE_MAC            1
#endif
#ifndef MQTT_ENQUEUE_HOSTNAME
#define MQTT_ENQUEUE_HOSTNAME       1
#endif
#ifndef MQTT_ENQUEUE_DATETIME
#define MQTT_ENQUEUE_DATETIME       1
#endif
#ifndef MQTT_ENQUEUE_MESSAGE_ID
#define MQTT_ENQUEUE_MESSAGE_ID     1
#endif

// These particles will be concatenated to the MQTT_TOPIC base to form the actual topic
#define MQTT_TOPIC_JSON         "data"
#define MQTT_TOPIC_ACTION       "action"
#define MQTT_TOPIC_RELAY        "relay"
#define MQTT_TOPIC_LED          "led"
#define MQTT_TOPIC_BUTTON       "button"
#define MQTT_TOPIC_IP           "ip"
#define MQTT_TOPIC_VERSION      "version"
#define MQTT_TOPIC_UPTIME       "uptime"
#define MQTT_TOPIC_DATETIME     "datetime"
#define MQTT_TOPIC_FREEHEAP     "freeheap"
#define MQTT_TOPIC_VCC          "vcc"
#define MQTT_TOPIC_STATUS       "status"
#define MQTT_TOPIC_MAC          "mac"
#define MQTT_TOPIC_RSSI         "rssi"
#define MQTT_TOPIC_MESSAGE_ID   "id"
#define MQTT_TOPIC_APP          "app"
#define MQTT_TOPIC_INTERVAL     "interval"
#define MQTT_TOPIC_HOSTNAME     "host"
#define MQTT_TOPIC_TIME         "time"
#define MQTT_TOPIC_RFOUT        "rfout"
#define MQTT_TOPIC_RFIN         "rfin"
#define MQTT_TOPIC_RFLEARN      "rflearn"
#define MQTT_TOPIC_RFRAW        "rfraw"
#define MQTT_TOPIC_UARTIN       "uartin"
#define MQTT_TOPIC_UARTOUT      "uartout"
#define MQTT_TOPIC_LOADAVG      "loadavg"

// Light module
#define MQTT_TOPIC_CHANNEL      "channel"
#define MQTT_TOPIC_COLOR        "color"     // DEPRECATED, use RGB instead
#define MQTT_TOPIC_COLOR_RGB    "rgb"
#define MQTT_TOPIC_COLOR_HSV    "hsv"
#define MQTT_TOPIC_ANIM_MODE    "anim_mode"
#define MQTT_TOPIC_ANIM_SPEED   "anim_speed"
#define MQTT_TOPIC_BRIGHTNESS   "brightness"
#define MQTT_TOPIC_MIRED        "mired"
#define MQTT_TOPIC_KELVIN       "kelvin"

#define MQTT_STATUS_ONLINE      "1"         // Value for the device ON message
#define MQTT_STATUS_OFFLINE     "0"         // Value for the device OFF message (will)

#define MQTT_ACTION_RESET       "reboot"    // RESET MQTT topic particle

// Internal MQTT events (do not change)
#define MQTT_CONNECT_EVENT      0
#define MQTT_DISCONNECT_EVENT   1
#define MQTT_MESSAGE_EVENT      2

#define MQTT_MESSAGE_ID_SHIFT   1000        // Store MQTT message id into EEPROM every these many

// Custom get and set postfixes
// Use something like "/status" or "/set", with leading slash
// Since 1.9.0 the default value is "" for getter and "/set" for setter
#ifndef MQTT_GETTER
#define MQTT_GETTER             ""
#endif
#ifndef MQTT_SETTER
#define MQTT_SETTER             "/set"
#endif

// -----------------------------------------------------------------------------
// BROKER
// -----------------------------------------------------------------------------

#ifndef BROKER_SUPPORT
#define BROKER_SUPPORT          1           // The broker is a poor-man's pubsub manager
#endif

// -----------------------------------------------------------------------------
// SETTINGS
// -----------------------------------------------------------------------------

#ifndef SETTINGS_AUTOSAVE
#define SETTINGS_AUTOSAVE       1           // Autosave settings o force manual commit
#endif

#define SETTINGS_MAX_LIST_COUNT 10          // Maximum index for settings lists

// -----------------------------------------------------------------------------
// LIGHT
// -----------------------------------------------------------------------------

// Available light providers (do not change)
#define LIGHT_PROVIDER_NONE     0
#define LIGHT_PROVIDER_MY92XX   1 // works with MY9291 and MY9231
#define LIGHT_PROVIDER_DIMMER   2

// LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels.
// They have to be defined for each device in the hardware.h file.
// If 3 or more channels first 3 will be considered RGB.
// Usual configurations are:
// 1 channels => W
// 2 channels => WW
// 3 channels => RGB
// 4 channels => RGBW
// 5 channels => RGBWW

#ifndef LIGHT_SAVE_ENABLED
#define LIGHT_SAVE_ENABLED      1           // Light channel values saved by default after each change
#endif

#define LIGHT_SAVE_DELAY        5           // Persist color after 5 seconds to avoid wearing out

#ifndef LIGHT_MAX_PWM

#if LIGHT_PROVIDER == LIGHT_PROVIDER_MY92XX
#define LIGHT_MAX_PWM           255
#endif

#if LIGHT_PROVIDER == LIGHT_PROVIDER_DIMMER
#define LIGHT_MAX_PWM           10000        // 5000 * 200ns => 1 kHz
#endif

#endif // LIGHT_MAX_PWM

#ifndef LIGHT_LIMIT_PWM
#define LIGHT_LIMIT_PWM         LIGHT_MAX_PWM   // Limit PWM to this value (prevent 100% power)
#endif

#ifndef LIGHT_MAX_VALUE
#define LIGHT_MAX_VALUE         255         // Maximum light value
#endif

#define LIGHT_MAX_BRIGHTNESS    255         // Maximun brightness value
#define LIGHT_STEP              32          // Step size
#define LIGHT_USE_COLOR         1           // Use 3 first channels as RGB
#define LIGHT_USE_WHITE         0           // Use white channel whenever RGB have the same value
#define LIGHT_USE_GAMMA         0           // Use gamma correction for color channels
#define LIGHT_USE_CSS           1           // Use CSS style to report colors (1=> "#FF0000", 0=> "255,0,0")
#define LIGHT_USE_RGB           0           // Use RGB color selector (1=> RGB, 0=> HSV)

#define LIGHT_USE_TRANSITIONS   1           // Transitions between colors
#define LIGHT_TRANSITION_STEP   10          // Time in millis between each transtion step
#define LIGHT_TRANSITION_STEPS  50          // Number of steps to acomplish transition

// -----------------------------------------------------------------------------
// DOMOTICZ
// -----------------------------------------------------------------------------

#ifndef DOMOTICZ_SUPPORT
#define DOMOTICZ_SUPPORT        MQTT_SUPPORT    // Build with domoticz (if MQTT) support (1.72Kb)
#endif

#if DOMOTICZ_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT            1               // If Domoticz enabled enable MQTT
#endif

#define DOMOTICZ_ENABLED        0               // Disable domoticz by default
#define DOMOTICZ_IN_TOPIC       "domoticz/in"   // Default subscription topic
#define DOMOTICZ_OUT_TOPIC      "domoticz/out"  // Default publication topic

// -----------------------------------------------------------------------------
// HOME ASSISTANT
// -----------------------------------------------------------------------------

#ifndef HOMEASSISTANT_SUPPORT
#define HOMEASSISTANT_SUPPORT   MQTT_SUPPORT    // Build with home assistant support (if MQTT, 1.64Kb)
#endif

#if HOMEASSISTANT_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT            1               // If Home Assistant enabled enable MQTT
#endif

#define HOMEASSISTANT_ENABLED   0               // Integration not enabled by default
#define HOMEASSISTANT_PREFIX    "homeassistant" // Default MQTT prefix

// -----------------------------------------------------------------------------
// INFLUXDB
// -----------------------------------------------------------------------------

#ifndef INFLUXDB_SUPPORT
#define INFLUXDB_SUPPORT        0               // Enable InfluxDB support by default (4.38Kb)
#endif

#define INFLUXDB_ENABLED        0               // InfluxDB disabled by default
#define INFLUXDB_HOST           ""              // Default server
#define INFLUXDB_PORT           8086            // Default InfluxDB port
#define INFLUXDB_DATABASE       ""              // Default database
#define INFLUXDB_USERNAME       ""              // Default username
#define INFLUXDB_PASSWORD       ""              // Default password

// -----------------------------------------------------------------------------
// THINGSPEAK
// -----------------------------------------------------------------------------

#ifndef THINGSPEAK_SUPPORT
#define THINGSPEAK_SUPPORT      1               // Enable Thingspeak support by default (2.56Kb)
#endif

#define THINGSPEAK_ENABLED      0               // Thingspeak disabled by default
#define THINGSPEAK_APIKEY       ""              // Default API KEY

#define THINGSPEAK_USE_ASYNC    1               // Use AsyncClient instead of WiFiClientSecure

// THINGSPEAK OVER SSL
// Using THINGSPEAK over SSL works well but generates problems with the web interface,
// so you should compile it with WEB_SUPPORT to 0.
// When THINGSPEAK_USE_ASYNC is 1, requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
#define THINGSPEAK_USE_SSL      0               // Use secure connection
#define THINGSPEAK_FINGERPRINT  "78 60 18 44 81 35 BF DF 77 84 D4 0A 22 0D 9B 4E 6C DC 57 2C"

#define THINGSPEAK_HOST         "api.thingspeak.com"
#if THINGSPEAK_USE_SSL
#define THINGSPEAK_PORT         443
#else
#define THINGSPEAK_PORT         80
#endif
#define THINGSPEAK_URL          "/update"
#define THINGSPEAK_MIN_INTERVAL 15000           // Minimum interval between POSTs (in millis)

#ifndef ASYNC_TCP_SSL_ENABLED
#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC
#undef THINGSPEAK_SUPPORT                       // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED
#endif
#endif

// -----------------------------------------------------------------------------
// SCHEDULER
// -----------------------------------------------------------------------------

#define SCHEDULER_TYPE_SWITCH       1
#define SCHEDULER_TYPE_DIM          2

#ifndef SCHEDULER_SUPPORT
#define SCHEDULER_SUPPORT           1           // Enable scheduler (1.77Kb)
#endif

#if SCHEDULER_SUPPORT
#undef NTP_SUPPORT
#define NTP_SUPPORT                 1           // Scheduler needs NTP
#endif

#define SCHEDULER_MAX_SCHEDULES     10          // Max schedules alowed

// -----------------------------------------------------------------------------
// NTP
// -----------------------------------------------------------------------------

#ifndef NTP_SUPPORT
#define NTP_SUPPORT             1               // Build with NTP support by default (6.78Kb)
#endif

#define NTP_SERVER              "pool.ntp.org"  // Default NTP server
#define NTP_TIME_OFFSET         1               // Default timezone offset (GMT+1)
#define NTP_DAY_LIGHT           true            // Enable daylight time saving by default
#define NTP_SYNC_INTERVAL       60              // NTP initial check every minute
#define NTP_UPDATE_INTERVAL     1800            // NTP check every 30 minutes
#define NTP_START_DELAY         1000            // Delay NTP start 1 second

// -----------------------------------------------------------------------------
// ALEXA
// -----------------------------------------------------------------------------

// This setting defines whether Alexa support should be built into the firmware
#ifndef ALEXA_SUPPORT
#define ALEXA_SUPPORT           1               // Enable Alexa support by default (10.84Kb)
#endif

// This is default value for the alexaEnabled setting that defines whether
// this device should be discoberable and respond to Alexa commands.
// Both ALEXA_SUPPORT and alexaEnabled should be 1 for Alexa support to work.
#define ALEXA_ENABLED           1

// -----------------------------------------------------------------------------
// RFBRIDGE
// This module is not compatible with RF_SUPPORT=1
// -----------------------------------------------------------------------------

#define RF_SEND_TIMES           4               // How many times to send the message
#define RF_SEND_DELAY           500             // Interval between sendings in ms
#define RF_RECEIVE_DELAY        500             // Interval between recieving in ms (avoid debouncing)

#define RF_RAW_SUPPORT          0               // RF raw codes require a specific firmware for the EFM8BB1
                                                // https://github.com/rhx/RF-Bridge-EFM8BB1

// -----------------------------------------------------------------------------
// IR
// -----------------------------------------------------------------------------

#ifndef IR_SUPPORT
#define IR_SUPPORT              0               // Do not build with IR support by default (10.25Kb)
#endif

#ifndef IR_PIN
#define IR_PIN                  4               // IR LED
#endif

// 24 Buttons Set of the IR Remote
#ifndef IR_BUTTON_SET
#define IR_BUTTON_SET           1               // IR button set to use (see below)
#endif

// IR Button modes
#define IR_BUTTON_MODE_NONE         0
#define IR_BUTTON_MODE_RGB          1
#define IR_BUTTON_MODE_HSV          2
#define IR_BUTTON_MODE_BRIGHTER     3
#define IR_BUTTON_MODE_STATE        4
#define IR_BUTTON_MODE_EFFECT       5

#define LIGHT_EFFECT_SOLID          0
#define LIGHT_EFFECT_FLASH          1
#define LIGHT_EFFECT_STROBE         2
#define LIGHT_EFFECT_FADE           3
#define LIGHT_EFFECT_SMOOTH         4

//Remote Buttons SET 1 (for the original Remote shipped with the controller)
#if IR_SUPPORT
#if IR_BUTTON_SET == 1

/*
   +------+------+------+------+
   |  UP  | Down | OFF  |  ON  |
   +------+------+------+------+
   |  R   |  G   |  B   |  W   |
   +------+------+------+------+
   |  1   |  2   |  3   |FLASH |
   +------+------+------+------+
   |  4   |  5   |  6   |STROBE|
   +------+------+------+------+
   |  7   |  8   |  9   | FADE |
   +------+------+------+------+
   |  10  |  11  |  12  |SMOOTH|
   +------+------+------+------+
*/

    #define IR_BUTTON_COUNT 24

    const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {

        { 0xFF906F, IR_BUTTON_MODE_BRIGHTER, 1 },
        { 0xFFB847, IR_BUTTON_MODE_BRIGHTER, 0 },
        { 0xFFF807, IR_BUTTON_MODE_STATE, 0 },
        { 0xFFB04F, IR_BUTTON_MODE_STATE, 1 },

        { 0xFF9867, IR_BUTTON_MODE_RGB, 0xFF0000 },
        { 0xFFD827, IR_BUTTON_MODE_RGB, 0x00FF00 },
        { 0xFF8877, IR_BUTTON_MODE_RGB, 0x0000FF },
        { 0xFFA857, IR_BUTTON_MODE_RGB, 0xFFFFFF },

        { 0xFFE817, IR_BUTTON_MODE_RGB, 0xD13A01 },
        { 0xFF48B7, IR_BUTTON_MODE_RGB, 0x00E644 },
        { 0xFF6897, IR_BUTTON_MODE_RGB, 0x0040A7 },
        { 0xFFB24D, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },

        { 0xFF02FD, IR_BUTTON_MODE_RGB, 0xE96F2A },
        { 0xFF32CD, IR_BUTTON_MODE_RGB, 0x00BEBF },
        { 0xFF20DF, IR_BUTTON_MODE_RGB, 0x56406F },
        { 0xFF00FF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },

        { 0xFF50AF, IR_BUTTON_MODE_RGB, 0xEE9819 },
        { 0xFF7887, IR_BUTTON_MODE_RGB, 0x00799A },
        { 0xFF708F, IR_BUTTON_MODE_RGB, 0x944E80 },
        { 0xFF58A7, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },

        { 0xFF38C7, IR_BUTTON_MODE_RGB, 0xFFFF00 },
        { 0xFF28D7, IR_BUTTON_MODE_RGB, 0x0060A1 },
        { 0xFFF00F, IR_BUTTON_MODE_RGB, 0xEF45AD },
        { 0xFF30CF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }

    };

#endif

//Remote Buttons SET 2 (another identical IR Remote shipped with another controller)
#if IR_BUTTON_SET == 2

/*
   +------+------+------+------+
   |  UP  | Down | OFF  |  ON  |
   +------+------+------+------+
   |  R   |  G   |  B   |  W   |
   +------+------+------+------+
   |  1   |  2   |  3   |FLASH |
   +------+------+------+------+
   |  4   |  5   |  6   |STROBE|
   +------+------+------+------+
   |  7   |  8   |  9   | FADE |
   +------+------+------+------+
   |  10  |  11  |  12  |SMOOTH|
   +------+------+------+------+
*/

    #define IR_BUTTON_COUNT 24

    const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {

        { 0xFF00FF, IR_BUTTON_MODE_BRIGHTER, 1 },
        { 0xFF807F, IR_BUTTON_MODE_BRIGHTER, 0 },
        { 0xFF40BF, IR_BUTTON_MODE_STATE, 0 },
        { 0xFFC03F, IR_BUTTON_MODE_STATE, 1 },

        { 0xFF20DF, IR_BUTTON_MODE_RGB, 0xFF0000 },
        { 0xFFA05F, IR_BUTTON_MODE_RGB, 0x00FF00 },
        { 0xFF609F, IR_BUTTON_MODE_RGB, 0x0000FF },
        { 0xFFE01F, IR_BUTTON_MODE_RGB, 0xFFFFFF },

        { 0xFF10EF, IR_BUTTON_MODE_RGB, 0xD13A01 },
        { 0xFF906F, IR_BUTTON_MODE_RGB, 0x00E644 },
        { 0xFF50AF, IR_BUTTON_MODE_RGB, 0x0040A7 },
        { 0xFFD02F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },

        { 0xFF30CF, IR_BUTTON_MODE_RGB, 0xE96F2A },
        { 0xFFB04F, IR_BUTTON_MODE_RGB, 0x00BEBF },
        { 0xFF708F, IR_BUTTON_MODE_RGB, 0x56406F },
        { 0xFFF00F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },

        { 0xFF08F7, IR_BUTTON_MODE_RGB, 0xEE9819 },
        { 0xFF8877, IR_BUTTON_MODE_RGB, 0x00799A },
        { 0xFF48B7, IR_BUTTON_MODE_RGB, 0x944E80 },
        { 0xFFC837, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },

        { 0xFF28D7, IR_BUTTON_MODE_RGB, 0xFFFF00 },
        { 0xFFA857, IR_BUTTON_MODE_RGB, 0x0060A1 },
        { 0xFF6897, IR_BUTTON_MODE_RGB, 0xEF45AD },
        { 0xFFE817, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }

    };

#endif

#endif // IR_SUPPORT

//--------------------------------------------------------------------------------
// Custom RF module
// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/
// Enable support by passing RF_SUPPORT=1 build flag
// This module is not compatible with RFBRIDGE
//--------------------------------------------------------------------------------

#ifndef RF_SUPPORT
#define RF_SUPPORT                  0
#endif

#ifndef RF_PIN
#define RF_PIN                      14
#endif

#define RF_DEBOUNCE                 500
#define RF_LEARN_TIMEOUT            60000