mhsw-espurna/code/espurna/config/custom.h.example

// ------------------------------------------------------------------------------
// Example file for custom.h
// Either copy and paste this file then rename removing the .example or create your
// own file: 'custom.h'
// This file allows users to create their own configurations.
// See 'code/espurna/config/general.h' for default settings.
//
// See: https://github.com/xoseperez/espurna/wiki/Software-features#enabling-features
// and 'code/platformio_override.ini.example' for more details.
// ------------------------------------------------------------------------------


// Example of a Sonoff Basic board with some options disabled to reduce firmware size.

#if defined(MY_SONOFF_BUILD01)    // This section will be used when src_build_flags contains
                                  //  -DMY_SONOFF_BUILD01 in 'platformio_override.ini'

    #define MANUFACTURER               "ITEAD"
    #define DEVICE                     "SONOFF_BASIC_BUILD01"

    // Disable these
    #define DEBUG_SERIAL_SUPPORT       0
    #define ALEXA_SUPPORT              0
    #define DOMOTICZ_SUPPORT           0
    #define HOMEASSISTANT_SUPPORT      0
    #define THINGSPEAK_SUPPORT         0

    // Buttons
    #define BUTTON1_PIN         	0
    #define BUTTON1_CONFIG      	BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
    #define BUTTON1_RELAY       	1

    // Relays
    #define RELAY1_PIN          	12
    #define RELAY1_TYPE         	RELAY_TYPE_NORMAL

    // LEDs
    #define LED1_PIN            	13
    #define LED1_PIN_INVERSE    	1


// Example of the Sonoff Basic board above but with two buttons on different GPIOs.
// The two buttons both toggle the one RELAY but ALL button events send MQTT values.
// An MQTT based system can then carry out differnt functions depending on
// the 'DOUBLE CLICK, LONG CLICK OR LONG-LONG CLICK' trigger. A BMX280 environment
// sensor is also connected using I2C on GPIO 1 and 3.

#elif defined(MY_SONOFF_BUILD02)    // This section will be used when src_build_flags contains
                                    //  -DMY_SONOFF_BUILD02 in 'platformio_override.ini

    // Info - Custom Basic with BMX280 I2C on GPIO 1 and 3
    #define MANUFACTURER            "ITEAD"
    #define DEVICE                  "SONOFF_BASIC_BMX280"    // You can use your own name here

    // Disable these
    #define DEBUG_SERIAL_SUPPORT    0
    #define ALEXA_SUPPORT           0
    #define DOMOTICZ_SUPPORT        0
    #define HOMEASSISTANT_SUPPORT   0
    #define THINGSPEAK_SUPPORT      0


    // Buttons
    #define BUTTON_MQTT_SEND_ALL_EVENTS		1
    #define BUTTON1_PIN         	0    // Built in button.
    #define BUTTON1_CONFIG      	BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
    #define BUTTON1_RELAY       	1
    #define BUTTON1_PRESS       	BUTTON_MODE_NONE
    #define BUTTON1_CLICK       	BUTTON_MODE_TOGGLE
    #define BUTTON1_DBLCLICK    	BUTTON_MODE_NONE
    #define BUTTON1_LNGCLICK    	BUTTON_MODE_OFF
    #define BUTTON1_LNGLNGCLICK 	BUTTON_MODE_NONE
    #define BUTTON2_PIN         	2    // External push button connected between IO2 and GND.
    #define BUTTON2_CONFIG      	BUTTON_PUSHBUTTON | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH
    #define BUTTON2_RELAY       	1
    #define BUTTON2_PRESS       	BUTTON_MODE_NONE
    #define BUTTON2_CLICK       	BUTTON_MODE_TOGGLE
    #define BUTTON2_DBLCLICK    	BUTTON_MODE_NONE
    #define BUTTON2_LNGCLICK    	BUTTON_MODE_NONE
    #define BUTTON2_LNGLNGCLICK 	BUTTON_MODE_NONE

    // Relays
    #define RELAY1_PIN          	12
    #define RELAY1_TYPE         	RELAY_TYPE_NORMAL

    // LEDs
    #define LED1_PIN            	13
    #define LED1_PIN_INVERSE    	1

    // Extras
    #define BMX280_SUPPORT 		1
    #define BMX280_ADDRESS 		0x76
    #define I2C_SDA_PIN 		1  //TX PIN    **DISABLE DEBUG_SERIAL_SUPPORT**
    #define I2C_SCL_PIN 		3  //RX PIN    **DISABLE DEBUG_SERIAL_SUPPORT**

#endif