|
|
- /*
-
- HARDWARE MODULE
-
- Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
-
- */
-
- /*
-
- The goal of this file is to store board configuration values in EEPROM so
- the migration to future version 2 will be straigh forward.
-
- */
-
- void hwUpwardsCompatibility() {
-
- unsigned int board = getSetting("board", 0).toInt();
- if (board > 0) return;
-
- #ifdef NODEMCUV2
- setSetting("board", 2);
- setSetting("ledGPIO", 1, 2);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef D1_RELAYSHIELD
- setSetting("board", 3);
- setSetting("ledGPIO", 1, 2);
- setSetting("ledLogic", 1, 1);
- setSetting("relayGPIO", 1, 5);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef SONOFF
- setSetting("board", 4);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef SONOFF_TH
- setSetting("board", 5);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef SONOFF_SV
- setSetting("board", 6);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef SONOFF_TOUCH
- setSetting("board", 7);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef SONOFF_POW
- setSetting("board", 8);
- setSetting("ledGPIO", 1, 15);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef SONOFF_DUAL
- setSetting("board", 9);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnRelay", 3, 1);
- setSetting("relayProvider", RELAY_PROVIDER_DUAL);
- #endif
-
- #ifdef ITEAD_1CH_INCHING
- setSetting("board", 10);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef SONOFF_4CH
- setSetting("board", 11);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnGPIO", 2, 9);
- setSetting("btnGPIO", 3, 10);
- setSetting("btnGPIO", 4, 14);
- setSetting("btnRelay", 1, 2);
- setSetting("btnRelay", 2, 3);
- setSetting("btnRelay", 3, 4);
- setSetting("btnRelay", 4, 0);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayGPIO", 2, 5);
- setSetting("relayGPIO", 3, 4);
- setSetting("relayGPIO", 4, 15);
- setSetting("relayLogic", 1, 0);
- setSetting("relayLogic", 2, 0);
- setSetting("relayLogic", 3, 0);
- setSetting("relayLogic", 4, 0);
- #endif
-
- #ifdef SLAMPHER
- setSetting("board", 12);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef S20
- setSetting("board", 13);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef ESP_RELAY_BOARD
- setSetting("board", 14);
- setSetting("ledGPIO", 1, 16);
- setSetting("ledLogic", 1, 0);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnGPIO", 2, 2);
- setSetting("btnRelay", 1, 1);
- setSetting("btnRelay", 2, 2);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayGPIO", 2, 13);
- setSetting("relayLogic", 1, 0);
- setSetting("relayLogic", 2, 0);
- #endif
-
- #ifdef ECOPLUG
- setSetting("board", 15);
- setSetting("ledGPIO", 1, 2);
- setSetting("ledLogic", 1, 0);
- setSetting("btnGPIO", 1, 13);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 15);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef WIFI_RELAY_NC
- setSetting("board", 16);
- setSetting("btnGPIO", 1, 12);
- setSetting("btnGPIO", 2, 13);
- setSetting("btnRelay", 1, 1);
- setSetting("btnRelay", 2, 2);
- setSetting("relayGPIO", 1, 2);
- setSetting("relayGPIO", 2, 14);
- setSetting("relayLogic", 1, 1);
- setSetting("relayLogic", 2, 1);
- #endif
-
- #ifdef WIFI_RELAY_NO
- setSetting("board", 17);
- setSetting("btnGPIO", 1, 12);
- setSetting("btnGPIO", 2, 13);
- setSetting("btnRelay", 1, 1);
- setSetting("btnRelay", 2, 2);
- setSetting("relayGPIO", 1, 2);
- setSetting("relayGPIO", 2, 14);
- setSetting("relayLogic", 1, 0);
- setSetting("relayLogic", 2, 0);
- #endif
-
- #ifdef MQTT_RELAY
- setSetting("board", 18);
- setSetting("ledGPIO", 1, 16);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef WIFI_RELAYS_BOARD_KIT
- setSetting("board", 19);
- setSetting("relayGPIO", 1, 0);
- setSetting("relayLogic", 1, 1);
- setSetting("relayGPIO", 2, 2);
- setSetting("relayLogic", 2, 1);
- #endif
-
- #ifdef AI_LIGHT
- setSetting("board", 20);
- setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
- setSetting("lightProvider", LIGHT_PROVIDER_MY9192);
- setSetting("myDIGPIO", 13);
- setSetting("myDCKIGPIO", 15);
- #endif
-
- #ifdef LED_CONTROLLER
- setSetting("board", 21);
- setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
- setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
- setSetting("ledGPIO", 1, 2);
- setSetting("ledLogic", 1, 1);
- setSetting("ch1GPIO", 14);
- setSetting("ch2GPIO", 5);
- setSetting("ch3GPIO", 12);
- setSetting("ch4GPIO", 13);
- setSetting("ch1Logic", 0);
- setSetting("ch2Logic", 0);
- setSetting("ch3Logic", 0);
- setSetting("ch4Logic", 0);
- #endif
-
- #ifdef ITEAD_MOTOR
- setSetting("board", 22);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 0);
- #endif
-
- #ifdef ESPURNA_H
- setSetting("board", 23);
- setSetting("ledGPIO", 1, 5);
- setSetting("ledLogic", 1, 0);
- setSetting("btnGPIO", 1, 4);
- setSetting("btnRelay", 1, 1);
- setSetting("relayGPIO", 1, 12);
- setSetting("relayLogic", 1, 1);
- #endif
-
- #ifdef H801_LED_CONTROLLER
- setSetting("board", 24);
- setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
- setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
- setSetting("ledGPIO", 5, 1);
- setSetting("ledLogic", 1, 1);
- setSetting("ch1GPIO", 15);
- setSetting("ch2GPIO", 13);
- setSetting("ch3GPIO", 12);
- setSetting("ch4GPIO", 14);
- setSetting("ch5GPIO", 4);
- setSetting("ch1Logic", 0);
- setSetting("ch2Logic", 0);
- setSetting("ch3Logic", 0);
- setSetting("ch4Logic", 0);
- setSetting("ch5Logic", 0);
- #endif
-
- #ifdef ITEAD_BNSZ01
- setSetting("board", 25);
- setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
- setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
- setSetting("ledGPIO", 13, 1);
- setSetting("ledLogic", 1, 1);
- setSetting("ch1GPIO", 12);
- setSetting("ch1Logic", 0);
- #endif
-
- #ifdef SONOFF_RFBRIDGE
- setSetting("board", 26);
- setSetting("ledGPIO", 1, 13);
- setSetting("ledLogic", 1, 1);
- setSetting("btnGPIO", 1, 0);
- setSetting("relayProvider", RELAY_PROVIDER_RFBRIDGE);
- #endif
-
- saveSettings();
-
- }
|
