|
|
- # Firmware
-
- ## Build the firmware
-
- The project is ready to be build using [PlatformIO][1].
- Please refer to their web page for instructions on how to install the builder.
-
- If you are using PlatformIO /strongly recommended) it will take care of the library dependencies. Otherwise you will have to install them manually:
-
- * Benoit Blanchon's [ArduinoJson](https://github.com/bblanchon/ArduinoJson)
- * Hristo Gochkov's [ESPAsyncTCP](https://github.com/me-no-dev/ESPAsyncTCP)
- * Hristo Gochkov's [ESPAsyncUDP](https://github.com/me-no-dev/ESPAsyncUDP)
- * Hristo Gochkov's [ESPAsyncWebServer](https://github.com/me-no-dev/ESPAsyncWebServer)
- * Marvin Roger's [AyncMqttClient](https://github.com/marvinroger/async-mqtt-client)
- * Adafruit's [DHT Sensor Library](https://github.com/adafruit/DHT-sensor-library) (required if compiling with DHT support: -DENABLE_DHT)
- * Adafruit's [Unified Sensor Library](https://github.com/adafruit/Adafruit_Sensor) (required if compiling with DHT support: -DENABLE_DHT)
- * The PatternAgents (et al.) [Embedis](https://github.com/thingSoC/embedis)
- * German Martin's [NtpCLientLib](https://github.com/gmag11/NtpClient)
- * Michael Maregolis & Paul Stoffregen's [Time](https://github.com/PaulStoffregen/Time)
- * Randy Simons' [RemoteSwitch](https://github.com/jccprj/RemoteSwitch-arduino-library) (required if using custom RF module: -DENABLE_RF)
-
- And my own libraries:
-
- * [JustWifi](https://bitbucket.org/xoseperez/justwifi.git)
- * [FauxmoESP](https://bitbucket.org/xoseperez/fauxmoesp.git) (required if compiling with WeMo emulation support: -DENABLE_FAUXMO)
- * [HLW8012](https://bitbucket.org/xoseperez/hlw8012.git) (required if compiling for Sonoff POW: -DENABLE_POW)
- * [EmonLiteESP](https://bitbucket.org/xoseperez/emonliteesp.git) (required if compiling with Energy Monitoring support: -DENABLE_EMON)
- * [NoFUSS](https://bitbucket.org/xoseperez/nofuss.git) (required if compiling with NoFUSS Automatic OTA support: -DENABLE_NOFUSS)
-
- Once you have all the code, you can check if it's working by:
-
- ```bash
- > pio run -e node-debug
- ```
-
- If it compiles you are ready to flash the firmware.
-
- ## Flash your board
-
- Wire your board (check the [Hardware page](Hardware.md)) and flash the firmware (with ```upload```):
-
- ```bash
- > pio run -t upload -e sonoff
- ```
-
- (or any other environment, depending on the board you are woring with).
-
- Library dependencies are automatically managed via PlatformIO Library Manager or included via submodules and linked from the "lib" folder.
-
- Once the firmware is uploaded next step is to upload the web interface. Check how to [build and flash the filesystem](Filesystem.md).
-
- [1]: http://www.platformio.org
|
