|
|
- # ESPurna change log
-
- The format is based on [Keep a Changelog](http://keepachangelog.com/)
- and this project adheres to [Semantic Versioning](http://semver.org/).
-
- ## [1.9.1] 2017-08-27
- ### Added
- - Support to build without NTP support
- - Added current time, uptime, free heap, firmware size and free space to web interface
-
- ### Changed
- - Changed settings keys for Itead Sonoff RF Bridge
- - Disable Domoticz by default
-
- ### Fixed
- - Fixed build flags for DHT and DS18B20 in platformio.ini file
- - Fixed Itead Sonoff B1 by updating the my9291 library
- - Fixed light status on boot (#157)
- - Fixed CSS bug cause by a bad merge
-
- ## [1.9.0] 2017-08-25
- ### Added
- - Support for IteadStudio BN-SZ01 Ceiling Light (#132)
- - Support for IteadStudio Sonoff RF Bridge (#173)
- - Support for IteadStudio Sonoff 4CH Pro (#174)
- - Support for IteadStudio Sonoff B1
- - Support for IteadStudio Sonoff LED
- - Support for IteadStudio Sonoff T1 wall switches (1, 2 and 4 channels)
- - Support for WiOn 50055 WiFi Wall Outlet & Tap
- - Support for EXS WiFi Relay v3.1 (and other future latching relay boards) (#152)
- - TLS/SSL support for MQTT (caution: eats a lot of memory, do not use with web interface) (#64)
- - Add support for delayed ON/OFF switches (#123, #161, #188)
- - Added ON and OFF actions for button events (previously only TOGGLE available) (#182)
- - Sliders in web interface to control dimmer channels independently (also for brightness)
- - Debug info about MQTT disconnect reason
-
- ### Changed
- - MQTT setters ending with "/set" by default
- - Using DOUT flash mode on all devices (#167)
- - Longer timeout for WiFi connection (better chances for Sonoff Basic to connect)
- - Changed MQTT topics for light devices (COLOR, BRIGHTNESS, MIRED, KELVIN, CHANNEL) (#144)
- - Changed the way light devices are defined (see LIGHT_PROVIDER_DIMMER)
- - Allow to disable color picker in web interface
- - API returns processed values for HLW8012 sensor (not raw values anymore) (#176)
- - Major refactoring of settings
-
- ### Fixed
- - Discard MQTT messages with empty payload (#185)
- - Wifi connection issue (https://github.com/esp8266/Arduino/issues/2186)
- - Alexa connection issue
-
- ## [1.8.3] 2017-07-23
- ### Added
- - Issue #85 and #90. Option to report MQTT messages with JSON payloads
- - Issue #170. Updated DebouceEvent library to allow disabling double click and get faster click responses
- - Using memory layout with no SPIFFS for 1Mb devices
-
- ### Changed
- - Rename settings s/POW/HLW8012/
- - Return times in ISO8601 format
-
- ### Fixed
- - Issue #168. Added H801 to arduino.h file
- - Issue #171. Fix corrupted will message
-
- ## [1.8.2] 2017-07-16
- ### Added
- - InfluxDB support via HTTP API
- - Added custom reset reason to debug log
- - Enable WIFI debug on hardware reset (button long click)
-
- ### Changed
- - Issue #159. Allow decimals in relay pulse interval
- - Updated HLW8012 library
-
- ### Fixed
- - Issue #148. Fix bug in conditional compilation check
- - Issue #149. Using different pulse counters for each relay (thanks to Lauris Ieviņš)
- - Issue #141. Limit relay pulse interval to 60s
- - Fixed units for apparent & reactive power (thanks to Lauris Ieviņš)
- - Fixed mDNS setup when using custom HTTP port for web interface
-
- ## [1.8.1] 2017-05-22
- ### Fixed
- - Issue #140. Fix no relay control bug in Sonoff Dual
-
- ## [1.8.0] 2017-05-21
- ### Added
- - Added gamma correction to RGB strips. Thanks to Chris Ward.
- - Added support for Huacanxing H801 WiFi LED Controller. Thanks to Minh Phuong Ly.
- - Issue #138. Added NTP configuration from web interface
- - Issue #128. Report color when booting and in heartbeat stream.
- - Issue #126. Show NTP status in web interface.
- - Added filter limits on POW readings.
- - Added color temperature to RGB calculation. Thanks to Sacha Telgenhof.
- - Issue #120. Added relay flood protection. Thanks to Izik Dubnov.
- - Support for "#RRGGBB", "RRR,GGG,BBB" and "WWW" color formats.
- - Issue #117. Added build date & time to web interface.
-
- ### Fixed
- - Fix MQTT_RELAY board conifugration. Thanks to Denis French.
- - Issue #125. Fix bug in relay status reading from EEPROM
- - Issue #127. Fix button action in DUAL.
- - Fix bug in Sonoff POW current reading. Thanks to Emmanuel Tatto.
- - Minimizing my9291 flickering when booting.
- - Fix conditional flags in hardware.ino to support Arduino IDE.
-
- ## [1.7.1] 2017-03-28
- ### Fixed
- - Issue #113. Fix restoring color from EEPROM upon reboot
- - Issue #113. Fix bug in API handlers
-
- ## [1.7.0] 2017-03-27
- ### Added
- - Web interface embedded in firmware image by default
- - Upload firmware image from web interface
- - Added API entry point to change light color
- - Added generic analog sensor. Thanks to Francesco Boscarino
- - Report RSSI value in debug console and MQTT status messages
- - Added support for Magic Home LED Controller
- - Added support for ESPurna-H Board (based on HLW8012)
- - Added forward compatible code for v2.0
-
- ### Changed
- - Added ellipsis (...) in debug messages longer than 80 characters
- - Changed topic constants in code
- - Prevent the SDK from saving WiFi configuration to flash
-
- ### Fixed
- - Issue #113. Fix light bulb state to OFF in library prevented the bulb from turning on
- - Issue #58. Added code to handle spurious readings
- - Fix bug in HLW8012 calibration current parameter casting to int instead of float
- - Issue #115. Removed local declaration of _mqttForward variable. Thanks to Paweł Fiedor
- - Fix MQTT will topic. Thanks to Asbjorn Tronhus
-
- ## [1.6.9] 2017-03-12
- ### Added
- - Two stage read for DS18B20 devices. Thanks to Izik Dubnov.
- - Option to report the relay status via MQTT periodically
- - Terminal commands to change relay status an light color
- - Added debug via UDP (disabled by default)
- - Moved debug strings to PROGMEM. ~1.5KByes memory freed
- - Avoid broadcasting websocket messages if no clients connected
-
- ### Fixed
- - Fixing use after free bug that leads to corrupted auth credentials. Thanks to David Guillen
-
- ## [1.6.8] 2017-03-01
- ### Added
- - Issue #85. Heartbeat reports now free heap, uptime and VCC every 5 minutes
-
- ### Changed
- - Wait two minutes instead of one in AP mode before trying to reconnect to the router
- - Issue #92. Debug log enabled by default in Arduino IDE
- - Issue #91. Using AsyncMqttClient as default MQTT client again
-
- ### Fixed
- - Report data from all sensors via websocket even if no MQTT connection
- - Issue #92. Fix unknown reference in Arduino IDE
- - Split data.h contents into 1k lines, otherwise Arduino IDE chokes on them
- - Discard empty MQTT topic while subscribing
-
- ## [1.6.7] 2017-02-25
- ### Added
- - Support for OpenLight / AI-Light by AI-Thinker based on MY9291 LED driver
- - Issue #87. Factory reset when physical button pressed for >10 seconds
-
- ## [1.6.6] 2017-02-23
- ### Fixed
- - Issue #82. Fix critical bug on Sonoff Dual
-
- ## [1.6.5] 2017-02-22
- ### Added
- - Option to backup and restore settings from the web interface
- - Footer in the web interface
-
- ### Changed
- - Using PubSubClient as MQTT client by default (please read the documentation)
- - Double & long clicks do nothing except for the first defined button
-
- ### Fixed
- - Issue #79. Fix bug in WiFi led notification & MQTT connectivity (using PubSubClient)
- - Issue #73. Fix bug when building without Domoticz support
- - Fix Gulp tasks dependencies
-
- ## [1.6.4] 2017-02-20
- ### Added
- - Option to embed the web interface in the firmware, disabled by default
- - Change relay status with a GET request (browser friendly)
- - Support for PROGMEM debug messages (only wifi module has been changed)
- - Option to disable mDNS, enabled by default
- - Show current web server port in debug log
- - Issue #75. Link relays to LEDs
- - Issue #76. Using http://espurna.local when in AP mode
-
- ### Changed
- - Images and favicon is now embedded in the HTML
- - Authentication challenge only in /auth request. All static contents are un-authenticated
- - HTTP response code when out of websocket slots changed from 423 to 429
-
- ### Fixed
- - Memory leak in MQTT connection method
- - Wait 60 seconds before retrying to connect when in AP mode
- - Issue #24 & #74. Update ESPAsyncTCP and ESPAsyncWebServer to latest GIT version that supports MSS defragmenting
- - Issue #73. Fixes for windows machines
-
- ### Removed
- - Captive portal removed, mDNS resolution for AP mode too
-
- ## [1.6.3] 2017-02-15
- ### Added
- - Issue #69. Temperature unit configuration from the web interface
- - Issue #55. WebServer port configurable from the web interface, defaults to 80
- - Expand network configuration when adding a new network
-
- ### Changed
- - Merged web contents except images in a single compressed file for reliability
- - Update support for Itead Motor Clockwise/Anticlockwise board
- - Scan for strongest network only if more than 1 network configured
-
- ### Fixed
- - Issue #71. Added default values for netmask and DNS in web configuration
- - Fixed Itead 1CH self-locking/inching board definition
- - Fixed PlatformIO environments for ESP8285 boards (4CH and Touch)
-
- ## [1.6.2] 2017-02-10
- ### Fixed
- - Check if there is an MQTT broker defined before the MQTT_MAX_TRIES check
-
- ## [1.6.1] 2017-02-10
- ### Added
- - Added support for [Jorge Garcia's Wifi+Relay Board Kit](https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit/)
- - Reporting current and energy incrementals to a separate counters in Domoticz (thanks to Toni Arte)
- - Force WiFi reconnect after MQTT_MAX_TRIES fails trying to connect to MQTT broker
-
- ## [1.6.0] 2017-02-05
- ### Added
- - Added support for toggle switches
- - Allow reset the board via an MQTT message
- - Allow reset the board via an RPC (HTTP) message
- - Added support for ADC121 I2C for current monitoring (Check [http://tinkerman.cat/power-monitoring-sonoff-th-adc121/](http://tinkerman.cat/power-monitoring-sonoff-th-adc121/))
- - Reporting voltage to Domoticz (only HLW8012)
- - Map button events to actions (toggle relay, AP mode, reset, pulse mode)
-
- ### Changed
- - Reporting energy incrementals (Domoticz, MQTT)
-
- ### Removed
- - Removed current monitor bypass when relay is OFF
- - Removed energy API entry point
-
- ## [1.5.4] 2017-02-03
- ### Fixed
- - Issue #50. Fix type bug in window variable when calculating energy for HLW8012 devices (Sonoff POW)
-
- ## [1.5.3] 2017-02-02
- ### Fixed
- - Issue #50 and #54. Fixed domoticz MQTT message format
-
- ### Added
- - Energy calculation and aggregation. API entry points and MQTT messages.
-
- ## [1.5.2] 2017-01-29
- ### Fixed
- - Fix bug in emon topic payload
-
- ## [1.5.1] 2017-01-28
- ### Added
- - OpenEnergyMonitor WiFi MQTT Relay / Thermostat support (thanks to Denis French)
-
- ### Fixed
- - NTP connection refresh upon wifi connection
- - Filesystem image build using local gulp installation
-
- ## [1.5.0] 2017-01-21
- ### Added
- - Pulse mode. Allows to define a pulse time after which the relay will switch back
- - API entry points for sensor data (power, current, voltage, temperature and humidity)
- - Export sensor data to Domoticz (power, current, voltage, temperature and humidity)
- - Configurable (in code) mapping between buttons and relays
- - MQTT messages for button events
- - Added support for Itead Studio 1CH inching/self locking smart switch board
- - Added support for Jan Goedeke Wifi Relay boards (both NC and NO versions)
- - Notify OTA updates to websocket clients, automatically reload page
- - Support for pulse mode notification LED and button
- - Revert relay state mode on boot (thanks to Minh Phuong Ly)
-
- ### Fixed
- - MQTT will topic
- - Crash with HLW812 interrupts while trying to create a WIFI connection
- - Issue #20 Better inline documentation for Alexa and Domoticz default settings
- - Issue #39 Fixed autoconnect issue with static IP (fixed in JustWifi library)
- - Issue #41 Added password requirements to initial password change page
-
- ### Changed
- - Changed LED pattern for WIFI notifications (shorter pulses)
-
- ## [1.4.4] 2017-01-13
- ### Added
- - Adding current, voltage, apparent and reactive power reports to Sonoff POW (Web & MQTT)
-
- ### Fixed
- - Issue #35 Fixed frequent MQTT connection drops after WIFI reconnect
- - Defer wifi disconnection from web interface to allow request to return
-
- ### Changed
- - Move all Arduino IDE configuration values to their own file
- - Using latest HLW8012 library in interrupt mode
-
- ## [1.4.3] 2017-01-11
- ### Fixed
- - Issue #6 Using forked Time library to prevent conflict with Arduino Core for ESP8266 time.h file in windows machines
-
- ## [1.4.2] 2017-01-09
- ### Added
- - Support for inverse logic relays
-
- ### Fixed
- - Issue #31. Fixed error in relay identification from MQTT messages
-
- ## [1.4.1] 2017-01-05
- ### Added
- - Alexa support by default on all devices
- - Added support for Wemos D1 Mini board with official Relay Shield
-
- ### Fixed
- - Multi-packet websocket frames
-
- ## [1.4.0] 2016-12-31
- ### Added
- - Domoticz support via MQTT (https://www.domoticz.com/wiki/MQTT)
- - Support for static IP connections
-
- ### Fixed
- - Issue #16. Enforce minimum password strength in web interface
-
- ### Changed
- - Using default client_id provided by AsyncMqttClient
- - Allow up to 5 different WIFI networks
-
- ### Removed
- - File system version file
-
- ## [1.3.1] 2016-12-31
- ### Fixed
- - data_dir fix for PlatformIO
-
- ## [1.3.0] 2016-12-30
- ### Changed
- - Arduino IDE support (changes in the folder structure and documentation)
-
- ## [1.2.0] 2016-12-27
- ### Added
- - Force password changing if it's the default one
- - Added Last-Modified header to static contents
- - Added DNS captive portal for AP mode
- - Added support for Sonoff 4CH
- - Added support for WorkChoice ecoPlug (ECOPLUG). Thanks to David Myers
- - Added support for Sonoff SV
- - Added support for Sonoff Touch
- - Comment out hardware selection in hardware.h if using Arduino IDE
- - Added support for MQTT get/set suffixes (/status, /set, ...)
- - Added support for LED notifications via MQTT
- - Added EEPROM check commands to terminal interface
-
- ### Changed
- - Using unreleased AsyncMqttClient with stability improvements
- - Better decoupling between MQTT and relays/websockets
- - Skipping retained MQTT messages (configurable)
-
- ### Fixed
- - Issue #11 Compile error when building sonoff-dual-debug
- - Issue #14 MQTT Connection with Username an Password not working
- - Issue #17 Moved static variable 'pending' to class variable
-
- ## [1.1.0] 2016-12-06
- ### Added
- - Added support for DS18B20 temperature sensor. Thanks to Francesco Boscarino
- - Added reset command from console
- - Added support for multirelay boards like Sonoff DUAL or Electrodragon ESP Relay Board
-
- ### Changed
- - Not using espressif8266_stage in default environment
- - Relay MQTT topics
- - API entry points
-
- ### Removed
- - Old non protected API
-
- ## [1.0.3] 2016-11-29
-
- ### Added
- - WeMo emulation through the fauxmoESP library (control your switch from Alexa!)
- - REST API for relay management
- - Better dependency definitions in platformio.ini
- - Option to define inverse logic to on-board LED
- - Built data folder included in repo
-
- ### Changed
- - Using non-interrupt driven mode for HLW8012
- - Better documentation
- - Small changes to web interface
- - Same admin password for web, OTA and WIFI AP mode
-
- ### Fixed
- - Prevent fauxmoESP to be compiled by default
-
- ### Removed
- - Removed ESPurna board to its own repo
-
- ## [1.0.1] 2016-11-13
-
- ### Added
- - Basic authentication and CSRF to websocket requests
-
- ## [1.0.0] 2016-11-13
-
- ### Added
- - Using ESPAsyncWebServer (for web & websockets) and AsyncMqttClient
-
- ## [0.9.9] 2016-11-12
-
- ### Added
- - Preliminary support for Sonoff POW
- - Replace AJAX requests with websockets
- - Using sprites for images
- - Hostname can be changed
- - Added initial relay state mode
- - Reconnect and reset buttons on web interface
-
- ### Changed
- - Changed long click to reset and double click to AP mode
- - Using officially supported platformio.ini file by default
-
- ### Fixed
- - Removed unnecessary memory inefficient code
- - Temprary fix for Adafruit DHT library (see https://github.com/adafruit/DHT-sensor-library/issues/62)
-
- ## [0.9.8] 2016-10-06
-
- ### Added
- - Using PureCMS for the web interface
- - Using gulp to build the filesystem files
- - Using Embedis for configuration
-
- ### Changed
- - Updated JustWifi library
- - Web interface changes
- - Using custom platformio.ini file
- - Loads of changes in modules
- - Added DEBUG_MSG
-
- ### Fixed
- - Clean gulp builder script
-
- ## [0.9.7] 2016-08-28
-
- ### Changed
- - Moving wifi management to library (JustWifi)
- - Split code into modules
-
- ## [0.9.6] 2016-08-12
-
- ### Added
- - Added heartbeat, version and fsversion MQTT messages
-
- ### Changed
- - GZip 3rd party contents
-
- ## [0.9.5] 2016-07-31
- - Initial stable version
|