- /*
-
- SYSTEM MODULE
-
- Copyright (C) 2019 by Xose Pérez <xose dot perez at gmail dot com>
-
- */
-
- #include <Ticker.h>
- #include <EEPROM_Rotate.h>
-
- // -----------------------------------------------------------------------------
-
- bool _system_send_heartbeat = false;
- unsigned char _heartbeat_mode = HEARTBEAT_MODE;
- unsigned long _heartbeat_interval = HEARTBEAT_INTERVAL;
-
- // Calculated load average 0 to 100;
- unsigned short int _load_average = 100;
-
- // -----------------------------------------------------------------------------
-
- union system_rtcmem_t {
- struct {
- uint8_t stability_counter;
- uint8_t reset_reason;
- uint16_t _reserved_;
- } parts;
- uint32_t value;
- };
-
- uint8_t systemStabilityCounter() {
- system_rtcmem_t data;
- data.value = Rtcmem->sys;
- return data.parts.stability_counter;
- }
-
- void systemStabilityCounter(uint8_t counter) {
- system_rtcmem_t data;
- data.value = Rtcmem->sys;
- data.parts.stability_counter = counter;
- Rtcmem->sys = data.value;
- }
-
- uint8_t _systemResetReason() {
- system_rtcmem_t data;
- data.value = Rtcmem->sys;
- return data.parts.reset_reason;
- }
-
- void _systemResetReason(uint8_t reason) {
- system_rtcmem_t data;
- data.value = Rtcmem->sys;
- data.parts.reset_reason = reason;
- Rtcmem->sys = data.value;
- }
-
- #if SYSTEM_CHECK_ENABLED
-
- // Call this method on boot with start=true to increase the crash counter
- // Call it again once the system is stable to decrease the counter
- // If the counter reaches SYSTEM_CHECK_MAX then the system is flagged as unstable
- // setting _systemOK = false;
- //
- // An unstable system will only have serial access, WiFi in AP mode and OTA
-
- bool _systemStable = true;
-
- void systemCheck(bool stable) {
- uint8_t value = 0;
-
- if (stable) {
- value = 0;
- DEBUG_MSG_P(PSTR("[MAIN] System OK\n"));
- } else {
- if (!rtcmemStatus()) {
- systemStabilityCounter(1);
- return;
- }
-
- value = systemStabilityCounter();
-
- if (++value > SYSTEM_CHECK_MAX) {
- _systemStable = false;
- value = 0;
- DEBUG_MSG_P(PSTR("[MAIN] System UNSTABLE\n"));
- }
- }
-
- systemStabilityCounter(value);
- }
-
- bool systemCheck() {
- return _systemStable;
- }
-
- void systemCheckLoop() {
- static bool checked = false;
- if (!checked && (millis() > SYSTEM_CHECK_TIME)) {
- // Flag system as stable
- systemCheck(true);
- checked = true;
- }
- }
-
- #endif
-
- // -----------------------------------------------------------------------------
- // Reset
- // -----------------------------------------------------------------------------
- Ticker _defer_reset;
- uint8_t _reset_reason = 0;
-
- // system_get_rst_info() result is cached by the Core init for internal use
- uint32_t systemResetReason() {
- return resetInfo.reason;
- }
-
- void customResetReason(unsigned char reason) {
- _reset_reason = reason;
- _systemResetReason(reason);
- }
-
- unsigned char customResetReason() {
- static unsigned char status = 255;
- if (status == 255) {
- if (rtcmemStatus()) status = _systemResetReason();
- if (status > 0) customResetReason(0);
- if (status > CUSTOM_RESET_MAX) status = 0;
- }
- return status;
- }
-
- void reset() {
- ESP.restart();
- }
-
- void deferredReset(unsigned long delay, unsigned char reason) {
- _defer_reset.once_ms(delay, customResetReason, reason);
- }
-
- bool checkNeedsReset() {
- return _reset_reason > 0;
- }
-
- // -----------------------------------------------------------------------------
-
- void systemSendHeartbeat() {
- _system_send_heartbeat = true;
- }
-
- bool systemGetHeartbeat() {
- return _system_send_heartbeat;
- }
-
- unsigned long systemLoadAverage() {
- return _load_average;
- }
-
- void _systemSetupHeartbeat() {
- _heartbeat_mode = getSetting("hbMode", HEARTBEAT_MODE).toInt();
- _heartbeat_interval = getSetting("hbInterval", HEARTBEAT_INTERVAL).toInt();
- }
-
- #if WEB_SUPPORT
- bool _systemWebSocketOnReceive(const char * key, JsonVariant& value) {
- if (strncmp(key, "sys", 3) == 0) return true;
- if (strncmp(key, "hb", 2) == 0) return true;
- return false;
- }
- #endif
-
- void systemLoop() {
-
- // -------------------------------------------------------------------------
- // User requested reset
- // -------------------------------------------------------------------------
-
- if (checkNeedsReset()) {
- reset();
- }
-
- // -------------------------------------------------------------------------
- // Check system stability
- // -------------------------------------------------------------------------
-
- #if SYSTEM_CHECK_ENABLED
- systemCheckLoop();
- #endif
-
- // -------------------------------------------------------------------------
- // Heartbeat
- // -------------------------------------------------------------------------
-
- if (_system_send_heartbeat && _heartbeat_mode == HEARTBEAT_ONCE) {
- heartbeat();
- _system_send_heartbeat = false;
- } else if (_heartbeat_mode == HEARTBEAT_REPEAT || _heartbeat_mode == HEARTBEAT_REPEAT_STATUS) {
- static unsigned long last_hbeat = 0;
- #if NTP_SUPPORT
- if ((_system_send_heartbeat && ntpSynced()) || (millis() - last_hbeat > _heartbeat_interval * 1000)) {
- #else
- if (_system_send_heartbeat || (millis() - last_hbeat > _heartbeat_interval * 1000)) {
- #endif
- last_hbeat = millis();
- heartbeat();
- _system_send_heartbeat = false;
- }
- }
-
- // -------------------------------------------------------------------------
- // Load Average calculation
- // -------------------------------------------------------------------------
-
- static unsigned long last_loadcheck = 0;
- static unsigned long load_counter_temp = 0;
- load_counter_temp++;
-
- if (millis() - last_loadcheck > LOADAVG_INTERVAL) {
-
- static unsigned long load_counter = 0;
- static unsigned long load_counter_max = 1;
-
- load_counter = load_counter_temp;
- load_counter_temp = 0;
- if (load_counter > load_counter_max) {
- load_counter_max = load_counter;
- }
- _load_average = 100 - (100 * load_counter / load_counter_max);
- last_loadcheck = millis();
-
- }
-
- }
-
- void _systemSetupSpecificHardware() {
-
- //The ESPLive has an ADC MUX which needs to be configured.
- #if defined(MANCAVEMADE_ESPLIVE)
- pinMode(16, OUTPUT);
- digitalWrite(16, HIGH); //Defualt CT input (pin B, solder jumper B)
- #endif
-
- // These devices use the hardware UART
- // to communicate to secondary microcontrollers
- #if (RF_SUPPORT && !RFB_DIRECT) || (RELAY_PROVIDER == RELAY_PROVIDER_DUAL) || (RELAY_PROVIDER == RELAY_PROVIDER_STM)
- Serial.begin(SERIAL_BAUDRATE);
- #endif
-
- }
-
- void systemSetup() {
-
- #if SPIFFS_SUPPORT
- SPIFFS.begin();
- #endif
-
- // Question system stability
- #if SYSTEM_CHECK_ENABLED
- systemCheck(false);
- #endif
-
- #if WEB_SUPPORT
- wsOnReceiveRegister(_systemWebSocketOnReceive);
- #endif
-
- // Init device-specific hardware
- _systemSetupSpecificHardware();
-
- // Register Loop
- espurnaRegisterLoop(systemLoop);
-
- // Cache Heartbeat values
- _systemSetupHeartbeat();
-
- }
|