|
|
- // ------------------------------------------------------------------------------
- // Example file for custom.h
- // Either copy and paste this file then rename removing the .example or create your
- // own file: 'custom.h'
- // This file allows users to create their own configurations.
- // See 'code/espurna/config/general.h' for default settings.
- //
- // See: https://github.com/xoseperez/espurna/wiki/Software-features#enabling-features
- // and 'code/platformio_override.ini.example' for more details.
- // ------------------------------------------------------------------------------
-
-
- // Example of a Sonoff Basic board with some options disabled to reduce firmware size.
-
- #if defined(MY_SONOFF_BUILD01) // This section will be used when src_build_flags contains
- // -DMY_SONOFF_BUILD01 in 'platformio_override.ini'
-
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_BASIC_BUILD01"
-
- // Disable these
- #define DEBUG_SERIAL_SUPPORT 0
- #define ALEXA_SUPPORT 0
- #define DOMOTICZ_SUPPORT 0
- #define HOMEASSISTANT_SUPPORT 0
- #define THINGSPEAK_SUPPORT 0
-
- // Buttons
- #define BUTTON1_PIN 0
- #define BUTTON1_CONFIG BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
-
- // Example of the Sonoff Basic board above but with two buttons on different GPIOs.
- // The two buttons both toggle the one RELAY but ALL button events send MQTT values.
- // An MQTT based system can then carry out differnt functions depending on
- // the 'DOUBLE CLICK, LONG CLICK OR LONG-LONG CLICK' trigger. A BMX280 environment
- // sensor is also connected using I2C on GPIO 1 and 3.
-
- #elif defined(MY_SONOFF_BUILD02) // This section will be used when src_build_flags contains
- // -DMY_SONOFF_BUILD02 in 'platformio_override.ini
-
- // Info - Custom Basic with BMX280 I2C on GPIO 1 and 3
- #define MANUFACTURER "ITEAD"
- #define DEVICE "SONOFF_BASIC_BMX280" // You can use your own name here
-
- // Disable these
- #define DEBUG_SERIAL_SUPPORT 0
- #define ALEXA_SUPPORT 0
- #define DOMOTICZ_SUPPORT 0
- #define HOMEASSISTANT_SUPPORT 0
- #define THINGSPEAK_SUPPORT 0
-
-
- // Buttons
- #define BUTTON_MQTT_SEND_ALL_EVENTS 1
- #define BUTTON1_PIN 0 // Built in button.
- #define BUTTON1_CONFIG BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY 1
- #define BUTTON1_PRESS BUTTON_MODE_NONE
- #define BUTTON1_CLICK BUTTON_MODE_TOGGLE
- #define BUTTON1_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK BUTTON_MODE_OFF
- #define BUTTON1_LNGLNGCLICK BUTTON_MODE_NONE
- #define BUTTON2_PIN 2 // External push button connected between IO2 and GND.
- #define BUTTON2_CONFIG BUTTON_PUSHBUTTON | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH
- #define BUTTON2_RELAY 1
- #define BUTTON2_PRESS BUTTON_MODE_NONE
- #define BUTTON2_CLICK BUTTON_MODE_TOGGLE
- #define BUTTON2_DBLCLICK BUTTON_MODE_NONE
- #define BUTTON2_LNGCLICK BUTTON_MODE_NONE
- #define BUTTON2_LNGLNGCLICK BUTTON_MODE_NONE
-
- // Relays
- #define RELAY1_PIN 12
- #define RELAY1_TYPE RELAY_TYPE_NORMAL
-
- // LEDs
- #define LED1_PIN 13
- #define LED1_PIN_INVERSE 1
-
- // Extras
- #define BMX280_SUPPORT 1
- #define BMX280_ADDRESS 0x76
- #define I2C_SDA_PIN 1 //TX PIN **DISABLE DEBUG_SERIAL_SUPPORT**
- #define I2C_SCL_PIN 3 //RX PIN **DISABLE DEBUG_SERIAL_SUPPORT**
-
- #endif
|