Browse Source

Merge branch 'dev' into rfbridge

fastled
Xose Pérez 7 years ago
parent
commit
0217d8c4da
4 changed files with 117 additions and 109 deletions
  1. +102
    -94
      code/espurna/config/general.h
  2. +13
    -13
      code/espurna/espurna.ino
  3. +1
    -1
      code/espurna/mqtt.ino
  4. +1
    -1
      code/espurna/relay.ino

+ 102
- 94
code/espurna/config/general.h View File

@ -1,19 +1,22 @@
//------------------------------------------------------------------------------
// Do not change this file unless you know what you are doing
// Configuration settings are in the settings.h file
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
// GENERAL
//------------------------------------------------------------------------------
#define SERIAL_BAUDRATE 115200
#define HOSTNAME DEVICE
#define BUFFER_SIZE 1024
#define HEARTBEAT_INTERVAL 300000
#define UPTIME_OVERFLOW 4294967295
#define SERIAL_BAUDRATE 115200 // Debugging console boud rate
#define HOSTNAME DEVICE // Hostname
#define UPTIME_OVERFLOW 4294967295 // Uptime overflow value
//--------------------------------------------------------------------------------
// DEBUG
//--------------------------------------------------------------------------------
#ifndef DEBUG_PORT
#define DEBUG_PORT Serial
#define DEBUG_PORT Serial // Default debugging port
#endif
// Uncomment and configure these lines to enable remote debug via udpDebug
@ -27,24 +30,45 @@
// EEPROM
//--------------------------------------------------------------------------------
#define EEPROM_RELAY_STATUS 0
#define EEPROM_ENERGY_COUNT 1
#define EEPROM_CUSTOM_RESET 5
#define EEPROM_DATA_END 6
#define EEPROM_RELAY_STATUS 0 // Address for the relay status (1 byte)
#define EEPROM_ENERGY_COUNT 1 // Address for the energy counter (4 bytes)
#define EEPROM_CUSTOM_RESET 5 // Address for the reset reason (1 byte)
#define EEPROM_DATA_END 6 // End of custom EEPROM data block
//--------------------------------------------------------------------------------
// HEARTBEAT
//--------------------------------------------------------------------------------
#define HEARTBEAT_INTERVAL 300000 // Interval between heartbeat messages (in ms)
// Topics that will be reported in heartbeat
#define HEARTBEAT_REPORT_STATUS 1
#define HEARTBEAT_REPORT_IP 1
#define HEARTBEAT_REPORT_MAC 1
#define HEARTBEAT_REPORT_RSSI 1
#define HEARTBEAT_REPORT_UPTIME 1
#define HEARTBEAT_REPORT_FREEHEAP 1
#define HEARTBEAT_REPORT_VCC 1
#define HEARTBEAT_REPORT_RELAY 1
#define HEARTBEAT_REPORT_COLOR 1
#define HEARTBEAT_REPORT_HOSTNAME 1
#define HEARTBEAT_REPORT_APP 1
#define HEARTBEAT_REPORT_VERSION 1
#define HEARTBEAT_REPORT_INTERVAL 0
//--------------------------------------------------------------------------------
// RESET
//--------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1
#define CUSTOM_RESET_WEB 2
#define CUSTOM_RESET_TERMINAL 3
#define CUSTOM_RESET_MQTT 4
#define CUSTOM_RESET_RPC 5
#define CUSTOM_RESET_OTA 6
#define CUSTOM_RESET_NOFUSS 8
#define CUSTOM_RESET_UPGRADE 9
#define CUSTOM_RESET_FACTORY 10
#define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button
#define CUSTOM_RESET_WEB 2 // Reset from web interface
#define CUSTOM_RESET_TERMINAL 3 // Reset from terminal
#define CUSTOM_RESET_MQTT 4 // Reset via MQTT
#define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA 6 // Reset after successful OTA update
#define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface
#define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal
#define CUSTOM_RESET_MAX 10
@ -69,10 +93,10 @@ PROGMEM const char* const custom_reset_string[] = {
// BUTTON
//--------------------------------------------------------------------------------
#define BUTTON_DEBOUNCE_DELAY 50
#define BUTTON_DBLCLICK_DELAY 500
#define BUTTON_LNGCLICK_DELAY 1000
#define BUTTON_LNGLNGCLICK_DELAY 10000
#define BUTTON_DEBOUNCE_DELAY 50 // Debounce delay (ms)
#define BUTTON_DBLCLICK_DELAY 500 // Time in ms to wait for a second (or third...) click
#define BUTTON_LNGCLICK_DELAY 1000 // Time in ms holding the button down to get a long click
#define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
@ -88,8 +112,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define BUTTON_MODE_PULSE 4
#define BUTTON_MODE_FACTORY 5
#define BUTTON_DEFAULT_MODE BUTTON_MODE_TOGGLE
//--------------------------------------------------------------------------------
// RELAY
//--------------------------------------------------------------------------------
@ -137,7 +159,7 @@ PROGMEM const char* const custom_reset_string[] = {
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
#define TMP_UNITS TMP_CELSIUS
#define TMP_UNITS TMP_CELSIUS // Temperature units (TMP_CELSIUS | TMP_FAHRENHEIT)
//--------------------------------------------------------------------------------
// LED
@ -152,17 +174,17 @@ PROGMEM const char* const custom_reset_string[] = {
// WIFI & WEB
// -----------------------------------------------------------------------------
#define WIFI_RECONNECT_INTERVAL 120000
#define WIFI_CONNECT_TIMEOUT 30000
#define WIFI_MAX_NETWORKS 5
#define ADMIN_PASS "fibonacci"
#define FORCE_CHANGE_PASS 1
#define HTTP_USERNAME "admin"
#define WS_BUFFER_SIZE 5
#define WS_TIMEOUT 1800000
#define WEBSERVER_PORT 80
#define DNS_PORT 53
#define ENABLE_MDNS 1
#define WIFI_CONNECT_TIMEOUT 30000 // Connecting timeout for WIFI in ms
#define WIFI_RECONNECT_INTERVAL 120000 // If could not connect to WIFI, retry after this time in ms
#define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations
#define HTTP_USERNAME "admin" // HTTP username
#define ADMIN_PASS "fibonacci" // Default password
#define FORCE_CHANGE_PASS 1 // Force the user to change the password if default one
#define WS_BUFFER_SIZE 5 // Max number of secured websocket connections
#define WS_TIMEOUT 1800000 // Timeout for secured websocket
#define WEBSERVER_PORT 80 // HTTP port
#define DNS_PORT 53 // MDNS port
#define ENABLE_MDNS 1 // Enabled MDNS
#define WEB_MODE_NORMAL 0
#define WEB_MODE_PASSWORD 1
@ -170,9 +192,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define AP_MODE AP_MODE_ALONE
// This option builds the firmware with the web interface embedded.
// You first have to build the data.h file that holds the contents
// of the web interface by running "gulp buildfs_embed"
#ifndef EMBEDDED_WEB
#define EMBEDDED_WEB 1
#endif
@ -181,32 +200,34 @@ PROGMEM const char* const custom_reset_string[] = {
// OTA & NOFUSS
// -----------------------------------------------------------------------------
#define OTA_PORT 8266
#define NOFUSS_SERVER ""
#define NOFUSS_INTERVAL 3600000
#define OTA_PORT 8266 // OTA port
#define NOFUSS_SERVER "" // Default NoFuss Server
#define NOFUSS_INTERVAL 3600000 // Check for updates every hour
// -----------------------------------------------------------------------------
// MQTT
// -----------------------------------------------------------------------------
#ifndef MQTT_USE_ASYNC
#define MQTT_USE_ASYNC 1
#define MQTT_USE_ASYNC 1 // Use AysncMQTTClient (1) or PubSubClient (0)
#endif
#define MQTT_SERVER ""
#define MQTT_PORT 1883
#define MQTT_TOPIC "/test/switch/{identifier}"
#define MQTT_RETAIN true
#define MQTT_QOS 0
#define MQTT_KEEPALIVE 30
#define MQTT_RECONNECT_DELAY 10000
#define MQTT_TRY_INTERVAL 30000
#define MQTT_MAX_TRIES 12
#define MQTT_SKIP_RETAINED 1
#define MQTT_SKIP_TIME 1000
#define MQTT_USE_JSON 0
#define MQTT_SERVER "" // Default MQTT broker address
#define MQTT_PORT 1883 // MQTT broker port
#define MQTT_TOPIC "/test/switch/{identifier}" // Default MQTT base topic
#define MQTT_RETAIN true // MQTT retain flag
#define MQTT_QOS 0 // MQTT QoS value for all messages
#define MQTT_KEEPALIVE 30 // MQTT keepalive value
#define MQTT_RECONNECT_DELAY 10000 // Try to reconnect after 10s
#define MQTT_TRY_INTERVAL 30000 // Timeframe for disconnect retries
#define MQTT_MAX_TRIES 12 // After these many retries during the previous MQTT_TRY_INTERVAL the board will reset
#define MQTT_SKIP_RETAINED 1 // Skip retained messages on connection
#define MQTT_SKIP_TIME 1000 // Skip messages for 1 second anter connection
#define MQTT_USE_JSON 0 // Group messages in a JSON body
#define MQTT_USE_JSON_DELAY 100 // Wait this many ms before grouping messages
// These particles will be concatenated to the MQTT_TOPIC base to form the actual topic
#define MQTT_TOPIC_JSON "data"
#define MQTT_TOPIC_ACTION "action"
#define MQTT_TOPIC_RELAY "relay"
@ -230,44 +251,30 @@ PROGMEM const char* const custom_reset_string[] = {
#define MQTT_TOPIC_RFIN "rfin"
#define MQTT_TOPIC_RFLEARN "rflearn"
// Periodic reports
#define MQTT_REPORT_STATUS 1
#define MQTT_REPORT_IP 1
#define MQTT_REPORT_MAC 1
#define MQTT_REPORT_RSSI 1
#define MQTT_REPORT_UPTIME 1
#define MQTT_REPORT_FREEHEAP 1
#define MQTT_REPORT_VCC 1
#define MQTT_REPORT_RELAY 1
#define MQTT_REPORT_COLOR 1
#define MQTT_REPORT_HOSTNAME 1
#define MQTT_REPORT_APP 1
#define MQTT_REPORT_VERSION 1
#define MQTT_REPORT_INTERVAL 0
#define MQTT_STATUS_ONLINE "1"
#define MQTT_STATUS_OFFLINE "0"
#define MQTT_ACTION_RESET "reset"
#define MQTT_STATUS_ONLINE "1" // Value for the device ON message
#define MQTT_STATUS_OFFLINE "0" // Value for the device OFF message (will)
#define MQTT_ACTION_RESET "reset" // RESET MQTT topic particle
// Internal MQTT events (do not change)
#define MQTT_CONNECT_EVENT 0
#define MQTT_DISCONNECT_EVENT 1
#define MQTT_MESSAGE_EVENT 2
// Custom get and set postfixes6+
// Custom get and set postfixes
// Use something like "/status" or "/set", with leading slash
#define MQTT_USE_GETTER ""
#define MQTT_USE_SETTER ""
#define MQTT_USE_SETTER "/set"
// -----------------------------------------------------------------------------
// I2C
// -----------------------------------------------------------------------------
#define ENABLE_I2C 0
#define I2C_SDA_PIN 4
#define I2C_SCL_PIN 14
#define I2C_CLOCK_STRETCH_TIME 200
#define I2C_SCL_FREQUENCY 1000
#define ENABLE_I2C 0 // I2C enabled
#define I2C_SDA_PIN 4 // SDA GPIO
#define I2C_SCL_PIN 14 // SCL GPIO
#define I2C_CLOCK_STRETCH_TIME 200 // BRZO clock stretch time
#define I2C_SCL_FREQUENCY 1000 // BRZO SCL frequency
// -----------------------------------------------------------------------------
// LIGHT
@ -286,6 +293,7 @@ PROGMEM const char* const custom_reset_string[] = {
#define LIGHT_SAVE_DELAY 5
#define LIGHT_MAX_VALUE 255
// Settings for MY9291 bulbs (AI Light)
#define MY9291_DI_PIN 13
#define MY9291_DCKI_PIN 15
#define MY9291_COMMAND MY9291_COMMAND_DEFAULT
@ -302,28 +310,28 @@ PROGMEM const char* const custom_reset_string[] = {
// -----------------------------------------------------------------------------
#ifndef ENABLE_DOMOTICZ
#define ENABLE_DOMOTICZ 1
#define ENABLE_DOMOTICZ 1 // Enable Domoticz support by default
#endif
#define DOMOTICZ_IN_TOPIC "domoticz/in"
#define DOMOTICZ_OUT_TOPIC "domoticz/out"
#define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic
// -----------------------------------------------------------------------------
// INFLUXDB
// -----------------------------------------------------------------------------
#ifndef ENABLE_INFLUXDB
#define ENABLE_INFLUXDB 1
#define ENABLE_INFLUXDB 1 // Enable InfluxDB support by default
#endif
#define INFLUXDB_PORT 8086
#define INFLUXDB_PORT 8086 // Default InfluxDB port
// -----------------------------------------------------------------------------
// NTP
// -----------------------------------------------------------------------------
#define NTP_SERVER "pool.ntp.org"
#define NTP_TIME_OFFSET 1
#define NTP_DAY_LIGHT true
#define NTP_UPDATE_INTERVAL 1800
#define NTP_SERVER "pool.ntp.org" // Default NTP server
#define NTP_TIME_OFFSET 1 // Default timezone offset (GMT+1)
#define NTP_DAY_LIGHT true // Enable daylight time saving by default
#define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes
// -----------------------------------------------------------------------------
// FAUXMO
@ -331,7 +339,7 @@ PROGMEM const char* const custom_reset_string[] = {
// This setting defines whether Alexa support should be built into the firmware
#ifndef ENABLE_FAUXMO
#define ENABLE_FAUXMO 1
#define ENABLE_FAUXMO 1
#endif
// This is default value for the fauxmoEnabled setting that defines whether


+ 13
- 13
code/espurna/espurna.ino View File

@ -52,53 +52,53 @@ void heartbeat() {
}
#if (MQTT_REPORT_INTERVAL)
#if (HEARTBEAT_REPORT_INTERVAL)
mqttSend(MQTT_TOPIC_INTERVAL, HEARTBEAT_INTERVAL / 1000);
#endif
#if (MQTT_REPORT_APP)
#if (HEARTBEAT_REPORT_APP)
mqttSend(MQTT_TOPIC_APP, APP_NAME);
#endif
#if (MQTT_REPORT_VERSION)
#if (HEARTBEAT_REPORT_VERSION)
mqttSend(MQTT_TOPIC_VERSION, APP_VERSION);
#endif
#if (MQTT_REPORT_HOSTNAME)
#if (HEARTBEAT_REPORT_HOSTNAME)
mqttSend(MQTT_TOPIC_HOSTNAME, getSetting("hostname").c_str());
#endif
#if (MQTT_REPORT_IP)
#if (HEARTBEAT_REPORT_IP)
mqttSend(MQTT_TOPIC_IP, getIP().c_str());
#endif
#if (MQTT_REPORT_MAC)
#if (HEARTBEAT_REPORT_MAC)
mqttSend(MQTT_TOPIC_MAC, WiFi.macAddress().c_str());
#endif
#if (MQTT_REPORT_RSSI)
#if (HEARTBEAT_REPORT_RSSI)
mqttSend(MQTT_TOPIC_RSSI, String(WiFi.RSSI()).c_str());
#endif
#if (MQTT_REPORT_UPTIME)
#if (HEARTBEAT_REPORT_UPTIME)
mqttSend(MQTT_TOPIC_UPTIME, String(uptime_seconds).c_str());
#if ENABLE_INFLUXDB
influxDBSend(MQTT_TOPIC_UPTIME, String(uptime_seconds).c_str());
#endif
#endif
#if (MQTT_REPORT_FREEHEAP)
#if (HEARTBEAT_REPORT_FREEHEAP)
mqttSend(MQTT_TOPIC_FREEHEAP, String(free_heap).c_str());
#if ENABLE_INFLUXDB
influxDBSend(MQTT_TOPIC_FREEHEAP, String(free_heap).c_str());
#endif
#endif
#if (MQTT_REPORT_RELAY)
#if (HEARTBEAT_REPORT_RELAY)
relayMQTT();
#endif
#if LIGHT_PROVIDER != LIGHT_PROVIDER_NONE
#if (MQTT_REPORT_COLOR)
#if (HEARTBEAT_REPORT_COLOR)
mqttSend(MQTT_TOPIC_COLOR, lightColor().c_str());
#endif
#endif
#if (MQTT_REPORT_VCC)
#if (HEARTBEAT_REPORT_VCC)
#if ENABLE_ADC_VCC
mqttSend(MQTT_TOPIC_VCC, String(ESP.getVcc()).c_str());
#endif
#endif
#if (MQTT_REPORT_STATUS)
#if (HEARTBEAT_REPORT_STATUS)
mqttSend(MQTT_TOPIC_STATUS, MQTT_STATUS_ONLINE, true);
#endif


+ 1
- 1
code/espurna/mqtt.ino View File

@ -125,7 +125,7 @@ void mqttSend(const char * topic, const char * message, bool force) {
element.topic = strdup(topic);
element.message = strdup(message);
_mqtt_queue.push_back(element);
mqttFlushTicker.once_ms(100, _mqttFlush);
mqttFlushTicker.once_ms(MQTT_USE_JSON_DELAY, _mqttFlush);
} else {
String mqttGetter = getSetting("mqttGetter", MQTT_USE_GETTER);
String path = mqttTopic + String(topic) + mqttGetter;


+ 1
- 1
code/espurna/relay.ino View File

@ -413,7 +413,7 @@ void relayMQTTCallback(unsigned int type, const char * topic, const char * paylo
if (type == MQTT_CONNECT_EVENT) {
#if not MQTT_REPORT_RELAY
#if not HEARTBEAT_REPORT_RELAY
relayMQTT();
#endif


Loading…
Cancel
Save