Merged xoseperez/espurna into master

.gitignore

@@ -12,3 +12,5 @@ credentials.h
 node_modules
 code/utils
 custom.h
+.python
+.env

CHANGELOG.md

@@ -3,6 +3,31 @@
 The format is based on [Keep a Changelog](http://keepachangelog.com/)
 and this project adheres to [Semantic Versioning](http://semver.org/).
 
+## [1.11.4] 2018-01-09
+### Fixed
+- Fix bug in RF Bridge when RF code contains the stop byte. Check overflow (#357)
+- Fixed typos in code and wiki (Thanks to Ryan Jarvis)
+- Fix bug in magnitude topic and units (#355)
+
+### Added
+- Small core build to allow two-step flashing method for big binaries
+- Thingspeak support (#371, disabled by default)
+- Color synchronization between lights using MQTT (#362)
+- Support for Arilux AL-LC02 (#347)
+- Support for Tarpuna Shield for Wemos D1
+- Build option to disable password checking (#373)
+- Option to report sensor address via MQTT (#377, I2C address, GPIO, Dallas address,...)
+- Added binary size to memanalyzer script
+- Option to specify custom client ID for MQTT connection (#368)
+- Cross-platform ESPurna OTA Manager implemented in python (untested)
+- Terminal command to get or set digital GPIO
+
+### Changed
+- Using 2.3.0 for prebuilt binaries
+- Fix delay in DHT sensor
+- Allow MQTT keep alive value of up to 3600s
+- Changed Sonoff 4CH Pro definitions to support built-in interlock mode (#333)
+
 ## [1.11.3] 2018-01-02
 ### Fixed
 - Fix uninitialized PWM channels bug (#356)

README.md

@@ -4,7 +4,7 @@ ESPurna ("spark" in Catalan) is a custom firmware for ESP8266 based smart switch
 It was originally developed with the **[IteadStudio Sonoff](https://www.itead.cc/sonoff-wifi-wireless-switch.html)** in mind but now it supports a growing number of ESP8266-based boards.
 It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries.
 
-> **Current Release Version is 1.11.3**, read the [changelog](https://bitbucket.org/xoseperez/espurna/src/master/CHANGELOG.md).
+> **Current Release Version is 1.11.4**, read the [changelog](https://bitbucket.org/xoseperez/espurna/src/master/CHANGELOG.md).
 
 > **NOTICE**: Default flash layout changed in 1.8.3, as an unpredicted consequence devices will not be able to persist/retrieve configuration if flashed with 1.8.3 via **OTA** from **PlatformIO**. Please check issue #187.
 
@@ -37,6 +37,7 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
     * Enable/disable pulse mode
     * Change LED notification mode
     * Remote reset the board
+    * Fully configurable in webUI (broker, user, password, QoS, keep alive time, retain flag, client ID)
 * **Alexa** integration using the [FauxmoESP Library](https://bitbucket.org/xoseperez/fauxmoesp)
 * [**Google Assistant**](http://tinkerman.cat/using-google-assistant-control-your-esp8266-devices/) integration using IFTTT and Webhooks (Google Home, Allo)
 * [**Domoticz**](https://domoticz.com/) integration via MQTT
@@ -45,13 +46,14 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
     * Support for lights (color, brightness, on/off state)
     * Supports MQTT auto-discover feature (both switches and lights)
 * [**InfluxDB**](https://www.influxdata.com/) integration via HTTP API
+* [**Thingspeak**](https://thingspeak.com/) integration via HTTP API (HTTPS available for custom builds)
 * Support for different **sensors**
     * Environment
-        * **DHT11 / DHT22 / DHT21 / AM2301 / Itead's SI7021** (supports celsius & fahrenheit reporting)
+        * **DHT11 / DHT22 / DHT21 / AM2301 / Itead's SI7021**
         * **BMP280** and **BME280** temperature, humidity (BME280) and pressure sensor by Bosch
         * **SI7021** temperature and humidity sensor
         * **SHT3X** temperature and humidity sensor over I2C (Wemos shield)
-        * **Dallas OneWire sensors** like the DS18B20 (supports celsius & fahrenheit reporting)
+        * **Dallas OneWire sensors** like the DS18B20
         * **MHZ19** CO2 sensor
         * **PMSX003** dust sensor
         * **BH1750** luminosity sensor
@@ -62,6 +64,7 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
         * **V9261F** power monitor chip
     * Raw analog and digital sensors
     * Simple pulse counter
+    * All temperature sensors support Fahrenheit and Celsius
 * Support for LED lights
     * MY92XX-based light bulbs and PWM LED strips (dimmers) up to 5 channels (RGB, cold white and warm white, for instance)
     * RGB and HSV color codes supported
@@ -69,6 +72,7 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
     * Temperature color supported (in mired and kelvin) via MQTT / REST API
     * Flicker-free PWM management
     * Soft color transitions
+    * Color synchronization between light using MQTT
 * Fast asynchronous **HTTP Server**
     * Configurable port
     * Basic authentication
@@ -106,6 +110,18 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
     * Extra long click (>10 seconds) to go back to factory settings (only main button)
     * Specific definitions for touch button devices (ESPurna Switch, Sonoff Touch & T1)
 
+## Contribute
+
+There are several ways to contribute to ESpurna development. You can contribute to the repository by doing:
+
+* Pull requests (fixes, enhancements, new features... are very welcome)
+* Documentation (I reckon I'm bad at it)
+* Testing (filing issues or help resolving them, they take a lot of time and sometimes I don't have the required hardware to test them all)
+
+And of course you can always buy me a beer, coffee, tea,... via the donation button below.
+
+[![Donate to ESPurna Project](https://img.shields.io/badge/Donate-PayPal-green.svg)](https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=xose%2eperez%40gmail%2ecom&lc=US&no_note=0&currency_code=EUR&bn=PP%2dDonationsBF%3abtn_donate_LG%2egif%3aNonHostedGuest)
+
 ## Documentation
 
 For more information please refer to the [ESPurna Wiki](https://bitbucket.org/xoseperez/espurna/wiki/Home).
@@ -139,11 +155,11 @@ Here is the list of supported hardware. For more information please refer to the
 |![EXS Wifi Relay v3.1](images/devices/exs-wifi-relay-v31.jpg)|||
 |**EXS Wifi Relay v3.1**|||
 
-**Other supported boards:** Itead Sonoff LED, Itead Sonoff Dual R2, Huacanxing H802, WiOn 50055, ManCaveMade ESP-Live, InterMitTech QuinLED 2.6, Arilux AL-LC01, Arilux AL-LC06, Arilux AL-LC11, Arilux E27 light bulb, Xenon SM-PW702U, Authometion LYT8266, YJZK 2-gang switch.
+**Other supported boards:** Itead Sonoff LED, Itead Sonoff Dual R2, Huacanxing H802, WiOn 50055, ManCaveMade ESP-Live, InterMitTech QuinLED 2.6, Arilux AL-LC01, Arilux AL-LC02, Arilux AL-LC06, Arilux AL-LC11, Arilux E27 light bulb, Xenon SM-PW702U, Authometion LYT8266, YJZK 2-gang switch.
 
 ## License
 
-Copyright (C) 2016-2017 by Xose Pérez (@xoseperez)
+Copyright (C) 2016-2018 by Xose Pérez (@xoseperez)
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

code/build.sh

@@ -45,7 +45,7 @@ echo "Building firmware images..."
 mkdir -p firmware/espurna-$version
 for environment in $environments; do
     echo "* espurna-$version-$environment.bin"
-    platformio run -s -e $environment || exit
+    platformio run --silent --environment $environment || exit
     mv .pioenvs/$environment/firmware.bin firmware/espurna-$version/espurna-$version-$environment.bin
 done
 echo "--------------------------------------------------------------"

code/core_version.py

@@ -1,51 +0,0 @@
-#!/bin/python
-
-import json
-import commands
-import subprocess
-import os
-import sys
-
-def core_version(env):
-
-    # Get the core folder
-    fwdir = env["FRAMEWORK_ARDUINOESP8266_DIR"]
-
-    # Get the core version
-    with open(fwdir + '/package.json') as data_file:
-        data = json.load(data_file)
-    core_version = data["version"].upper().replace(".", "_").replace("-", "_")
-    print "CORE VERSION: %s" % core_version
-
-    # Get git version
-    pr = subprocess.Popen(
-        "git --git-dir .git rev-parse --short=8 HEAD 2>/dev/null || echo ffffffff",
-        cwd = fwdir,
-        shell = True, stdout = subprocess.PIPE, stderr = subprocess.PIPE )
-    (out, error) = pr.communicate()
-    git_version = str(out).replace('\n', "")
-    print "GIT VERSION: %s" % git_version
-
-    #env["BUILD_FLAGS"][0] += str(" -DARDUINO_ESP8266_RELEASE=" + core_version)
-    #env["BUILD_FLAGS"][0] += str(" -DARDUINO_ESP8266_RELEASE_" + core_version)
-    #env["BUILD_FLAGS"][0] += str(" -DARDUINO_ESP8266_GIT_VER=" + git_version)
-
-    with open('espurna/config/core_version.h', 'w') as the_file:
-        the_file.write('#define ARDUINO_ESP8266_RELEASE "%s"\n' % core_version)
-        the_file.write('#define ARDUINO_ESP8266_RELEASE_%s\n' % core_version)
-        the_file.write('#define ARDUINO_ESP8266_GIT_VER "%s"\n' % git_version)
-
-    #env.Append(
-    #    CFLAGS = [
-    #        str("-DARDUINO_ESP8266_RELEASE=" + core_version),
-    #        str("-DARDUINO_ESP8266_RELEASE_" + core_version),
-    #        str("-DARDUINO_ESP8266_GIT_VER=" + git_version)
-    #    ]
-    #)
-
-    #print " -DARDUINO_ESP8266_RELEASE=" + core_version +
-    #    " -DARDUINO_ESP8266_RELEASE_" + core_version +
-    #    " -DARDUINO_ESP8266_GIT_VER=" + git_version
-
-Import('env')
-core_version(env)

code/espurna/alexa.ino

@@ -2,7 +2,7 @@
 
 ALEXA MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/api.ino

@@ -2,7 +2,7 @@
 
 API MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/button.ino

@@ -2,7 +2,7 @@
 
 BUTTON MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -80,7 +80,7 @@ uint8_t mapEvent(uint8_t event, uint8_t count, uint16_t length) {
 
 void buttonEvent(unsigned int id, unsigned char event) {
 
-    DEBUG_MSG_P(PSTR("[BUTTON] Pressed #%d, event: %d\n"), id, event);
+    DEBUG_MSG_P(PSTR("[BUTTON] Button #%d event %d\n"), id, event);
     if (event == 0) return;
 
     #if MQTT_SUPPORT

code/espurna/config/arduino.h

@@ -57,6 +57,8 @@
 //#define GENERIC_8CH
 //#define ARILUX_AL_LC01
 //#define ARILUX_AL_LC11
+//#define ARILUX_AL_LC02
+//#define WEMOS_D1_TARPUNA_SHIELD
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)
@@ -69,7 +71,7 @@
 //#define DOMOTICZ_SUPPORT       0
 //#define HOMEASSISTANT_SUPPORT  0
 //#define I2C_SUPPORT            1
-//#define INFLUXDB_SUPPORT       0
+//#define INFLUXDB_SUPPORT       1
 //#define IR_SUPPORT             1
 //#define LLMNR_SUPPORT          1  // Only with Arduino Core 2.4.0
 //#define MDNS_SUPPORT           0
@@ -82,6 +84,7 @@
 //#define SSDP_SUPPORT           1
 //#define TELNET_SUPPORT         0
 //#define TERMINAL_SUPPORT       0
+//#define THINGSPEAK_SUPPORT     0
 //#define WEB_SUPPORT            0
 
 //--------------------------------------------------------------------------------

code/espurna/config/general.h

@@ -7,13 +7,29 @@
 // GENERAL
 //------------------------------------------------------------------------------
 
+#define DEVICE_NAME             MANUFACTURER "_" DEVICE     // Concatenate both to get a unique device name
 #define ADMIN_PASS              "fibonacci" // Default password (WEB, OTA, WIFI)
-#define DEVICE_NAME             MANUFACTURER "_" DEVICE // Concatenate both to get a unique device name
+#define USE_PASSWORD            1           // Insecurity caution! Disabling this will disable password querying completely.
 #define LOOP_DELAY_TIME         10          // Delay for this millis in the main loop [0-250]
 
 #define ARRAYINIT(type, name, ...) \
     type name[] = {__VA_ARGS__};
 
+//------------------------------------------------------------------------------
+// ESPURNA CORE
+//------------------------------------------------------------------------------
+
+#ifdef ESPURNA_CORE
+    #define ALEXA_SUPPORT          0
+    #define DOMOTICZ_SUPPORT       0
+    #define HOMEASSISTANT_SUPPORT  0
+    #define MQTT_SUPPORT           0
+    #define NTP_SUPPORT            0
+    #define WEB_SUPPORT            0
+    #define SENSOR_SUPPORT         0
+    #define I2C_SUPPORT            0
+#endif
+
 //------------------------------------------------------------------------------
 // TELNET
 //------------------------------------------------------------------------------
@@ -74,7 +90,6 @@
 //------------------------------------------------------------------------------
 
 // General debug options and macros
-#define DEBUG_FORMAT_MAX_LENGTH 80
 #define DEBUG_SUPPORT           DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT
 
 #if DEBUG_SUPPORT
@@ -179,10 +194,21 @@ PROGMEM const char* const custom_reset_string[] = {
 // BUTTON
 //------------------------------------------------------------------------------
 
+#ifndef BUTTON_DEBOUNCE_DELAY
 #define BUTTON_DEBOUNCE_DELAY       50          // Debounce delay (ms)
+#endif
+
+#ifndef BUTTON_DBLCLICK_DELAY
 #define BUTTON_DBLCLICK_DELAY       500         // Time in ms to wait for a second (or third...) click
+#endif
+
+#ifndef BUTTON_LNGCLICK_DELAY
 #define BUTTON_LNGCLICK_DELAY       1000        // Time in ms holding the button down to get a long click
+#endif
+
+#ifndef BUTTON_LNGLNGCLICK_DELAY
 #define BUTTON_LNGLNGCLICK_DELAY    10000       // Time in ms holding the button down to get a long-long click
+#endif
 
 #define BUTTON_EVENT_NONE           0
 #define BUTTON_EVENT_PRESSED        1
@@ -208,7 +234,7 @@ PROGMEM const char* const custom_reset_string[] = {
 #define RELAY_BOOT_OFF          0
 #define RELAY_BOOT_ON           1
 #define RELAY_BOOT_SAME         2
-#define RELAY_BOOT_TOOGLE       3
+#define RELAY_BOOT_TOGGLE       3
 
 #define RELAY_TYPE_NORMAL       0
 #define RELAY_TYPE_INVERSE      1
@@ -305,7 +331,7 @@ PROGMEM const char* const custom_reset_string[] = {
 #endif
 
 // This is not working at the moment!!
-// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core staging version.
+// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0
 #define WEB_SSL_ENABLED         0           // Use HTTPS web interface
 
 #define WEB_MODE_NORMAL         0
@@ -404,7 +430,7 @@ PROGMEM const char* const custom_reset_string[] = {
 // MQTT OVER SSL
 // Using MQTT over SSL works pretty well but generates problems with the web interface.
 // It could be a good idea to use it in conjuntion with WEB_SUPPORT=0.
-// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core staging version.
+// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
 //
 // You can use it with MQTT_USE_ASYNC=1 (AsyncMqttClient library)
 // but you might experience hiccups on the web interface, so my recommendation is:
@@ -588,6 +614,11 @@ PROGMEM const char* const custom_reset_string[] = {
 #define HOMEASSISTANT_SUPPORT   MQTT_SUPPORT    // Build with home assistant support (if MQTT, 1.64Kb)
 #endif
 
+#if HOMEASSISTANT_SUPPORT
+#undef MQTT_SUPPORT
+#define MQTT_SUPPORT            1               // If Home Assistant enabled enable MQTT
+#endif
+
 #define HOMEASSISTANT_ENABLED   0               // Integration not enabled by default
 #define HOMEASSISTANT_PREFIX    "homeassistant" // Default MQTT prefix
 
@@ -606,6 +637,41 @@ PROGMEM const char* const custom_reset_string[] = {
 #define INFLUXDB_USERNAME       ""              // Default username
 #define INFLUXDB_PASSWORD       ""              // Default password
 
+// -----------------------------------------------------------------------------
+// THINGSPEAK
+// -----------------------------------------------------------------------------
+
+#ifndef THINGSPEAK_SUPPORT
+#define THINGSPEAK_SUPPORT      1               // Enable Thingspeak support by default (2.56Kb)
+#endif
+
+#define THINGSPEAK_ENABLED      0               // Thingspeak disabled by default
+#define THINGSPEAK_APIKEY       ""              // Default API KEY
+
+#define THINGSPEAK_USE_ASYNC    1               // Use AsyncClient instead of WiFiClientSecure
+
+// THINGSPEAK OVER SSL
+// Using THINGSPEAK over SSL works well but generates problems with the web interface,
+// so you should compile it with WEB_SUPPORT to 0.
+// When THINGSPEAK_USE_ASYNC is 1, requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
+#define THINGSPEAK_USE_SSL      0               // Use secure connection
+#define THINGSPEAK_FINGERPRINT  "78 60 18 44 81 35 BF DF 77 84 D4 0A 22 0D 9B 4E 6C DC 57 2C"
+
+#define THINGSPEAK_HOST         "api.thingspeak.com"
+#if THINGSPEAK_USE_SSL
+#define THINGSPEAK_PORT         443
+#else
+#define THINGSPEAK_PORT         80
+#endif
+#define THINGSPEAK_URL          "/update"
+#define THINGSPEAK_MIN_INTERVAL 15000           // Minimum interval between POSTs (in millis)
+
+#ifndef ASYNC_TCP_SSL_ENABLED
+#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC
+#undef THINGSPEAK_SUPPORT                       // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED
+#endif
+#endif
+
 // -----------------------------------------------------------------------------
 // NTP
 // -----------------------------------------------------------------------------

code/espurna/config/hardware.h

@@ -64,6 +64,16 @@
     #define LED1_PIN            2
     #define LED1_PIN_INVERSE    1
 
+#elif defined(WEMOS_D1_TARPUNA_SHIELD)
+
+    // Info
+    #define MANUFACTURER        "WEMOS"
+    #define DEVICE              "D1_TARPUNA_SHIELD"
+
+    // Relays
+    #define RELAY1_PIN          12
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+
 // -----------------------------------------------------------------------------
 // ESPurna
 // -----------------------------------------------------------------------------
@@ -444,6 +454,37 @@
     #define BUTTON3_RELAY       3
     #define BUTTON4_RELAY       4
 
+    // Sonoff 4CH Pro uses a secondary STM32 microcontroller to handle
+    // buttons and relays, but it also forwards button presses to the ESP8285.
+    // This allows ESPurna to handle button presses -almost- the same way
+    // as with other devices except:
+    // * Double click seems to break/disable the button on the STM32 side
+    // * With S6 switch to 1 (self-locking and inching modes) everything's OK
+    // * With S6 switch to 0 (interlock mode) if there is a relay ON
+    //    and you click on another relay button, the STM32 sends a "press"
+    //    event for the button of the first relay (to turn it OFF) but it
+    //    does not send a "release" event. It's like it's holding the
+    //    button down since you can see it is still LOW.
+    //    Whatever reason the result is that it may actually perform a
+    //    long click or long-long click.
+    // The configuration below make the button toggle the relay on press events
+    // and disables any possibly harmful combination with S6 set to 0.
+    // If you are sure you will only use S6 to 1 you can comment the
+    // BUTTON1_LNGCLICK and BUTTON1_LNGLNGCLICK options below to recover the
+    // AP mode and factory reset functionalities.
+
+    #define BUTTON1_PRESS       BUTTON_MODE_TOGGLE
+    #define BUTTON1_CLICK       BUTTON_MODE_NONE
+    #define BUTTON1_DBLCLICK    BUTTON_MODE_NONE
+    #define BUTTON1_LNGCLICK    BUTTON_MODE_NONE
+    #define BUTTON1_LNGLNGCLICK BUTTON_MODE_NONE
+    #define BUTTON2_PRESS       BUTTON_MODE_TOGGLE
+    #define BUTTON2_CLICK       BUTTON_MODE_NONE
+    #define BUTTON3_PRESS       BUTTON_MODE_TOGGLE
+    #define BUTTON3_CLICK       BUTTON_MODE_NONE
+    #define BUTTON4_PRESS       BUTTON_MODE_TOGGLE
+    #define BUTTON4_CLICK       BUTTON_MODE_NONE
+
     // Relays
     #define RELAY1_PIN          12
     #define RELAY2_PIN          5
@@ -728,7 +769,6 @@
     // LEDs
     #define LED1_PIN            13
     #define LED1_PIN_INVERSE    0
-    #define LED_WIFI            0
 
 
 // -----------------------------------------------------------------------------
@@ -1183,6 +1223,26 @@
     #define LIGHT_CH4_INVERSE   0
 
 
+#elif defined(ARILUX_AL_LC02)
+
+    // Info
+    #define MANUFACTURER        "ARILUX"
+    #define DEVICE              "AL_LC02"
+    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT   1
+
+    // Light
+    #define LIGHT_CHANNELS      4
+    #define LIGHT_CH1_PIN       12      // RED
+    #define LIGHT_CH2_PIN       5       // GREEN
+    #define LIGHT_CH3_PIN       13      // BLUE
+    #define LIGHT_CH4_PIN       15      // WHITE1
+    #define LIGHT_CH1_INVERSE   0
+    #define LIGHT_CH2_INVERSE   0
+    #define LIGHT_CH3_INVERSE   0
+    #define LIGHT_CH4_INVERSE   0
+
 #elif defined(ARILUX_AL_LC06)
 
     // Info

code/espurna/config/sensors.h

@@ -36,6 +36,9 @@
 #define HUMIDITY_DRY                        2
 #define HUMIDITY_WET                        3
 
+#define SENSOR_PUBLISH_ADDRESSES            0               // Publish sensor addresses
+#define SENSOR_ADDRESS_TOPIC                "address"       // Topic to publish sensor addresses
+
 //--------------------------------------------------------------------------------
 // Sensor ID
 // These should remain over time, do not modify them, only add new ones at the end
@@ -161,8 +164,8 @@
 #define DALLAS_PIN                      14
 #endif
 
-#define DALLAS_RESOLUTION               9        // Not used atm
-#define DALLAS_READ_INTERVAL            2000     // Force sensor read & cache every 2 seconds
+#define DALLAS_RESOLUTION               9           // Not used atm
+#define DALLAS_READ_INTERVAL            2000        // Force sensor read & cache every 2 seconds
 
 //------------------------------------------------------------------------------
 // DHTXX temperature/humidity sensor
@@ -438,15 +441,17 @@
 // Sensor helpers configuration
 // =============================================================================
 
+#ifndef SENSOR_SUPPORT
 #if ANALOG_SUPPORT || BH1750_SUPPORT || BMX280_SUPPORT || DALLAS_SUPPORT \
     || DHT_SUPPORT || DIGITAL_SUPPORT || ECH1560_SUPPORT \
     || EMON_ADC121_SUPPORT || EMON_ADS1X15_SUPPORT \
     || EMON_ANALOG_SUPPORT || EVENTS_SUPPORT || HLW8012_SUPPORT \
     || MHZ19_SUPPORT || PMSX003_SUPPORT || SHT3X_I2C_SUPPORT \
     || SI7021_SUPPORT || V9261F_SUPPORT
-
 #define SENSOR_SUPPORT                      1
-
+#else
+#define SENSOR_SUPPORT                      0
+#endif
 #endif
 
 // -----------------------------------------------------------------------------
@@ -512,12 +517,12 @@ PROGMEM const char magnitude_reactive_power_topic[] = "reactive";
 PROGMEM const char magnitude_power_factor_topic[] = "factor";
 PROGMEM const char magnitude_energy_topic[] = "energy";
 PROGMEM const char magnitude_energy_delta_topic[] = "energy_delta";
-PROGMEM const char magnitude_pm1dot0_topic[] = "pm1dot0";
-PROGMEM const char magnitude_pm2dot5_topic[] = "pm2dot5";
-PROGMEM const char magnitude_pm10_topic[] = "pm10";
 PROGMEM const char magnitude_analog_topic[] = "analog";
 PROGMEM const char magnitude_digital_topic[] = "digital";
 PROGMEM const char magnitude_events_topic[] = "events";
+PROGMEM const char magnitude_pm1dot0_topic[] = "pm1dot0";
+PROGMEM const char magnitude_pm2dot5_topic[] = "pm2dot5";
+PROGMEM const char magnitude_pm10_topic[] = "pm10";
 PROGMEM const char magnitude_co2_topic[] = "co2";
 PROGMEM const char magnitude_lux_topic[] = "lux";
 
@@ -526,8 +531,8 @@ PROGMEM const char* const magnitude_topics[] = {
     magnitude_pressure_topic, magnitude_current_topic, magnitude_voltage_topic,
     magnitude_active_power_topic, magnitude_apparent_power_topic, magnitude_reactive_power_topic,
     magnitude_power_factor_topic, magnitude_energy_topic, magnitude_energy_delta_topic,
-    magnitude_pm1dot0_topic, magnitude_pm2dot5_topic, magnitude_pm10_topic,
     magnitude_analog_topic, magnitude_digital_topic, magnitude_events_topic,
+    magnitude_pm1dot0_topic, magnitude_pm2dot5_topic, magnitude_pm10_topic,
     magnitude_co2_topic, magnitude_lux_topic
 };
 
@@ -549,8 +554,8 @@ PROGMEM const char* const magnitude_units[] = {
     magnitude_hectopascals, magnitude_amperes, magnitude_volts,
     magnitude_watts, magnitude_watts, magnitude_watts,
     magnitude_percentage, magnitude_joules, magnitude_joules,
-    magnitude_ugm3, magnitude_ugm3, magnitude_ugm3,
     magnitude_empty, magnitude_empty, magnitude_empty,
+    magnitude_ugm3, magnitude_ugm3, magnitude_ugm3,
     magnitude_ppm, magnitude_lux
 };
 

code/espurna/config/version.h

@@ -1,5 +1,5 @@
 #define APP_NAME                "ESPURNA"
-#define APP_VERSION             "1.11.3"
+#define APP_VERSION             "1.11.4"
 #define APP_AUTHOR              "xose.perez@gmail.com"
 #define APP_WEBSITE             "http://tinkerman.cat"
 #define CFG_VERSION             3

code/espurna/debug.ino

@@ -2,7 +2,7 @@
 
 DEBUG MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -55,17 +55,17 @@ void debugSend(const char * format, ...) {
 
 }
 
-void debugSend_P(PGM_P format, ...) {
+void debugSend_P(PGM_P format_P, ...) {
 
-    char f[DEBUG_FORMAT_MAX_LENGTH+1];
-    memcpy_P(f, format, DEBUG_FORMAT_MAX_LENGTH);
+    char format[strlen_P(format_P)+1];
+    memcpy_P(format, format_P, sizeof(format));
 
     va_list args;
-    va_start(args, format);
+    va_start(args, format_P);
     char test[1];
-    int len = ets_vsnprintf(test, 1, f, args) + 1;
+    int len = ets_vsnprintf(test, 1, format, args) + 1;
     char * buffer = new char[len];
-    ets_vsnprintf(buffer, len, f, args);
+    ets_vsnprintf(buffer, len, format, args);
     va_end(args);
 
     #if DEBUG_SERIAL_SUPPORT

code/espurna/domoticz.ino

@@ -2,7 +2,7 @@
 
 DOMOTICZ MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -97,7 +97,7 @@ void _domoticzWebSocketOnSend(JsonObject& root) {
     root["dczTopicIn"] = getSetting("dczTopicIn", DOMOTICZ_IN_TOPIC);
     root["dczTopicOut"] = getSetting("dczTopicOut", DOMOTICZ_OUT_TOPIC);
 
-    JsonArray& relays = root.createNestedArray("dczRelayIdx");
+    JsonArray& relays = root.createNestedArray("dczRelays");
     for (byte i=0; i<relayCount(); i++) {
         relays.add(domoticzIdx(i));
     }

code/espurna/espurna.ino

@@ -2,7 +2,7 @@
 
 ESPurna
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -128,8 +128,7 @@ void welcome() {
 
     // -------------------------------------------------------------------------
 
-    DEBUG_MSG_P(PSTR("[INIT] MANUFACTURER: %s\n"), MANUFACTURER);
-    DEBUG_MSG_P(PSTR("[INIT] DEVICE: %s\n"), DEVICE);
+    DEBUG_MSG_P(PSTR("[INIT] BOARD: %s\n"), getBoardName().c_str());
     DEBUG_MSG_P(PSTR("[INIT] SUPPORT:"));
 
     #if ALEXA_SUPPORT
@@ -189,6 +188,9 @@ void welcome() {
     #if TERMINAL_SUPPORT
         DEBUG_MSG_P(PSTR(" TERMINAL"));
     #endif
+    #if THINGSPEAK_SUPPORT
+        DEBUG_MSG_P(PSTR(" THINGSPEAK"));
+    #endif
     #if WEB_SUPPORT
         DEBUG_MSG_P(PSTR(" WEB"));
     #endif
@@ -286,6 +288,7 @@ void setup() {
     if (getSetting("hostname").length() == 0) {
         setSetting("hostname", getIdentifier());
     }
+    setBoardName();
 
     // Cache loop delay value to speed things (recommended max 250ms)
     _loopDelay = atol(getSetting("loopDelay", LOOP_DELAY_TIME).c_str());
@@ -357,6 +360,9 @@ void setup() {
     #if INFLUXDB_SUPPORT
         idbSetup();
     #endif
+    #if THINGSPEAK_SUPPORT
+        tspkSetup();
+    #endif
     #if RF_SUPPORT
         rfSetup();
     #endif
@@ -427,6 +433,9 @@ void loop() {
     #if SENSOR_SUPPORT
         sensorLoop();
     #endif
+    #if THINGSPEAK_SUPPORT
+        tspkLoop();
+    #endif
 
     // Power saving delay
     delay(_loopDelay);

code/espurna/filters/BaseFilter.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Base Filter (other filters inherit from this)
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT

code/espurna/filters/MaxFilter.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Max Filter
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT

code/espurna/filters/MedianFilter.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Median Filter
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT

code/espurna/filters/MovingAverageFilter.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Moving Average Filter
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT

code/espurna/gpio.ino

@@ -2,7 +2,7 @@
 
 GPIO MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/homeassitant.ino

@@ -2,7 +2,7 @@
 
 HOME ASSISTANT MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/i2c.ino

@@ -2,7 +2,7 @@
 
 I2C MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/influxdb.ino

@@ -1,8 +1,8 @@
 /*
 
-I2C MODULE
+INFLUXDB MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/ir.ino

@@ -2,8 +2,8 @@
 
 IR MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
-Copyright (C) 2017 by François Déchery
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by François Déchery
 
 */
 

code/espurna/led.ino

@@ -2,7 +2,7 @@
 
 LED MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/light.ino

@@ -2,7 +2,7 @@
 
 LIGHT MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -309,6 +309,17 @@ void _toLong(char * color, size_t len) {
     _toLong(color, len, false);
 }
 
+void _toCSV(char * buffer, size_t len, bool applyBrightness) {
+    char num[10];
+    float b = applyBrightness ? (float) _light_brightness / LIGHT_MAX_BRIGHTNESS : 1;
+    for (unsigned char i=0; i<_light_channel.size(); i++) {
+        itoa(_light_channel[i].value * b, num, 10);
+        if (i>0) strncat(buffer, ",", len--);
+        strncat(buffer, num, len);
+        len = len - strlen(num);
+    }
+}
+
 // Thanks to Sacha Telgenhof for sharing this code in his AiLight library
 // https://github.com/stelgenhof/AiLight
 void _fromKelvin(unsigned long kelvin) {
@@ -451,6 +462,7 @@ void _lightColorRestore() {
 #if MQTT_SUPPORT
 void _lightMQTTCallback(unsigned int type, const char * topic, const char * payload) {
 
+    String mqtt_group_color = getSetting("mqttGroupColor");
 
     if (type == MQTT_CONNECT_EVENT) {
 
@@ -463,6 +475,10 @@ void _lightMQTTCallback(unsigned int type, const char * topic, const char * payl
             mqttSubscribe(MQTT_TOPIC_COLOR_HSV);
         }
 
+        // Group color
+        if (mqtt_group_color.length() > 0) mqttSubscribeRaw(mqtt_group_color.c_str());
+
+        // Channels
         char buffer[strlen(MQTT_TOPIC_CHANNEL) + 3];
         snprintf_P(buffer, sizeof(buffer), PSTR("%s/+"), MQTT_TOPIC_CHANNEL);
         mqttSubscribe(buffer);
@@ -471,6 +487,13 @@ void _lightMQTTCallback(unsigned int type, const char * topic, const char * payl
 
     if (type == MQTT_MESSAGE_EVENT) {
 
+        // Group color
+        if ((mqtt_group_color.length() > 0) & (mqtt_group_color.equals(topic))) {
+            lightColor(payload, true);
+            lightUpdate(true, mqttForward(), false);
+            return;
+        }
+
         // Match topic
         String t = mqttSubtopic((char *) topic);
 
@@ -478,28 +501,33 @@ void _lightMQTTCallback(unsigned int type, const char * topic, const char * payl
         if (t.equals(MQTT_TOPIC_MIRED)) {
             _fromMireds(atol(payload));
             lightUpdate(true, mqttForward());
+            return;
         }
 
         // Color temperature in kelvins
         if (t.equals(MQTT_TOPIC_KELVIN)) {
             _fromKelvin(atol(payload));
             lightUpdate(true, mqttForward());
+            return;
         }
 
         // Color
         if (t.equals(MQTT_TOPIC_COLOR) || t.equals(MQTT_TOPIC_COLOR_RGB)) { // DEPRECATE MQTT_TOPIC_COLOR
             lightColor(payload, true);
             lightUpdate(true, mqttForward());
+            return;
         }
         if (t.equals(MQTT_TOPIC_COLOR_HSV)) {
             lightColor(payload, false);
             lightUpdate(true, mqttForward());
+            return;
         }
 
         // Brightness
         if (t.equals(MQTT_TOPIC_BRIGHTNESS)) {
             _light_brightness = constrain(atoi(payload), 0, LIGHT_MAX_BRIGHTNESS);
             lightUpdate(true, mqttForward());
+            return;
         }
 
         // Channel
@@ -511,6 +539,7 @@ void _lightMQTTCallback(unsigned int type, const char * topic, const char * payl
             }
             lightChannel(channelID, atoi(payload));
             lightUpdate(true, mqttForward());
+            return;
         }
 
     }
@@ -519,7 +548,7 @@ void _lightMQTTCallback(unsigned int type, const char * topic, const char * payl
 
 void lightMQTT() {
 
-    char buffer[12];
+    char buffer[20];
 
     if (_light_has_color) {
 
@@ -548,6 +577,15 @@ void lightMQTT() {
 
 }
 
+void lightMQTTGroup() {
+    String mqtt_group_color = getSetting("mqttGroupColor");
+    if (mqtt_group_color.length()>0) {
+        char buffer[20];
+        _toCSV(buffer, sizeof(buffer), true);
+        mqttSendRaw(mqtt_group_color.c_str(), buffer);
+    }
+}
+
 #endif
 
 // -----------------------------------------------------------------------------
@@ -566,7 +604,7 @@ unsigned char lightWhiteChannels() {
     return _light_channel.size() % 3;
 }
 
-void lightUpdate(bool save, bool forward) {
+void lightUpdate(bool save, bool forward, bool group_forward) {
 
     // Configure color transition
     _light_steps_left = _light_use_transitions ? LIGHT_TRANSITION_STEPS : 1;
@@ -575,6 +613,7 @@ void lightUpdate(bool save, bool forward) {
     // Report color & brightness to MQTT broker
     #if MQTT_SUPPORT
         if (forward) lightMQTT();
+        if (group_forward) lightMQTTGroup();
     #endif
 
     // Report color to WS clients (using current brightness setting)
@@ -589,6 +628,10 @@ void lightUpdate(bool save, bool forward) {
 
 };
 
+void lightUpdate(bool save, bool forward) {
+    lightUpdate(save, forward, true);
+}
+
 #if LIGHT_SAVE_ENABLED == 0
 void lightSave() {
     _lightColorSave();
@@ -667,6 +710,7 @@ void lightBrightnessStep(int steps) {
 
 void _lightWebSocketOnSend(JsonObject& root) {
     root["colorVisible"] = 1;
+    root["mqttGroupColor"] = getSetting("mqttGroupColor");
     root["useColor"] = _light_has_color;
     root["useWhite"] = _light_use_white;
     root["useGamma"] = _light_use_gamma;

code/espurna/llmnr.ino

@@ -2,7 +2,7 @@
 
 LLMNR MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/mdns.ino

@@ -2,7 +2,7 @@
 
 MDNS MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -45,7 +45,7 @@ void mdnsSetup() {
     // Public ESPurna related txt for OTA discovery
     MDNS.addServiceTxt("arduino", "tcp", "app_name", APP_NAME);
     MDNS.addServiceTxt("arduino", "tcp", "app_version", APP_VERSION);
-    MDNS.addServiceTxt("arduino", "tcp", "target_board", DEVICE_NAME);
+    MDNS.addServiceTxt("arduino", "tcp", "target_board", getBoardName());
     {
         char buffer[6];
         itoa(ESP.getFlashChipRealSize() / 1024, buffer, 10);
@@ -56,6 +56,11 @@ void mdnsSetup() {
         itoa(ESP.getFlashChipSize() / 1024, buffer, 10);
         MDNS.addServiceTxt("arduino", "tcp", "sdk_size", (const char *) buffer);
     }
+    {
+        char buffer[6];
+        itoa(ESP.getFreeSketchSpace(), buffer, 10);
+        MDNS.addServiceTxt("arduino", "tcp", "free_space", (const char *) buffer);
+    }
 
     _mdns_wifi_onSTA = WiFi.onStationModeGotIP([](WiFiEventStationModeGotIP ipInfo) {
         _mdnsStart();

code/espurna/migrate.ino

@@ -2,7 +2,7 @@
 
 MIGRATE MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -683,6 +683,21 @@ void migrate() {
             setSetting("chLogic", 4, 0);
             setSetting("relays", 1);
 
+        #elif defined(ARILUX_AL_LC02)
+
+            setSetting("board", 52);
+            setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+            setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
+            setSetting("chGPIO", 0, 12);
+            setSetting("chGPIO", 1, 5);
+            setSetting("chGPIO", 2, 13);
+            setSetting("chGPIO", 3, 15);
+            setSetting("chLogic", 0, 0);
+            setSetting("chLogic", 1, 0);
+            setSetting("chLogic", 2, 0);
+            setSetting("chLogic", 3, 0);
+            setSetting("relays", 1);
+
         #else
 
             // Allow users to define new settings without migration config

code/espurna/mqtt.ino

@@ -2,7 +2,7 @@
 
 MQTT MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -45,6 +45,7 @@ bool _mqtt_forward;
 char *_mqtt_user = 0;
 char *_mqtt_pass = 0;
 char *_mqtt_will;
+char *_mqtt_clientid;
 #if MQTT_SKIP_RETAINED
 unsigned long _mqtt_connected_at = 0;
 #endif
@@ -209,6 +210,8 @@ void mqttRegister(mqtt_callback_f callback) {
 // Callbacks
 // -----------------------------------------------------------------------------
 
+#if WEB_SUPPORT
+
 void _mqttWebSocketOnSend(JsonObject& root) {
     root["mqttVisible"] = 1;
     root["mqttStatus"] = mqttConnected();
@@ -216,6 +219,7 @@ void _mqttWebSocketOnSend(JsonObject& root) {
     root["mqttServer"] = getSetting("mqttServer", MQTT_SERVER);
     root["mqttPort"] = getSetting("mqttPort", MQTT_PORT);
     root["mqttUser"] = getSetting("mqttUser");
+    root["mqttClientID"] = getSetting("mqttClientID");
     root["mqttPassword"] = getSetting("mqttPassword");
     root["mqttKeep"] = _mqtt_keepalive;
     root["mqttRetain"] = _mqtt_retain;
@@ -229,6 +233,12 @@ void _mqttWebSocketOnSend(JsonObject& root) {
     root["mqttUseJson"] = getSetting("mqttUseJson", MQTT_USE_JSON).toInt() == 1;
 }
 
+void _mqttConfigure() {
+    if (getSetting("mqttClientID").length() == 0) delSetting("mqttClientID");
+}
+
+#endif
+
 void _mqttCallback(unsigned int type, const char * topic, const char * payload) {
 
     if (type == MQTT_CONNECT_EVENT) {
@@ -309,47 +319,6 @@ void _mqttOnMessage(char* topic, char* payload, unsigned int len) {
 
 }
 
-#if MQTT_USE_ASYNC
-
-bool mqttFormatFP(const char * fingerprint, unsigned char * bytearray) {
-
-    // check length (20 2-character digits ':' or ' ' separated => 20*2+19 = 59)
-    if (strlen(fingerprint) != 59) return false;
-
-    DEBUG_MSG_P(PSTR("[MQTT] Fingerprint %s\n"), fingerprint);
-
-    // walk the fingerprint
-    for (unsigned int i=0; i<20; i++) {
-        bytearray[i] = strtol(fingerprint + 3*i, NULL, 16);
-    }
-
-    return true;
-
-}
-
-#else
-
-bool mqttFormatFP(const char * fingerprint, char * destination) {
-
-    // check length (20 2-character digits ':' or ' ' separated => 20*2+19 = 59)
-    if (strlen(fingerprint) != 59) return false;
-
-    DEBUG_MSG_P(PSTR("[MQTT] Fingerprint %s\n"), fingerprint);
-
-    // copy it
-    strncpy(destination, fingerprint, 59);
-
-    // walk the fingerprint replacing ':' for ' '
-    for (unsigned char i = 0; i<59; i++) {
-        if (destination[i] == ':') destination[i] = ' ';
-    }
-
-    return true;
-
-}
-
-#endif
-
 void mqttEnabled(bool status) {
     _mqtt_enabled = status;
     setSetting("mqttEnabled", status ? 1 : 0);
@@ -385,17 +354,21 @@ void mqttConnect() {
     if (_mqtt_user) free(_mqtt_user);
     if (_mqtt_pass) free(_mqtt_pass);
     if (_mqtt_will) free(_mqtt_will);
+    if (_mqtt_clientid) free(_mqtt_clientid);
 
     _mqtt_user = strdup(getSetting("mqttUser", MQTT_USER).c_str());
     _mqtt_pass = strdup(getSetting("mqttPassword", MQTT_PASS).c_str());
     _mqtt_will = strdup((_mqtt_topic + MQTT_TOPIC_STATUS).c_str());
+    _mqtt_clientid = strdup(getSetting("mqttClientID", getIdentifier()).c_str());
 
     DEBUG_MSG_P(PSTR("[MQTT] Connecting to broker at %s:%d\n"), host, port);
 
     #if MQTT_USE_ASYNC
 
         _mqtt.setServer(host, port);
-        _mqtt.setKeepAlive(_mqtt_keepalive).setCleanSession(false);
+        _mqtt.setClientId(_mqtt_clientid);
+        _mqtt.setKeepAlive(_mqtt_keepalive);
+        _mqtt.setCleanSession(false);
         _mqtt.setWill(_mqtt_will, _mqtt_qos, _mqtt_retain, "0");
         if ((strlen(_mqtt_user) > 0) && (strlen(_mqtt_pass) > 0)) {
             DEBUG_MSG_P(PSTR("[MQTT] Connecting as user %s\n"), _mqtt_user);
@@ -409,7 +382,7 @@ void mqttConnect() {
             if (secure) {
                 DEBUG_MSG_P(PSTR("[MQTT] Using SSL\n"));
                 unsigned char fp[20] = {0};
-                if (mqttFormatFP(getSetting("mqttFP", MQTT_SSL_FINGERPRINT).c_str(), fp)) {
+                if (sslFingerPrintArray(getSetting("mqttFP", MQTT_SSL_FINGERPRINT).c_str(), fp)) {
                     _mqtt.addServerFingerprint(fp);
                 } else {
                     DEBUG_MSG_P(PSTR("[MQTT] Wrong fingerprint\n"));
@@ -418,9 +391,10 @@ void mqttConnect() {
 
         #endif // ASYNC_TCP_SSL_ENABLED
 
-        DEBUG_MSG_P(PSTR("[MQTT] Will topic: %s\n"), _mqtt_will);
+        DEBUG_MSG_P(PSTR("[MQTT] Client ID: %s\n"), _mqtt_clientid);
         DEBUG_MSG_P(PSTR("[MQTT] QoS: %d\n"), _mqtt_qos);
         DEBUG_MSG_P(PSTR("[MQTT] Retain flag: %d\n"), _mqtt_retain ? 1 : 0);
+        DEBUG_MSG_P(PSTR("[MQTT] Will topic: %s\n"), _mqtt_will);
 
         _mqtt.connect();
 
@@ -435,7 +409,7 @@ void mqttConnect() {
                 DEBUG_MSG_P(PSTR("[MQTT] Using SSL\n"));
                 if (_mqtt_client_secure.connect(host, port)) {
                     char fp[60] = {0};
-                    if (mqttFormatFP(getSetting("mqttFP", MQTT_SSL_FINGERPRINT).c_str(), fp)) {
+                    if (sslFingerPrintChar(getSetting("mqttFP", MQTT_SSL_FINGERPRINT).c_str(), fp)) {
                         if (_mqtt_client_secure.verify(fp, host)) {
                             _mqtt.setClient(_mqtt_client_secure);
                         } else {
@@ -469,14 +443,15 @@ void mqttConnect() {
 
             if ((strlen(_mqtt_user) > 0) && (strlen(_mqtt_pass) > 0)) {
                 DEBUG_MSG_P(PSTR("[MQTT] Connecting as user %s\n"), _mqtt_user);
-                response = _mqtt.connect(getIdentifier().c_str(), _mqtt_user, _mqtt_pass, _mqtt_will, _mqtt_qos, _mqtt_retain, "0");
+                response = _mqtt.connect(_mqtt_clientid, _mqtt_user, _mqtt_pass, _mqtt_will, _mqtt_qos, _mqtt_retain, "0");
             } else {
-				response = _mqtt.connect(getIdentifier().c_str(), _mqtt_will, _mqtt_qos, _mqtt_retain, "0");
+				response = _mqtt.connect(_mqtt_clientid, _mqtt_will, _mqtt_qos, _mqtt_retain, "0");
             }
 
-            DEBUG_MSG_P(PSTR("[MQTT] Will topic: %s\n"), _mqtt_will);
+            DEBUG_MSG_P(PSTR("[MQTT] Client ID: %s\n"), _mqtt_clientid);
             DEBUG_MSG_P(PSTR("[MQTT] QoS: %d\n"), _mqtt_qos);
             DEBUG_MSG_P(PSTR("[MQTT] Retain flag: %d\n"), _mqtt_retain ? 1 : 0);
+            DEBUG_MSG_P(PSTR("[MQTT] Will topic: %s\n"), _mqtt_will);
 
         }
 
@@ -533,8 +508,10 @@ void mqttSetBrokerIfNone(IPAddress ip, unsigned int port) {
 
 void mqttSetup() {
 
-    DEBUG_MSG_P(PSTR("[MQTT] MQTT_USE_ASYNC = %d\n"), MQTT_USE_ASYNC);
-    DEBUG_MSG_P(PSTR("[MQTT] MQTT_AUTOCONNECT = %d\n"), MQTT_AUTOCONNECT);
+    DEBUG_MSG_P(PSTR("[MQTT] Async %s, Autoconnect %s\n"),
+        MQTT_USE_ASYNC ? "ENABLED" : "DISABLED",
+        MQTT_AUTOCONNECT ? "ENABLED" : "DISABLED"
+    );
 
     #if MQTT_USE_ASYNC
 
@@ -576,8 +553,6 @@ void mqttSetup() {
 
     #else // not MQTT_USE_ASYNC
 
-        DEBUG_MSG_P(PSTR("[MQTT] Using SYNC MQTT library\n"));
-
         _mqtt.setCallback([](char* topic, byte* payload, unsigned int length) {
             _mqttOnMessage(topic, (char *) payload, length);
         });
@@ -589,6 +564,7 @@ void mqttSetup() {
 
     #if WEB_SUPPORT
         wsOnSendRegister(_mqttWebSocketOnSend);
+        wsOnAfterParseRegister(_mqttConfigure);
     #endif
 
 }

code/espurna/netbios.ino

@@ -2,7 +2,7 @@
 
 NETBIOS MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/nofuss.ino

@@ -2,7 +2,7 @@
 
 NOFUSS MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/ntp.ino

@@ -2,7 +2,7 @@
 
 NTP MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/ota.ino

@@ -2,7 +2,7 @@
 
 OTA MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -15,7 +15,9 @@ Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
 void _otaConfigure() {
     ArduinoOTA.setPort(OTA_PORT);
     ArduinoOTA.setHostname(getSetting("hostname").c_str());
-    ArduinoOTA.setPassword(getSetting("adminPass", ADMIN_PASS).c_str());
+    #if USE_PASSWORD
+        ArduinoOTA.setPassword(getSetting("adminPass", ADMIN_PASS).c_str());
+    #endif
 }
 
 // -----------------------------------------------------------------------------

code/espurna/relay.ino

@@ -2,7 +2,7 @@
 
 RELAY MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -345,7 +345,7 @@ void _relayBoot() {
             case RELAY_BOOT_SAME:
                 status = ((mask & bit) == bit);
                 break;
-            case RELAY_BOOT_TOOGLE:
+            case RELAY_BOOT_TOGGLE:
                 status = ((mask & bit) != bit);
                 mask ^= bit;
                 trigger_save = true;
@@ -364,7 +364,7 @@ void _relayBoot() {
         bit <<= 1;
     }
 
-    // Save if there is any relay in the RELAY_BOOT_TOOGLE mode
+    // Save if there is any relay in the RELAY_BOOT_TOGGLE mode
     if (trigger_save) {
         EEPROM.write(EEPROM_RELAY_STATUS, mask);
         EEPROM.commit();
@@ -747,6 +747,11 @@ void relayLoop(void) {
                 relayInfluxDB(id);
             #endif
 
+            #if THINGSPEAK_SUPPORT
+                tspkEnqueueRelay(id, status);
+                tspkFlush();
+            #endif
+
             // Flag relay-based LEDs to update status
             ledUpdate(true);
 

code/espurna/rf.ino

@@ -2,7 +2,7 @@
 
 RF MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 

code/espurna/rfbridge.ino

@@ -2,7 +2,7 @@
 
 ITEAD RF BRIDGE MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -252,11 +252,14 @@ void _rfbReceive() {
         //DEBUG_MSG_P(PSTR("[RFBRIDGE] Received 0x%02X\n"), c);
 
         if (receiving) {
-            if (c == RF_CODE_STOP) {
+            if (c == RF_CODE_STOP && (_uartpos == 1 || _uartpos == 10)) {
                 _rfbDecode();
                 receiving = false;
-            } else {
+            } else if (_uartpos < 10) {
                 _uartbuf[_uartpos++] = c;
+            } else {
+                // wrong message, should have received a RF_CODE_STOP
+                receiving = false;
             }
         } else if (c == RF_CODE_START) {
             _uartpos = 0;

code/espurna/sensor.ino

@@ -2,7 +2,7 @@
 
 SENSOR MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -203,6 +203,19 @@ void _sensorPost() {
 
 void _sensorInit() {
 
+    /*
+
+    This is temporal, in the future sensors will be initialized based on
+    soft configuration (data stored in EEPROM config) so you will be able
+    to define and configure new sensors on the fly
+
+    At the time being, only enabled sensors (those with *_SUPPORT to 1) are being
+    loaded and initialized here. If you want to add new sensors of the same type
+    just duplicate the block and change the arguments for the set* methods.
+    Check the DHT block below for an example
+
+     */
+
     #if ANALOG_SUPPORT
     {
         AnalogSensor * sensor = new AnalogSensor();
@@ -244,6 +257,19 @@ void _sensorInit() {
     }
     #endif
 
+    /*
+    // Example on how to add a second DHT sensor
+    // DHT2_PIN and DHT2_TYPE should be defined in sensors.h file
+    #if DHT_SUPPORT
+    {
+        DHTSensor * sensor = new DHTSensor();
+        sensor->setGPIO(DHT2_PIN);
+        sensor->setType(DHT2_TYPE);
+        _sensors.push_back(sensor);
+    }
+    #endif
+    */
+
     #if DIGITAL_SUPPORT
     {
         DigitalSensor * sensor = new DigitalSensor();
@@ -634,11 +660,23 @@ void sensorLoop() {
                         dtostrf(filtered, 1-sizeof(buffer), decimals, buffer);
 
                         #if MQTT_SUPPORT
+
                             if (SENSOR_USE_INDEX || (_counts[magnitude.type] > 1)) {
                                 mqttSend(_magnitudeTopic(magnitude.type).c_str(), magnitude.global, buffer);
                             } else {
                                 mqttSend(_magnitudeTopic(magnitude.type).c_str(), buffer);
                             }
+
+                            #if SENSOR_PUBLISH_ADDRESSES
+                                char topic[32];
+                                snprintf(topic, sizeof(topic), "%s/%s", SENSOR_ADDRESS_TOPIC, _magnitudeTopic(magnitude.type).c_str());
+                                if (SENSOR_USE_INDEX || (_counts[magnitude.type] > 1)) {
+                                    mqttSend(topic, magnitude.global, magnitude.sensor->address(magnitude.local).c_str());
+                                } else {
+                                    mqttSend(topic, magnitude.sensor->address(magnitude.local).c_str());
+                                }
+                            #endif // SENSOR_PUBLISH_ADDRESSES
+
                         #endif // MQTT_SUPPORT
 
                         #if INFLUXDB_SUPPORT
@@ -649,6 +687,10 @@ void sensorLoop() {
                             }
                         #endif // INFLUXDB_SUPPORT
 
+                        #if THINGSPEAK_SUPPORT
+                            tspkEnqueueMeasurement(i, buffer);
+                        #endif
+
                         #if DOMOTICZ_SUPPORT
                         {
                             char key[15];
@@ -685,6 +727,10 @@ void sensorLoop() {
             wsSend(_sensorWebSocketSendData);
         #endif
 
+        #if THINGSPEAK_SUPPORT
+            if (report_count == 0) tspkFlush();
+        #endif
+
     }
 
 }

code/espurna/sensors/AnalogSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Analog Sensor (maps to an analogRead)
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && ANALOG_SUPPORT
@@ -37,6 +37,16 @@ class AnalogSensor : public BaseSensor {
             return String("ANALOG @ GPIO0");
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            return String("0");
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/BH1750Sensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // BH1750 Liminosity sensor over I2C
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && BH1750_SUPPORT

code/espurna/sensors/BMX280Sensor.h

@@ -1,7 +1,7 @@
 // -----------------------------------------------------------------------------
 // BME280/BMP280 Sensor over I2C
 // Uses SparkFun BME280 library
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && BMX280_SUPPORT
@@ -150,7 +150,7 @@ class BMX280Sensor : public I2CSensor {
 
         void getConfig(JsonObject& root) {
             root["sensor_id"] = _sensor_id;
-            root["address"] = getAddress();
+            root["address"] = _address;
         };
 
         void setConfig(JsonObject& root) {

code/espurna/sensors/BaseSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Abstract sensor class (other sensor classes extend this class)
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT
@@ -46,6 +46,12 @@ class BaseSensor {
         // Descriptive name of the sensor
         virtual String description() {}
 
+        // Address of the sensor (it could be the GPIO or I2C address)
+        virtual String address(unsigned char index) {}
+
+        // Descriptive name of the slot # index
+        virtual String slot(unsigned char index) {};
+
         // Type for slot # index
         virtual unsigned char type(unsigned char index) {}
 
@@ -61,9 +67,6 @@ class BaseSensor {
         // Load the configuration manifest
         static void manifest(JsonArray& root) {};
 
-        // Descriptive name of the slot # index
-        String slot(unsigned char index) { return description(); }
-
         // Sensor ID
         unsigned char getID() { return _sensor_id; };
 

code/espurna/sensors/DHTSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // DHTXX Sensor
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && DHT_SUPPORT
@@ -90,6 +90,16 @@ class DHTSensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            return String(_gpio);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;
@@ -137,7 +147,11 @@ class DHTSensor : public BaseSensor {
             pinMode(_gpio, OUTPUT);
             noInterrupts();
         	digitalWrite(_gpio, LOW);
-            delayMicroseconds(_type == DHT_CHIP_DHT11 ? 20000 : 500);
+            if (_type == DHT_CHIP_DHT11) {
+                delay(20);
+            } else {
+                delayMicroseconds(500);
+            }
             digitalWrite(_gpio, HIGH);
             delayMicroseconds(40);
             pinMode(_gpio, INPUT_PULLUP);

code/espurna/sensors/DallasSensor.h

@@ -1,7 +1,7 @@
 // -----------------------------------------------------------------------------
 // Dallas OneWire Sensor
 // Uses OneWire library
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && DALLAS_SUPPORT
@@ -170,6 +170,19 @@ class DallasSensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Address of the device
+        String address(unsigned char index) {
+            char buffer[20] = {0};
+            if (index < _count) {
+                uint8_t * address = _devices[index].address;
+                snprintf(buffer, sizeof(buffer), "%02X%02X%02X%02X%02X%02X%02X%02X",
+                    address[0], address[1], address[2], address[3],
+                    address[4], address[5], address[6], address[7]
+                );
+            }
+            return String(buffer);
+        }
+
         // Descriptive name of the slot # index
         String slot(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/DigitalSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Digital Sensor (maps to a digitalRead)
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && DIGITAL_SUPPORT
@@ -67,6 +67,16 @@ class DigitalSensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            return String(_gpio);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/ECH1560Sensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // ECH1560 based power monitor
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && ECH1560_SUPPORT
@@ -82,6 +82,18 @@ class ECH1560Sensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            char buffer[6];
+            snprintf(buffer, sizeof(buffer), "%i:%i", _clk, _miso);
+            return String(buffer);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/EmonADC121Sensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // ADS121-based Energy Monitor Sensor over I2C
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && EMON_ADC121_SUPPORT

code/espurna/sensors/EmonADS1X15Sensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // ADS1X15-based Energy Monitor Sensor over I2C
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && EMON_ADS1X15_SUPPORT
@@ -203,6 +203,14 @@ class EmonADS1X15Sensor : public EmonSensor {
             return String(buffer);
         }
 
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            char buffer[10];
+            unsigned char channel = getChannel(index % _ports);
+            snprintf(buffer, sizeof(buffer), "0x%02X:%i", _address, channel);
+            return String(buffer);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             if (index < _count) {

code/espurna/sensors/EmonAnalogSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Energy Monitor Sensor using builtin ADC
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && EMON_ANALOG_SUPPORT
@@ -59,6 +59,11 @@ class EmonAnalogSensor : public EmonSensor {
             return String("EMON @ ANALOG @ GPIO0");
         }
 
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            return String("0");
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/EmonSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Abstract Energy Monitor Sensor (other EMON sensors extend this class)
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT

code/espurna/sensors/EventSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Event Counter Sensor
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && EVENTS_SUPPORT
@@ -81,6 +81,16 @@ class EventSensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            return String(_gpio);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/HLW8012Sensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Event Counter Sensor
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && HLW8012_SUPPORT
@@ -162,6 +162,18 @@ class HLW8012Sensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            char buffer[10];
+            snprintf(buffer, sizeof(buffer), "%i:%i:%i", _sel, _cf, _cf1);
+            return String(buffer);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/I2CSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // Abstract I2C sensor class (other sensor classes extend this class)
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && ( I2C_SUPPORT || EMON_ANALOG_SUPPORT )
@@ -23,6 +23,18 @@ class I2CSensor : public BaseSensor {
             return _address;
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            char buffer[5];
+            snprintf(buffer, sizeof(buffer), "0x%02X", _address);
+            return String(buffer);
+        }
+
     protected:
 
         // Specific for I2C sensors

code/espurna/sensors/MHZ19Sensor.h

@@ -3,7 +3,7 @@
 // Based on: https://github.com/nara256/mhz19_uart
 // http://www.winsen-sensor.com/d/files/infrared-gas-sensor/mh-z19b-co2-ver1_0.pdf
 // Uses SoftwareSerial library
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && MHZ19_SUPPORT
@@ -89,6 +89,18 @@ class MHZ19Sensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            char buffer[6];
+            snprintf(buffer, sizeof(buffer), "%i:%i", _pin_rx, _pin_tx);
+            return String(buffer);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             _error = SENSOR_ERROR_OK;

code/espurna/sensors/PMSX003Sensor.h

@@ -97,6 +97,13 @@ class PMSX003Sensor : public BaseSensor {
             return String();
         }
 
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            char buffer[6];
+            snprintf(buffer, sizeof(buffer), "%i:%i", _pin_rx, _pin_tx);
+            return String(buffer);
+        }
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             if (index < _count) {

code/espurna/sensors/SHT3XI2CSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // SHT3X Sensor over I2C (Wemos)
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && SHT3X_I2C_SUPPORT

code/espurna/sensors/SI7021Sensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // SI7021 / HTU21D Sensor over I2C
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && SI7021_SUPPORT
@@ -85,6 +85,11 @@ class SI7021Sensor : public I2CSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
         // Type for slot # index
         unsigned char type(unsigned char index) {
             if (index < _count) {

code/espurna/sensors/V9261FSensor.h

@@ -1,6 +1,6 @@
 // -----------------------------------------------------------------------------
 // V9261F based power monitor
-// Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 // -----------------------------------------------------------------------------
 
 #if SENSOR_SUPPORT && V9261F_SUPPORT
@@ -77,6 +77,16 @@ class V9261FSensor : public BaseSensor {
             return String(buffer);
         }
 
+        // Descriptive name of the slot # index
+        String slot(unsigned char index) {
+            return description();
+        };
+
+        // Address of the sensor (it could be the GPIO or I2C address)
+        String address(unsigned char index) {
+            return String(_pin_rx);
+        }
+
         // Loop-like method, call it in your main loop
         void tick() {
             _read();

code/espurna/settings.ino

@@ -2,7 +2,7 @@
 
 SETTINGS MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -250,6 +250,24 @@ void settingsSetup() {
         DEBUG_MSG_P(PSTR("+OK\n"));
     });
 
+    Embedis::command( F("GPIO"), [](Embedis* e) {
+        if (e->argc < 2) {
+            DEBUG_MSG_P(PSTR("-ERROR: Wrong arguments\n"));
+            return;
+        }
+        int pin = String(e->argv[1]).toInt();
+        //if (!gpioValid(pin)) {
+        //    DEBUG_MSG_P(PSTR("-ERROR: Invalid GPIO\n"));
+        //    return;
+        //}
+        if (e->argc > 2) {
+            bool state = String(e->argv[2]).toInt() == 1;
+            digitalWrite(pin, state);
+        }
+        DEBUG_MSG_P(PSTR("GPIO %d is %s\n"), pin, digitalRead(pin) == HIGH ? "HIGH" : "LOW");
+        DEBUG_MSG_P(PSTR("+OK\n"));
+    });
+
     Embedis::command( F("HEAP"), [](Embedis* e) {
         DEBUG_MSG_P(PSTR("Free HEAP: %d bytes\n"), getFreeHeap());
         DEBUG_MSG_P(PSTR("+OK\n"));

code/espurna/ssdp.ino

@@ -2,7 +2,7 @@
 
 SSDP MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 Uses SSDP library by PawelDino (https://github.com/PawelDino)
 https://github.com/esp8266/Arduino/issues/2283#issuecomment-299635604
 

code/espurna/telnet.ino

@@ -2,7 +2,7 @@
 
 TELNET MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 Parts of the code have been borrowed from Thomas Sarlandie's NetServer
 (https://github.com/sarfata/kbox-firmware/tree/master/src/esp)
 

code/espurna/thinkspeak.ino

@@ -0,0 +1,265 @@
+/*
+
+THINGSPEAK MODULE
+
+Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
+
+*/
+
+#if THINGSPEAK_SUPPORT
+
+#if THINGSPEAK_USE_ASYNC
+#include <ESPAsyncTCP.h>
+AsyncClient * _tspk_client;
+#else
+#include <ESP8266WiFi.h>
+#endif
+
+const char THINGSPEAK_REQUEST_TEMPLATE[] PROGMEM =
+    "POST %s HTTP/1.1\r\n"
+    "Host: %s\r\n"
+    "User-Agent: ESPurna\r\n"
+    "Connection: close\r\n"
+    "Content-Type: application/x-www-form-urlencoded\r\n"
+    "Content-Length: %d\r\n\r\n"
+    "%s\r\n";
+
+bool _tspk_enabled = false;
+char * _tspk_queue[8] = {NULL};
+
+bool _tspk_flush = false;
+unsigned long _tspk_last_flush = 0;
+
+// -----------------------------------------------------------------------------
+
+void _tspkWebSocketOnSend(JsonObject& root) {
+
+    unsigned char visible = 0;
+
+    root["tspkEnabled"] = getSetting("tspkEnabled", THINGSPEAK_ENABLED).toInt() == 1;
+    root["tspkKey"] = getSetting("tspkKey");
+
+    JsonArray& relays = root.createNestedArray("tspkRelays");
+    for (byte i=0; i<relayCount(); i++) {
+        relays.add(getSetting("tspkRelay", i, 0).toInt());
+    }
+    if (relayCount() > 0) visible = 1;
+
+    #if SENSOR_SUPPORT
+        JsonArray& list = root.createNestedArray("tspkMagnitudes");
+        for (byte i=0; i<magnitudeCount(); i++) {
+            JsonObject& element = list.createNestedObject();
+            element["name"] = magnitudeName(i);
+            element["type"] = magnitudeType(i);
+            element["index"] = magnitudeIndex(i);
+            element["idx"] = getSetting("tspkMagnitude", i, 0).toInt();
+        }
+        if (magnitudeCount() > 0) visible = 1;
+    #endif
+
+    root["tspkVisible"] = visible;
+
+}
+
+void _tspkConfigure() {
+    _tspk_enabled = getSetting("tspkEnabled", THINGSPEAK_ENABLED).toInt() == 1;
+    if (_tspk_enabled && (getSetting("tspkKey").length() == 0)) {
+        _tspk_enabled = false;
+        setSetting("tspkEnabled", 0);
+    }
+}
+
+#if THINGSPEAK_USE_ASYNC
+
+void _tspkPost(String data) {
+
+    if (_tspk_client == NULL) {
+        _tspk_client = new AsyncClient();
+    }
+
+    _tspk_client->onDisconnect([](void *s, AsyncClient *c) {
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] Disconnected\n"));
+        _tspk_client->free();
+        delete _tspk_client;
+        _tspk_client = NULL;
+    }, 0);
+
+    _tspk_client->onTimeout([](void *s, AsyncClient *c, uint32_t time) {
+        _tspk_client->close(true);
+    }, 0);
+
+    _tspk_client->onData([](void * arg, AsyncClient * c, void * response, size_t len) {
+        char * b = (char *) response;
+        b[len] = 0;
+        char * p = strstr((char *)response, "\r\n\r\n");
+        unsigned int code = (p != NULL) ? atoi(&p[4]) : 0;
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] Response value: %d\n"), code);
+        _tspk_client->close(true);
+    }, NULL);
+
+    _tspk_client->onConnect([data](void * arg, AsyncClient * client) {
+
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] Connected to %s:%d\n"), THINGSPEAK_HOST, THINGSPEAK_PORT);
+
+        #if THINGSPEAK_USE_SSL
+            uint8_t fp[20] = {0};
+            sslFingerPrintArray(THINGSPEAK_FINGERPRINT, fp);
+            SSL * ssl = _tspk_client->getSSL();
+            if (ssl_match_fingerprint(ssl, fp) != SSL_OK) {
+                DEBUG_MSG_P(PSTR("[THINGSPEAK] Warning: certificate doesn't match\n"));
+            }
+        #endif
+
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] POST %s\n"), data.c_str());
+
+        char buffer[strlen_P(THINGSPEAK_REQUEST_TEMPLATE) + strlen(THINGSPEAK_URL) + strlen(THINGSPEAK_HOST) + data.length()];
+        snprintf_P(buffer, sizeof(buffer),
+            THINGSPEAK_REQUEST_TEMPLATE,
+            THINGSPEAK_URL,
+            THINGSPEAK_HOST,
+            data.length(),
+            data.c_str()
+        );
+
+        client->write(buffer);
+
+    }, NULL);
+
+    #if ASYNC_TCP_SSL_ENABLED
+        bool connected = _tspk_client->connect(THINGSPEAK_HOST, THINGSPEAK_PORT, THINGSPEAK_USE_SSL);
+    #else
+        bool connected = _tspk_client->connect(THINGSPEAK_HOST, THINGSPEAK_PORT);
+    #endif
+
+    if (!connected) {
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] Connection failed\n"));
+        _tspk_client->close(true);
+    }
+
+}
+
+#else // THINGSPEAK_USE_ASYNC
+
+void _tspkPost(String data) {
+
+    #if THINGSPEAK_USE_SSL
+        WiFiClientSecure _tspk_client;
+    #else
+        WiFiClient _tspk_client;
+    #endif
+
+    if (_tspk_client.connect(THINGSPEAK_HOST, THINGSPEAK_PORT)) {
+
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] Connected to %s:%d\n"), THINGSPEAK_HOST, THINGSPEAK_PORT);
+
+        if (!_tspk_client.verify(THINGSPEAK_FINGERPRINT, THINGSPEAK_HOST)) {
+            DEBUG_MSG_P(PSTR("[THINGSPEAK] Warning: certificate doesn't match\n"));
+        }
+
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] POST %s\n"), data.c_str());
+        char buffer[strlen_P(THINGSPEAK_REQUEST_TEMPLATE) + strlen(THINGSPEAK_URL) + strlen(THINGSPEAK_HOST) + data.length()];
+        snprintf_P(buffer, sizeof(buffer),
+            THINGSPEAK_REQUEST_TEMPLATE,
+            THINGSPEAK_URL,
+            THINGSPEAK_HOST,
+            data.length(),
+            data.c_str()
+        );
+        _tspk_client.print(buffer);
+
+        nice_delay(100);
+
+        String response = _tspk_client.readString();
+        int pos = response.indexOf("\r\n\r\n");
+        unsigned int code = (pos > 0) ? response.substring(pos + 4).toInt() : 0;
+        DEBUG_MSG_P(PSTR("[THINGSPEAK] Response value: %d\n"), code);
+        _tspk_client.stop();
+        return;
+
+    }
+
+    DEBUG_MSG_P(PSTR("[THINGSPEAK] Connection failed\n"));
+
+}
+
+#endif // THINGSPEAK_USE_ASYNC
+
+bool _tspkEnqueue(unsigned char index, char * payload) {
+    DEBUG_MSG_P(PSTR("[THINGSPEAK] Enqueuing field #%d with value %s\n"), index, payload);
+    --index;
+    if (_tspk_queue[index] != NULL) free(_tspk_queue[index]);
+    _tspk_queue[index] = strdup(payload);
+}
+
+void _tspkFlush() {
+
+    String data;
+
+    // Walk the fields
+    for (unsigned char id=0; id<8; id++) {
+        if (_tspk_queue[id] != NULL) {
+            if (data.length() > 0) data = data + String("&");
+            data = data + String("field") + String(id+1) + String("=") + String(_tspk_queue[id]);
+            free(_tspk_queue[id]);
+            _tspk_queue[id] = NULL;
+        }
+    }
+
+    // POST data if any
+    if (data.length() > 0) {
+        data = data + String("&api_key=") + getSetting("tspkKey");
+        _tspkPost(data);
+        _tspk_last_flush = millis();
+    }
+
+}
+// -----------------------------------------------------------------------------
+
+bool tspkEnqueueRelay(unsigned char index, unsigned char status) {
+    if (!_tspk_enabled) return true;
+    unsigned char id = getSetting("tspkRelay", index, 0).toInt();
+    if (id > 0) {
+        char payload[3];
+        itoa(status ? 1 : 0, payload, 10);
+        _tspkEnqueue(id, payload);
+    }
+}
+
+bool tspkEnqueueMeasurement(unsigned char index, char * payload) {
+    if (!_tspk_enabled) return true;
+    unsigned char id = getSetting("tspkMagnitude", index, 0).toInt();
+    if (id > 0) {
+        _tspkEnqueue(id, payload);
+    }
+}
+
+void tspkFlush() {
+    _tspk_flush = true;
+}
+
+bool tspkEnabled() {
+    return _tspk_enabled;
+}
+
+void tspkSetup() {
+    _tspkConfigure();
+    #if WEB_SUPPORT
+        wsOnSendRegister(_tspkWebSocketOnSend);
+        wsOnAfterParseRegister(_tspkConfigure);
+    #endif
+    DEBUG_MSG_P(PSTR("[THINGSPEAK] Async %s, SSL %s\n"),
+        THINGSPEAK_USE_ASYNC ? "ENABLED" : "DISABLED",
+        THINGSPEAK_USE_SSL ? "ENABLED" : "DISABLED"
+    );
+}
+
+void tspkLoop() {
+    if (!_tspk_enabled) return;
+    if (!wifiConnected() || (WiFi.getMode() != WIFI_STA)) return;
+    if (_tspk_flush && (millis() - _tspk_last_flush > THINGSPEAK_MIN_INTERVAL)) {
+        _tspkFlush();
+        _tspk_flush = false;
+    }
+}
+
+#endif

code/espurna/utils.ino

@@ -2,7 +2,7 @@
 
 UTILS MODULE
 
-Copyright (C) 2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -15,6 +15,16 @@ String getIdentifier() {
     return String(buffer);
 }
 
+void setBoardName() {
+    #ifndef ESPURNA_CORE
+        setSetting("boardName", DEVICE_NAME);
+    #endif
+}
+
+String getBoardName() {
+    return getSetting("boardName", DEVICE_NAME);
+}
+
 String getCoreVersion() {
     String version = ESP.getCoreVersion();
     #ifdef ARDUINO_ESP8266_RELEASE
@@ -191,6 +201,51 @@ void heartbeat() {
 
 }
 
+// -----------------------------------------------------------------------------
+// SSL
+// -----------------------------------------------------------------------------
+
+#if ASYNC_TCP_SSL_ENABLED
+
+bool sslCheckFingerPrint(const char * fingerprint) {
+    return (strlen(fingerprint) == 59);
+}
+
+bool sslFingerPrintArray(const char * fingerprint, unsigned char * bytearray) {
+
+    // check length (20 2-character digits ':' or ' ' separated => 20*2+19 = 59)
+    if (!sslCheckFingerPrint(fingerprint)) return false;
+
+    // walk the fingerprint
+    for (unsigned int i=0; i<20; i++) {
+        bytearray[i] = strtol(fingerprint + 3*i, NULL, 16);
+    }
+
+    return true;
+
+}
+
+bool sslFingerPrintChar(const char * fingerprint, char * destination) {
+
+    // check length (20 2-character digits ':' or ' ' separated => 20*2+19 = 59)
+    if (!sslCheckFingerPrint(fingerprint)) return false;
+
+    // copy it
+    strncpy(destination, fingerprint, 59);
+
+    // walk the fingerprint replacing ':' for ' '
+    for (unsigned char i = 0; i<59; i++) {
+        if (destination[i] == ':') destination[i] = ' ';
+    }
+
+    return true;
+
+}
+
+#endif
+
+// -----------------------------------------------------------------------------
+// Reset
 // -----------------------------------------------------------------------------
 
 unsigned char resetReason() {

code/espurna/web.ino

@@ -2,7 +2,7 @@
 
 WEBSERVER MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -267,10 +267,14 @@ void _onUpgradeData(AsyncWebServerRequest *request, String filename, size_t inde
 // -----------------------------------------------------------------------------
 
 bool _authenticate(AsyncWebServerRequest *request) {
-    String password = getSetting("adminPass", ADMIN_PASS);
-    char httpPassword[password.length() + 1];
-    password.toCharArray(httpPassword, password.length() + 1);
-    return request->authenticate(WEB_USERNAME, httpPassword);
+    #if USE_PASSWORD
+        String password = getSetting("adminPass", ADMIN_PASS);
+        char httpPassword[password.length() + 1];
+        password.toCharArray(httpPassword, password.length() + 1);
+        return request->authenticate(WEB_USERNAME, httpPassword);
+    #else
+        return true;
+    #endif
 }
 
 // -----------------------------------------------------------------------------

code/espurna/wifi.ino

@@ -2,7 +2,7 @@
 
 WIFI MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -73,7 +73,11 @@ void wifiReconnectCheck() {
 void wifiConfigure() {
 
     jw.setHostname(getSetting("hostname").c_str());
-    jw.setSoftAP(getSetting("hostname").c_str(), getSetting("adminPass", ADMIN_PASS).c_str());
+    #if USE_PASSWORD
+        jw.setSoftAP(getSetting("hostname").c_str(), getSetting("adminPass", ADMIN_PASS).c_str());
+    #else
+        jw.setSoftAP(getSetting("hostname").c_str());
+    #endif
     jw.setConnectTimeout(WIFI_CONNECT_TIMEOUT);
     wifiReconnectCheck();
     jw.setAPMode(WIFI_AP_MODE);

code/espurna/ws.ino

@@ -2,7 +2,7 @@
 
 WEBSOCKET MODULE
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 */
 
@@ -205,7 +205,7 @@ void _wsParse(AsyncWebSocketClient *client, uint8_t * payload, size_t length) {
 
 void _wsOnStart(JsonObject& root) {
 
-    #if WEB_FORCE_PASS_CHANGE
+    #if USE_PASSWORD && WEB_FORCE_PASS_CHANGE
         String adminPass = getSetting("adminPass", ADMIN_PASS);
         bool changePassword = adminPass.equals(ADMIN_PASS);
     #else
@@ -350,7 +350,9 @@ void wsSend_P(uint32_t client_id, PGM_P payload) {
 }
 
 void wsConfigure() {
-    _ws.setAuthentication(WEB_USERNAME, (const char *) getSetting("adminPass", ADMIN_PASS).c_str());
+    #if USE_PASSWORD
+        _ws.setAuthentication(WEB_USERNAME, (const char *) getSetting("adminPass", ADMIN_PASS).c_str());
+    #endif
 }
 
 void wsSetup() {

code/extra_scripts.py

@@ -0,0 +1,46 @@
+#!/usr/bin/env python
+import time
+Import("env")
+
+# ------------------------------------------------------------------------------
+# Utils
+# ------------------------------------------------------------------------------
+
+class Color:
+    BLACK = '\x1b[1;30m'
+    RED = '\x1b[1;31m'
+    GREEN = '\x1b[1;32m'
+    YELLOW = '\x1b[1;33m'
+    BLUE = '\x1b[1;34m'
+    MAGENTA = '\x1b[1;35m'
+    CYAN = '\x1b[1;36m'
+    WHITE = '\x1b[1;37m'
+    LIGHT_GREY = '\x1b[0;30m'
+    LIGHT_RED = '\x1b[0;31m'
+    LIGHT_GREEN = '\x1b[0;32m'
+    LIGHT_YELLOW = '\x1b[0;33m'
+    LIGHT_BLUE = '\x1b[0;34m'
+    LIGHT_MAGENTA = '\x1b[0;35m'
+    LIGHT_CYAN = '\x1b[0;36m'
+    LIGHT_WHITE = '\x1b[0;37m'
+
+def clr(color, text):
+    return color + str(text) + '\x1b[0m'
+
+# ------------------------------------------------------------------------------
+# Callbacks
+# ------------------------------------------------------------------------------
+
+def check_size(source, target, env):
+    time.sleep(1)
+    size = target[0].get_size()
+    print clr(Color.LIGHT_BLUE, "Binary size: %s bytes" % size)
+    #if size > 512000:
+    #    print clr(Color.LIGHT_RED, "File too large for OTA!")
+    #    Exit(1)
+
+# ------------------------------------------------------------------------------
+# Hooks
+# ------------------------------------------------------------------------------
+
+env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", check_size)

code/gulpfile.js

@@ -2,7 +2,7 @@
 
 ESP8266 file system builder
 
-Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

code/html/custom.js

@@ -102,7 +102,8 @@ var is_group = [
     "ssid", "pass", "gw", "mask", "ip", "dns",
     "relayBoot", "relayPulse", "relayTime",
     "mqttGroup", "mqttGroupInv",
-    "dczRelayIdx",
+    "dczRelayIdx", "dczMagnitude",
+    "tspkRelay", "tspkMagnitude",
     "ledMode",
     "adminPass"
 ];
@@ -394,36 +395,36 @@ function toggleMenu() {
 }
 
 // -----------------------------------------------------------------------------
-// Domoticz
+// Relays & magnitudes mapping
 // -----------------------------------------------------------------------------
 
-function createRelayIdxs(data) {
+function createRelayList(data, container, template) {
 
-    var current = $("#domoticzRelays > div").length;
+    var current = $("#" + container + " > div").length;
     if (current > 0) return;
 
-    var template = $("#relayIdxTemplate .pure-g")[0];
+    var template = $("#" + template + " .pure-g")[0];
     for (var i=0; i<data.length; i++) {
         var line = $(template).clone();
         $("label", line).html("Switch #" + i);
-        $("input", line).attr("name", "dczRelayIdx" + i).attr("tabindex", 40 + i).val(data[i]);
-        line.appendTo("#domoticzRelays");
+        $("input", line).attr("tabindex", 40 + i).val(data[i]);
+        line.appendTo("#" + container);
     }
 
 }
 
-function createMagnitudeIdxs(data) {
+function createMagnitudeList(data, container, template) {
 
-    var current = $("#domoticzMagnitudes > div").length;
+    var current = $("#" + container + " > div").length;
     if (current > 0) return;
 
-    var template = $("#magnitudeIdxTemplate .pure-g")[0];
+    var template = $("#" + template + " .pure-g")[0];
     for (var i=0; i<data.length; i++) {
         var line = $(template).clone();
         $("label", line).html(magnitudeType(data[i].type) + " #" + parseInt(data[i].index));
         $("div.hint", line).html(data[i].name);
-        $("input", line).attr("name", "dczMagnitude" + i).attr("tabindex", 40 + i).val(data[i].idx);
-        line.appendTo("#domoticzMagnitudes");
+        $("input", line).attr("tabindex", 40 + i).val(data[i].idx);
+        line.appendTo("#" + container);
     }
 
 }
@@ -683,6 +684,8 @@ function rfbSend() {
 
 function processData(data) {
 
+    console.log(data);
+
     // title
     if ("app_name" in data) {
         var title = data.app_name;
@@ -842,14 +845,30 @@ function processData(data) {
         // ---------------------------------------------------------------------
 
         // Domoticz - Relays
-        if (key == "dczRelayIdx") {
-            createRelayIdxs(data[key]);
+        if (key == "dczRelays") {
+            createRelayList(data[key], "dczRelays", "dczRelayTemplate");
             return;
         }
 
         // Domoticz - Magnitudes
         if (key == "dczMagnitudes") {
-            createMagnitudeIdxs(data[key]);
+            createMagnitudeList(data[key], "dczMagnitudes", "dczMagnitudeTemplate");
+            return;
+        }
+
+        // ---------------------------------------------------------------------
+        // Thingspeak
+        // ---------------------------------------------------------------------
+
+        // Thingspeak - Relays
+        if (key == "tspkRelays") {
+            createRelayList(data[key], "tspkRelays", "tspkRelayTemplate");
+            return;
+        }
+
+        // Thingspeak - Magnitudes
+        if (key == "tspkMagnitudes") {
+            createMagnitudeList(data[key], "tspkMagnitudes", "tspkMagnitudeTemplate");
             return;
         }
 

code/html/index.html

@@ -116,6 +116,10 @@
                             <a href="#" class="pure-menu-link" data="panel-idb">INFLUXDB</a>
                         </li>
 
+                        <li class="pure-menu-item module module-tspk">
+                            <a href="#" class="pure-menu-link" data="panel-thingspeak">THINGSPEAK</a>
+                        </li>
+
                         <li class="pure-menu-item module module-rfb">
                             <a href="#" class="pure-menu-link" data="panel-rfb">RFBRIDGE</a>
                         </li>
@@ -133,7 +137,7 @@
                     </div>
 
                     <div class="footer">
-                        &copy; 2016-2017<br />
+                        &copy; 2016-2018<br />
                         Xose Pérez<br/>
                         <a href="http://tinkerman.cat" target="_blank">http://tinkerman.cat</a><br/>
                         <a href="https://bitbucket.org/xoseperez/espurna" target="_blank">ESPurna @ Bitbucket</a><br/>
@@ -399,6 +403,13 @@
                                     <div class="pure-u-1 pure-u-lg-3-4 hint">If enabled color changes will be smoothed.</div>
                                 </div>
 
+                                <div class="pure-g">
+                                    <div class="pure-u-1 pure-u-lg-1-4"><label>MQTT group</label></div>
+                                    <div class="pure-u-1 pure-u-lg-3-4"><input name="mqttGroupColor" class="pure-u-1" tabindex="13" action="reconnect" /></div>
+                                    <div class="pure-u-0 pure-u-lg-1-4"></div>
+                                    <div class="pure-u-1 pure-u-lg-3-4 hint">Sync color between different lights.</div>
+                                </div>
+
                             </fieldset>
                         </div>
                     </div>
@@ -564,9 +575,19 @@
                                     <input class="pure-u-1 pure-u-lg-1-4" name="mqttPassword" type="password" size="20" tabindex="24" placeholder="Leave blank if no pass" autocomplete="false" />
                                 </div>
 
+                                <div class="pure-g">
+                                    <label class="pure-u-1 pure-u-lg-1-4">MQTT Client ID</label>
+                                    <input class="pure-u-1 pure-u-lg-1-4" name="mqttClientID" type="text" size="20" tabindex="25" />
+                                    <div class="pure-u-0 pure-u-lg-1-2"></div>
+                                    <div class="pure-u-0 pure-u-lg-1-4"></div>
+                                    <div class="pure-u-1 pure-u-lg-3-4 hint">
+                                        If left empty the firmware will generate a client ID based on the serial number of the chip.
+                                    </div>
+                                </div>
+
                                 <div class="pure-g">
                                     <label class="pure-u-1 pure-u-lg-1-4">MQTT QoS</label>
-                                    <select class="pure-u-1 pure-u-lg-1-4" name="mqttQoS">
+                                    <select class="pure-u-1 pure-u-lg-1-4" name="mqttQoS" tabindex="26">
                                         <option value="0">0: At most once</option>
                                         <option value="1">1: At least once</option>
                                         <option value="2">2: Exactly once</option>
@@ -575,22 +596,22 @@
 
                                 <div class="pure-g">
                                     <label class="pure-u-1 pure-u-lg-1-4">MQTT Retain</label>
-                                    <div class="pure-u-1 pure-u-lg-1-4"><input type="checkbox" name="mqttRetain" tabindex="25" /></div>
+                                    <div class="pure-u-1 pure-u-lg-1-4"><input type="checkbox" name="mqttRetain" tabindex="27" /></div>
                                 </div>
 
                                 <div class="pure-g">
                                     <label class="pure-u-1 pure-u-lg-1-4">MQTT Keep Alive</label>
-                                    <input class="pure-u-1 pure-u-lg-1-4" type="number" name="mqttKeep" min="10" max="60" tabindex="25" />
+                                    <input class="pure-u-1 pure-u-lg-1-4" type="number" name="mqttKeep" min="10" max="3600" tabindex="28" />
                                 </div>
 
                                 <div class="pure-g module module-mqttssl">
                                     <label class="pure-u-1 pure-u-lg-1-4">Use secure connection (SSL)</label>
-                                    <div class="pure-u-1 pure-u-lg-1-4"><input type="checkbox" name="mqttUseSSL" tabindex="26" /></div>
+                                    <div class="pure-u-1 pure-u-lg-1-4"><input type="checkbox" name="mqttUseSSL" tabindex="29" /></div>
                                 </div>
 
                                 <div class="pure-g module module-mqttssl">
                                     <label class="pure-u-1 pure-u-lg-1-4">SSL Fingerprint</label>
-                                    <input class="pure-u-1 pure-u-lg-3-4" name="mqttFP" type="text" size="59" tabindex="26" />
+                                    <input class="pure-u-1 pure-u-lg-3-4" name="mqttFP" type="text" size="59" tabindex="30" />
                                     <div class="pure-u-0 pure-u-lg-1-4"></div>
                                     <div class="pure-u-1 pure-u-lg-3-4 hint">
                                         This is the fingerprint for the SSL certificate of the server.<br />
@@ -602,7 +623,7 @@
 
                                 <div class="pure-g">
                                     <label class="pure-u-1 pure-u-lg-1-4">MQTT Root Topic</label>
-                                    <input class="pure-u-1 pure-u-lg-3-4" name="mqttTopic" type="text" size="20" tabindex="27" />
+                                    <input class="pure-u-1 pure-u-lg-3-4" name="mqttTopic" type="text" size="20" tabindex="31" />
                                     <div class="pure-u-0 pure-u-lg-1-4"></div>
                                     <div class="pure-u-1 pure-u-lg-3-4 hint">
                                         This is the root topic for this device. A trailing slash will be added if not preset. The {identifier} placeholder will be replaced by the device hostname.<br />
@@ -618,7 +639,7 @@
 
                                 <div class="pure-g">
                                     <div class="pure-u-1 pure-u-lg-1-4"><label>Use JSON payload</label></div>
-                                    <div class="pure-u-1 pure-u-lg-3-4"><input type="checkbox" name="mqttUseJson" tabindex="26" /></div>
+                                    <div class="pure-u-1 pure-u-lg-3-4"><input type="checkbox" name="mqttUseJson" tabindex="32" /></div>
                                     <div class="pure-u-1 pure-u-lg-1-4"></div>
                                     <div class="pure-u-1 pure-u-lg-3-4 hint">
                                         All messages (except the device status) will be included in a JSON payload along with the timestamp and hostname
@@ -721,9 +742,49 @@
                                     <div class="pure-u-1 hint">Set IDX to 0 to disable notifications from that component.</div>
                                 </div>
 
-                                <div id="domoticzRelays"></div>
+                                <div id="dczRelays"></div>
+
+                                <div id="dczMagnitudes"></div>
+
+                            </fieldset>
+                        </div>
+
+                    </div>
+
+                    <div class="panel" id="panel-thingspeak">
+
+                        <div class="header">
+                            <h1>THINGSPEAK</h1>
+                            <h2>
+                                Send your sensors data to Thinkgspeak.
+                            </h2>
+                        </div>
+
+                        <div class="page">
+
+                            <fieldset>
+
+                                <legend>General</legend>
+
+                                <div class="pure-g">
+                                    <div class="pure-u-1 pure-u-lg-1-4"><label>Enable Thingspeak</label></div>
+                                    <div class="pure-u-1 pure-u-lg-1-4"><input type="checkbox" name="tspkEnabled" tabindex="30" /></div>
+                                </div>
+
+                                <div class="pure-g">
+                                    <label class="pure-u-1 pure-u-lg-1-4">Thingspeak API Key</label>
+                                    <input class="pure-u-1 pure-u-lg-3-4" name="tspkKey" type="text" tabindex="31" />
+                                </div>
 
-                                <div id="domoticzMagnitudes"></div>
+                                <legend>Sensors &amp; actuators</legend>
+
+                                <div class="pure-g">
+                                    <div class="pure-u-1 hint">Enter the field number to send each data to, 0 disable notifications from that component.</div>
+                                </div>
+
+                                <div id="tspkRelays"></div>
+
+                                <div id="tspkMagnitudes"></div>
 
                             </fieldset>
                         </div>
@@ -983,7 +1044,7 @@
                     <option value="0">Always OFF</option>
                     <option value="1">Always ON</option>
                     <option value="2">Same as before</option>
-                    <option value="3">Toogle before</option>
+                    <option value="3">Toggle before</option>
                 </select>
             </div>
             <div class="pure-g">
@@ -1011,14 +1072,14 @@
             </div>
         </div>
 
-        <div id="relayIdxTemplate" class="template">
+        <div id="dczRelayTemplate" class="template">
             <div class="pure-g">
                 <label class="pure-u-1 pure-u-lg-1-4">Switch</label>
                 <div class="pure-u-1 pure-u-lg-1-4"><input class="pure-u-23-24 dczRelayIdx" name="dczRelayIdx" type="number" min="0" tabindex="0" data="0" /></div>
             </div>
         </div>
 
-        <div id="magnitudeIdxTemplate" class="template">
+        <div id="dczMagnitudeTemplate" class="template">
             <div class="pure-g">
                 <label class="pure-u-1 pure-u-lg-1-4">Magnitude</label>
                 <div class="pure-u-1 pure-u-lg-1-4"><input class="pure-u-23-24 center" name="dczMagnitude" type="number" min="0" tabindex="0" data="0" /></div>
@@ -1026,6 +1087,21 @@
             </div>
         </div>
 
+        <div id="tspkRelayTemplate" class="template">
+            <div class="pure-g">
+                <label class="pure-u-1 pure-u-lg-1-4">Switch</label>
+                <div class="pure-u-1 pure-u-lg-1-4"><input class="pure-u-23-24" name="tspkRelay" type="number" min="0" max="8" tabindex="0" data="0" /></div>
+            </div>
+        </div>
+
+        <div id="tspkMagnitudeTemplate" class="template">
+            <div class="pure-g">
+                <label class="pure-u-1 pure-u-lg-1-4">Magnitude</label>
+                <div class="pure-u-1 pure-u-lg-1-4"><input class="pure-u-23-24 center" name="tspkMagnitude" type="number" min="0" max="8" tabindex="0" data="0" /></div>
+                <div class="pure-u-1 pure-u-lg-1-2 hint center"></div>
+            </div>
+        </div>
+
         <div id="colorRGBTemplate" class="template">
             <div class="pure-g">
                 <label class="pure-u-1 pure-u-lg-1-4">Color</label>

code/memanalyzer.py

@@ -19,6 +19,7 @@ import shlex
 import commands
 import subprocess
 import sys
+import os
 import re
 import argparse
 
@@ -39,6 +40,12 @@ description = "ESPurna Memory Analyzer v0.1"
 
 #-------------------------------------------------------------------------------
 
+def file_size(file):
+    try:
+        return os.stat(file).st_size
+    except:
+        return 0
+
 def analyse_memory(elf_file):
 
     command = "%s -t '%s' " % (objdump_binary, elf_file)
@@ -107,7 +114,7 @@ try:
 
     # Parse command line options
     parser = argparse.ArgumentParser(description=description)
-    parser.add_argument("modules", nargs='*', help="Modules to test")
+    parser.add_argument("modules", nargs='*', help="Modules to test (use ALL to test them all)")
     parser.add_argument("-c", "--core", help="use core as base configuration instead of default", default=0, action='count')
     parser.add_argument("-l", "--list", help="list available modules", default=0, action='count')
     args = parser.parse_args()
@@ -133,10 +140,12 @@ try:
         sys.exit(0)
 
     # Which modules to test?
+    test_modules = []
     if len(args.modules) > 0:
-        test_modules = args.modules
-    else:
-        test_modules = available_modules.keys()
+        if "ALL" in args.modules:
+            test_modules = available_modules.keys()
+        else:
+            test_modules = args.modules
 
     # Check test modules exist
     for module in test_modules:
@@ -153,20 +162,26 @@ try:
         modules = available_modules
 
     # Show init message
-    print "Analyzing module(s) %s on top of %s configuration\n" % (", ".join(test_modules), "CORE" if args.core > 0 else "DEFAULT")
-    output_format="{:<20}|{:<11}|{:<11}|{:<11}|{:<11}|{:<11}"
+    if len(test_modules) > 0:
+        print "Analyzing module(s) %s on top of %s configuration\n" % (", ".join(test_modules), "CORE" if args.core > 0 else "DEFAULT")
+    else:
+        print "Analyzing %s configuration\n" % ("CORE" if args.core > 0 else "DEFAULT")
+
+    output_format="{:<20}|{:<11}|{:<11}|{:<11}|{:<11}|{:<11}|{:<12}"
     print(output_format.format(
         "Module",
         "Cache IRAM",
         "Init RAM",
         "R.O. RAM",
         "Uninit RAM",
-        "Flash ROM"
+        "Flash ROM",
+        "Binary size"
     ))
 
     # Build the core without modules to get base memory usage
     run(env, modules)
-    base = analyse_memory(".pioenvs/"+env+"/firmware.elf")
+    base = analyse_memory(".pioenvs/%s/firmware.elf" % env)
+    base['size'] = file_size(".pioenvs/%s/firmware.bin" % env)
     print(output_format.format(
         "CORE" if args.core == 1 else "DEFAULT",
         base['text'],
@@ -174,6 +189,7 @@ try:
         base['rodata'],
         base['bss'],
         base['irom0_text'],
+        base['size'],
     ))
 
     # Test each module
@@ -182,7 +198,8 @@ try:
 
         modules[module] = 1
         run(env, modules)
-        results[module]=analyse_memory(".pioenvs/"+env+"/firmware.elf")
+        results[module]=analyse_memory(".pioenvs/%s/firmware.elf" % env)
+        results[module]['size'] = file_size(".pioenvs/%s/firmware.bin" % env)
         modules[module] = 0
 
         print(output_format.format(
@@ -192,33 +209,39 @@ try:
             results[module]['rodata'] - base['rodata'],
             results[module]['bss'] - base['bss'],
             results[module]['irom0_text'] - base['irom0_text'],
+            results[module]['size'] - base['size'],
         ))
 
     # Test all modules
-    for module in test_modules:
-        modules[module] = 1
-    run(env, modules)
-    total = analyse_memory(".pioenvs/"+env+"/firmware.elf")
+    if len(test_modules) > 0:
+
+        for module in test_modules:
+            modules[module] = 1
+        run(env, modules)
+        total = analyse_memory(".pioenvs/%s/firmware.elf" % env)
+        total['size'] = file_size(".pioenvs/%s/firmware.bin" % env)
+
+        if len(test_modules) > 1:
+            print(output_format.format(
+                "ALL MODULES",
+                total['text'] - base['text'],
+                total['data'] - base['data'],
+                total['rodata'] - base['rodata'],
+                total['bss'] - base['bss'],
+                total['irom0_text'] - base['irom0_text'],
+                total['size'] - base['size'],
+            ))
 
-    if len(test_modules) > 1:
         print(output_format.format(
-            "ALL MODULES",
-            total['text'] - base['text'],
-            total['data'] - base['data'],
-            total['rodata'] - base['rodata'],
-            total['bss'] - base['bss'],
-            total['irom0_text'] - base['irom0_text'],
+            "TOTAL",
+            total['text'],
+            total['data'],
+            total['rodata'],
+            total['bss'],
+            total['irom0_text'],
+            total['size'],
         ))
 
-    print(output_format.format(
-        "TOTAL",
-        total['text'],
-        total['data'],
-        total['rodata'],
-        total['bss'],
-        total['irom0_text'],
-    ))
-
 except:
     raise
 

code/ota.py

@@ -0,0 +1,221 @@
+#!/usr/bin/env python
+#-------------------------------------------------------------------------------
+# ESPurna OTA manager
+# xose.perez@gmail.com
+#
+# Requires PlatformIO Core
+#-------------------------------------------------------------------------------
+
+import sys
+import re
+import logging
+import socket
+import argparse
+import subprocess
+from time import sleep
+from zeroconf import ServiceBrowser, ServiceStateChange, Zeroconf
+
+#-------------------------------------------------------------------------------
+
+devices = []
+description = "ESPurna OTA Manager v0.1"
+
+#-------------------------------------------------------------------------------
+
+def on_service_state_change(zeroconf, service_type, name, state_change):
+    '''
+    Callback that adds discovered devices to "devices" list
+    '''
+
+    if state_change is ServiceStateChange.Added:
+        info = zeroconf.get_service_info(service_type, name)
+        if info:
+            hostname = info.server.split(".")[0]
+            device = {
+                'hostname': hostname.upper(),
+                'ip': socket.inet_ntoa(info.address)
+            }
+            device['app'] = info.properties.get('app_name', '')
+            device['version'] = info.properties.get('app_version', '')
+            device['device'] = info.properties.get('target_board', '')
+            if 'mem_size' in info.properties:
+                device['mem_size'] = info.properties.get('mem_size')
+            if 'sdk_size' in info.properties:
+                device['sdk_size'] = info.properties.get('sdk_size')
+            if 'free_space' in info.properties:
+                device['free_space'] = info.properties.get('free_space')
+            devices.append(device)
+
+def list():
+    '''
+    Shows the list of discovered devices
+    '''
+    output_format="{:>3}  {:<25}{:<25}{:<15}{:<15}{:<30}{:<10}{:<10}{:<10}"
+    print(output_format.format(
+        "#",
+        "HOSTNAME",
+        "IP",
+        "APP",
+        "VERSION",
+        "DEVICE",
+        "MEM_SIZE",
+        "SDK_SIZE",
+        "FREE_SPACE"
+    ))
+    print "-" * 146
+
+    index = 0
+    for device in devices:
+        index = index + 1
+        print(output_format.format(
+            index,
+            device.get('hostname', ''),
+            device.get('ip', ''),
+            device.get('app', ''),
+            device.get('version', ''),
+            device.get('device', ''),
+            device.get('mem_size', ''),
+            device.get('sdk_size', ''),
+            device.get('free_space', ''),
+        ))
+
+    print
+
+def get_boards():
+    '''
+    Grabs board types fro hardware.h file
+    '''
+    boards = []
+    for line in open("espurna/config/hardware.h"):
+        m = re.search(r'defined\((\w*)\)', line)
+        if m:
+            boards.append(m.group(1))
+    return sorted(boards)
+
+def flash():
+    '''
+    Grabs info from the user about what device to flash
+    '''
+
+    # Choose the board
+    try:
+        index = int(input("Choose the board you want to flash (empty if none of these): "))
+    except:
+        index = 0
+    if index < 0 or len(devices) < index:
+        print "Board number must be between 1 and %s\n" % str(len(devices))
+        return None
+
+    board = {'board': '', 'ip': '', 'size': 0 , 'auth': '', 'flags': ''}
+
+    if index > 0:
+        device = devices[index-1]
+        board['board'] = device.get('device', '')
+        board['ip'] = device.get('ip', '')
+        board['size'] = int(device.get('mem_size', 0) if device.get('mem_size', 0) == device.get('sdk_size', 0) else 0) / 1024
+
+    # Choose board type if none before
+    if len(board['board']) == 0:
+
+        print
+        count = 1
+        boards = get_boards()
+        for name in boards:
+            print "%3d\t%s" % (count, name)
+            count = count + 1
+        print
+
+        try:
+            index = int(input("Choose the board type you want to flash: "))
+        except:
+            index = 0
+        if index < 1 or len(boards) < index:
+            print "Board number must be between 1 and %s\n" % str(len(boards))
+            return None
+        board['board'] = boards[index-1]
+
+    # Choose board size of none before
+    if board['size'] == 0:
+        try:
+            board['size'] = int(input("Board memory size (1 for 1M, 4 for 4M): "))
+        except:
+            print "Wrong memory size"
+            return None
+
+    # Choose IP of none before
+    if len(board['ip']) == 0:
+        try:
+            board['ip'] = raw_input("IP of the device to flash (empty for 192.168.4.1): ") or "192.168.4.1"
+        except:
+            print "Wrong IP"
+            return None
+
+    board['auth'] = raw_input("Authorization key of the device to flash: ")
+    board['flags'] = raw_input("Extra flags for the build: ")
+
+    return board
+
+def run(device, env):
+    command = "export ESPURNA_IP=\"%s\"; export ESPURNA_BOARD=\"%s\"; export ESPURNA_AUTH=\"%s\"; export ESPURNA_FLAGS=\"%s\"; platformio run --silent --environment %s -t upload"
+    command = command % (device['ip'], device['board'], device['auth'], device['flags'], env)
+    subprocess.check_call(command, shell=True)
+
+#-------------------------------------------------------------------------------
+
+if __name__ == '__main__':
+
+    # Parse command line options
+    parser = argparse.ArgumentParser(description=description)
+    #parser.add_argument("-v", "--verbose", help="show verbose output", default=0, action='count')
+    parser.add_argument("-c", "--core", help="flash ESPurna core", default=0, action='count')
+    parser.add_argument("-f", "--flash", help="flash device", default=0, action='count')
+    parser.add_argument("-s", "--sort", help="sort devices list by field", default='hostname')
+    args = parser.parse_args()
+
+    print
+    print description
+    print
+
+    # Enable logging if verbose
+    #logging.basicConfig(level=logging.DEBUG)
+    #logging.getLogger('zeroconf').setLevel(logging.DEBUG)
+
+    # Look for sevices
+    zeroconf = Zeroconf()
+    browser = ServiceBrowser(zeroconf, "_arduino._tcp.local.", handlers=[on_service_state_change])
+    sleep(1)
+    zeroconf.close()
+
+    # Sort list
+    field = args.sort.lower()
+    if field not in devices[0]:
+        print "Unknown field '%s'\n" % field
+        sys.exit(1)
+    devices = sorted(devices, key=lambda device: device.get(field, ''))
+
+    # List devices
+    list()
+
+    # Flash device
+    if args.flash > 0:
+        device = flash()
+        if device:
+
+            # Flash core version?
+            if args.core > 0:
+                device['flags'] = "-DESPURNA_CORE " + device['flags']
+
+            env = "esp8266-%sm-ota" % device['size']
+
+            # Summary
+            print
+            print "ESPURNA_IP    = %s" % device['ip']
+            print "ESPURNA_BOARD = %s" % device['board']
+            print "ESPURNA_AUTH  = %s" % device['auth']
+            print "ESPURNA_FLAGS = %s" % device['flags']
+            print "ESPURNA_ENV   = %s" % env
+
+            response = raw_input("\nAre these values right [y/N]: ")
+            print
+            if response == "y":
+                run(device, env)

code/ota_flash.sh

@@ -1,225 +0,0 @@
-#!/bin/bash
-
-ip=
-board=
-size=
-auth=
-flags=
-
-export boards=()
-ips=""
-
-exists() {
-    command -v "$1" >/dev/null 2>&1
-}
-
-echo_pad() {
-    string=$1
-    pad=$2
-    printf '%s' "$string"
-    printf '%*s' $(( $pad - ${#string} ))
-}
-
-useAvahi() {
-
-    echo_pad "#" 4
-    echo_pad "HOSTNAME" 25
-    echo_pad "IP" 25
-    echo_pad "APP" 15
-    echo_pad "VERSION" 15
-    echo_pad "DEVICE" 30
-    echo_pad "MEM_SIZE" 10
-    echo_pad "SDK_SIZE" 10
-    echo
-
-    printf -v line '%*s\n' 134
-    echo ${line// /-}
-
-    counter=0
-
-    ip_file="/tmp/espurna.flash.ips"
-    board_file="/tmp/espurna.flash.boards"
-    count_file="/tmp/espurna.flash.count"
-    size_file="/tmp/espurna.flash.size"
-    echo -n "" > $ip_file
-    echo -n "" > $board_file
-    echo -n "" > $size_file
-    echo -n "$counter" > $count_file
-
-    avahi-browse -t -r -p  "_arduino._tcp" 2>/dev/null | grep ^= | sort -t ';' -k 3 | while read line; do
-
-        (( counter++ ))
-        echo "$counter" > $count_file
-
-        hostname=`echo $line | cut -d ';' -f4`
-        ip=`echo $line | cut -d ';' -f8`
-        txt=`echo $line | cut -d ';' -f10`
-        app_name=`echo $txt | sed -n "s/.*app_name=\([^\"]*\).*/\1/p"`
-        app_version=`echo $txt | sed -n "s/.*app_version=\([^\"]*\).*/\1/p"`
-        board=`echo $txt | sed -n "s/.*target_board=\([^\"]*\).*/\1/p"`
-        mem_size=`echo $txt | sed -n "s/.*mem_size=\([^\"]*\).*/\1/p"`
-        sdk_size=`echo $txt | sed -n "s/.*sdk_size=\([^\"]*\).*/\1/p"`
-
-        echo_pad "$counter" 4
-        echo_pad "$hostname" 25
-        echo_pad "http://$ip" 25
-        echo_pad "$app_name" 15
-        echo_pad "$app_version" 15
-        echo_pad "$board" 30
-        echo_pad "$mem_size" 10
-        echo_pad "$sdk_size" 10
-        echo
-
-        echo -n "$ip;" >> $ip_file
-        echo -n "$board;" >> $board_file
-        if [ "$mem_size" == "$sdk_size" ]; then
-            mem_size=`echo $mem_size | head -c 1`
-            echo -n "$mem_size;" >> $size_file
-        else
-            echo -n ";" >> $size_file
-        fi
-
-    done
-
-    echo
-    read -p "Choose the board you want to flash (empty if none of these): " num
-
-    # None of these
-    if [ "$num" == "" ]; then
-        return
-    fi
-
-    # Check boundaries
-    counter=`cat $count_file`
-    if [ $num -lt 1 ] || [ $num -gt $counter ]; then
-        echo "Board number must be between 1 and $counter"
-        exit 1
-    fi
-
-    # Fill the fields
-    ip=`cat $ip_file | cut -d ';' -f$num`
-    board=`cat $board_file | cut -d ';' -f$num`
-    size=`cat $size_file | cut -d ';' -f$num`
-
-}
-
-getBoard() {
-
-    boards=(`cat espurna/config/hardware.h | grep "defined" | sed "s/.*(\(.*\)).*/\1/" | sort`)
-
-    echo_pad "#" 4
-    echo_pad "DEVICE" 30
-    echo
-
-    printf -v line '%*s\n' 34
-    echo ${line// /-}
-
-    counter=0
-    for board in "${boards[@]}"; do
-        (( counter++ ))
-        echo_pad "$counter" 4
-        echo_pad "$board" 30
-        echo
-    done
-
-    echo
-    read -p "Choose the board you want to flash (empty if none of these): " num
-
-    # None of these
-    if [ "$num" == "" ]; then
-        return
-    fi
-
-    # Check boundaries
-    counter=${#boards[*]}
-    if [ $num -lt 1 ] || [ $num -gt $counter ]; then
-        echo "Board code must be between 1 and $counter"
-        exit 1
-    fi
-
-    # Fill the fields
-    (( num -- ))
-    board=${boards[$num]}
-
-}
-
-# ------------------------------------------------------------------------------
-
-# Welcome
-echo
-echo "--------------------------------------------------------------"
-echo "ESPURNA FIRMWARE OTA FLASHER"
-
-# Get current version
-version=`cat espurna/config/version.h | grep APP_VERSION | awk '{print $3}' | sed 's/"//g'`
-echo "Building for version $version"
-
-echo "--------------------------------------------------------------"
-echo
-
-if exists avahi-browse; then
-    useAvahi
-fi
-
-if [ "$board" == "" ]; then
-    getBoard
-fi
-
-if [ "$board" == "" ]; then
-    read -p "Board type of the device to flash: " -e -i "NODEMCU_LOLIN" board
-fi
-
-if [ "$board" == "" ]; then
-    echo "You must define the board type"
-    exit 2
-fi
-
-if [ "$size" == "" ]; then
-    read -p "Board memory size (1 for 1M, 4 for 4M): " -e size
-fi
-
-if [ "$size" == "" ]; then
-    echo "You must define the board memory size"
-    exit 2
-fi
-
-if [ "$ip" == "" ]; then
-    read -p "IP of the device to flash: " -e -i 192.168.4.1 ip
-fi
-
-if [ "$ip" == "" ]; then
-    echo "You must define the IP of the device"
-    exit 2
-fi
-
-if [ "$auth" == "" ]; then
-    read -p "Authorization key of the device to flash: " auth
-fi
-
-if [ "$flags" == "" ]; then
-    read -p "Extra flags for the build: " -e -i "" flags
-fi
-
-env="esp8266-${size}m-ota"
-
-echo
-echo "ESPURNA_IP    = $ip"
-echo "ESPURNA_BOARD = $board"
-echo "ESPURNA_AUTH  = $auth"
-echo "ESPURNA_FLAGS = $flags"
-echo "ESPURNA_ENV   = $env"
-
-echo
-echo -n "Are these values corrent [y/N]: "
-read response
-
-if [ "$response" != "y" ]; then
-    exit
-fi
-
-export ESPURNA_IP=$ip
-export ESPURNA_BOARD=$board
-export ESPURNA_AUTH=$auth
-export ESPURNA_FLAGS=$flags
-
-pio run -e $env -t upload

code/ota_list.sh

@@ -1,74 +0,0 @@
-#!/bin/bash
-
-exists() {
-    command -v "$1" >/dev/null 2>&1
-}
-
-echo_pad() {
-    string=$1
-    pad=$2
-    printf '%s' "$string"
-    printf '%*s' $(( $pad - ${#string} ))
-}
-
-useAvahi() {
-
-    echo_pad "#" 4
-    echo_pad "HOSTNAME" 25
-    echo_pad "IP" 25
-    echo_pad "APP" 15
-    echo_pad "VERSION" 15
-    echo_pad "DEVICE" 30
-    echo_pad "MEM_SIZE" 10
-    echo_pad "SDK_SIZE" 10
-    echo
-
-    printf -v line '%*s\n' 134
-    echo ${line// /-}
-
-    counter=0
-
-    avahi-browse -t -r -p  "_arduino._tcp" 2>/dev/null | grep ^= | sort -t ';' -k 3 | while read line; do
-
-        (( counter++ ))
-
-        hostname=`echo $line | cut -d ';' -f4`
-        ip=`echo $line | cut -d ';' -f8`
-        txt=`echo $line | cut -d ';' -f10`
-        app_name=`echo $txt | sed -n "s/.*app_name=\([^\"]*\).*/\1/p"`
-        app_version=`echo $txt | sed -n "s/.*app_version=\([^\"]*\).*/\1/p"`
-        board=`echo $txt | sed -n "s/.*target_board=\([^\"]*\).*/\1/p"`
-        mem_size=`echo $txt | sed -n "s/.*mem_size=\([^\"]*\).*/\1/p"`
-        sdk_size=`echo $txt | sed -n "s/.*sdk_size=\([^\"]*\).*/\1/p"`
-
-        echo_pad "$counter" 4
-        echo_pad "$hostname" 25
-        echo_pad "http://$ip" 25
-        echo_pad "$app_name" 15
-        echo_pad "$app_version" 15
-        echo_pad "$board" 30
-        echo_pad "$mem_size" 10
-        echo_pad "$sdk_size" 10
-        echo
-
-    done
-
-    echo
-
-}
-
-# ------------------------------------------------------------------------------
-
-# Welcome
-echo
-echo "--------------------------------------------------------------"
-echo "OTA-UPDATABLE DEVICES"
-echo "--------------------------------------------------------------"
-echo
-
-if exists avahi-browse; then
-    useAvahi
-else
-    echo "Avahi not installed"
-    exit 1
-fi

code/platformio.ini

@@ -4,8 +4,8 @@ src_dir = espurna
 data_dir = espurna/data
 
 [common]
-platform = espressif8266
-#platform = https://github.com/platformio/platform-espressif8266.git#feature/stage
+#platform = espressif8266
+platform = https://github.com/platformio/platform-espressif8266.git#v1.5.0
 build_flags = -g -DMQTT_MAX_PACKET_SIZE=400 ${env.ESPURNA_FLAGS}
 debug_flags = -DDEBUG_ESP_CORE -DDEBUG_ESP_SSL -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM
 build_flags_512k = ${common.build_flags} -Wl,-Tesp8266.flash.512k0.ld
@@ -26,15 +26,27 @@ lib_deps =
     PMS Library
     https://bitbucket.org/xoseperez/justwifi.git#1.1.4
     https://bitbucket.org/xoseperez/hlw8012.git#1.1.0
-    https://bitbucket.org/xoseperez/fauxmoesp.git#2.3.0
+    https://bitbucket.org/xoseperez/fauxmoesp.git#2.4.0
     https://bitbucket.org/xoseperez/nofuss.git#0.2.5
     https://bitbucket.org/xoseperez/debounceevent.git#2.0.1
     https://github.com/xoseperez/my92xx#3.0.0
     https://github.com/xoseperez/RemoteSwitch-arduino-library.git
     https://github.com/markszabo/IRremoteESP8266#v2.2.0
 lib_ignore =
-#extra_scripts = post:core_version.py
-extra_scripts =
+extra_scripts = extra_scripts.py
+
+# ------------------------------------------------------------------------------
+
+[env:espurna-core]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC -DESPURNA_CORE
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 # ------------------------------------------------------------------------------
 
@@ -58,6 +70,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DWEMOS_D1_MINI_RELAYSHIELD -DDEBUG_FAUXMO=Serial -DNOWSAUTH -DASYNC_TCP_SSL_ENABLED=1
 upload_speed = 460800
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:wemos-d1mini-relayshield-ota]
 platform = ${common.platform}
@@ -69,6 +82,7 @@ build_flags = ${common.build_flags} -DWEMOS_D1_MINI_RELAYSHIELD -DDEBUG_FAUXMO=S
 upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
+extra_scripts = ${common.extra_scripts}
 
 [env:nodemcu-lolin]
 platform = ${common.platform}
@@ -79,6 +93,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DNODEMCU_LOLIN -DDEBUG_FAUXMO=Serial -DNOWSAUTH
 upload_speed = 460800
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:nodemcu-lolin-ssl]
 platform = espressif8266_stage
@@ -89,6 +104,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DNODEMCU_LOLIN -DDEBUG_FAUXMO=Serial -DNOWSAUTH -DASYNC_TCP_SSL_ENABLED=1
 upload_speed = 460800
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:nodemcu-lolin-ota]
 platform = ${common.platform}
@@ -101,6 +117,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 # ------------------------------------------------------------------------------
 
@@ -112,6 +129,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DTINKERMAN_ESPURNA_H06
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:tinkerman-espurna-h06-ota]
 platform = ${common.platform}
@@ -124,6 +142,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:tinkerman-espurna-h08]
 platform = ${common.platform}
@@ -133,6 +152,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DTINKERMAN_ESPURNA_H08
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:tinkerman-espurna-h08-ota]
 platform = ${common.platform}
@@ -145,6 +165,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 # ------------------------------------------------------------------------------
 
@@ -157,6 +178,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-basic-ota]
 platform = ${common.platform}
@@ -170,6 +192,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-basic-dht]
 platform = ${common.platform}
@@ -180,6 +203,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC -DDHT_SUPPORT=1
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-basic-dht-ota]
 platform = ${common.platform}
@@ -193,6 +217,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-basic-dallas]
 platform = ${common.platform}
@@ -203,6 +228,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC -DDALLAS_SUPPORT=1
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-rf]
 platform = ${common.platform}
@@ -213,6 +239,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_RF
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-rf-ota]
 platform = ${common.platform}
@@ -226,6 +253,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-th]
 platform = ${common.platform}
@@ -236,6 +264,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_TH
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-th-ota]
 platform = ${common.platform}
@@ -249,6 +278,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-pow]
 platform = ${common.platform}
@@ -259,6 +289,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_POW
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-pow-ota]
 platform = ${common.platform}
@@ -272,6 +303,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-dual]
 platform = ${common.platform}
@@ -281,6 +313,7 @@ board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_DUAL
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-dual-ota]
 platform = ${common.platform}
@@ -293,6 +326,7 @@ build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_DUAL
 upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-dual-r2]
 platform = ${common.platform}
@@ -302,6 +336,7 @@ board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_DUAL_R2
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-dual-ota-r2]
 platform = ${common.platform}
@@ -314,6 +349,7 @@ build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_DUAL_R2
 upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-4ch]
 platform = ${common.platform}
@@ -324,6 +360,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_4CH
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-4ch-ota]
 platform = ${common.platform}
@@ -337,6 +374,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-4ch-pro]
 platform = ${common.platform}
@@ -347,6 +385,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_4CH_PRO
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-4ch-pro-ota]
 platform = ${common.platform}
@@ -360,6 +399,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-touch]
 platform = ${common.platform}
@@ -370,6 +410,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_TOUCH
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-touch-ota]
 platform = ${common.platform}
@@ -383,6 +424,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-b1]
 platform = ${common.platform}
@@ -393,6 +435,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_B1
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-b1-ota]
 platform = ${common.platform}
@@ -406,6 +449,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-t1-1ch]
 platform = ${common.platform}
@@ -416,6 +460,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_T1_1CH
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-t1-1ch-ota]
 platform = ${common.platform}
@@ -429,6 +474,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-t1-2ch]
 platform = ${common.platform}
@@ -439,6 +485,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_T1_2CH
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-t1-2ch-ota]
 platform = ${common.platform}
@@ -452,6 +499,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-t1-3ch]
 platform = ${common.platform}
@@ -462,6 +510,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_T1_3CH
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-t1-3ch-ota]
 platform = ${common.platform}
@@ -475,6 +524,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-led]
 platform = ${common.platform}
@@ -485,6 +535,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_LED
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-led-ota]
 platform = ${common.platform}
@@ -498,6 +549,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-rfbridge]
 platform = ${common.platform}
@@ -508,6 +560,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_RFBRIDGE
 monitor_baud = 19200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-rfbridge-ota]
 platform = ${common.platform}
@@ -521,6 +574,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=Algernon1 --port 8266
 monitor_baud = 19200
+extra_scripts = ${common.extra_scripts}
 
 # ------------------------------------------------------------------------------
 
@@ -533,6 +587,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SLAMPHER
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-slampher-ota]
 platform = ${common.platform}
@@ -546,6 +601,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-s20]
 platform = ${common.platform}
@@ -556,6 +612,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_S20
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-s20-ota]
 platform = ${common.platform}
@@ -569,6 +626,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-1ch-inching]
 platform = ${common.platform}
@@ -579,6 +637,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_1CH_INCHING
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-1ch-inching-ota]
 platform = ${common.platform}
@@ -592,6 +651,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-motor]
 platform = ${common.platform}
@@ -602,6 +662,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_MOTOR
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-motor-ota]
 platform = ${common.platform}
@@ -615,6 +676,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 # ------------------------------------------------------------------------------
 
@@ -626,6 +688,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DELECTRODRAGON_WIFI_IOT -DDHT_SUPPORT=1
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:electrodragon-wifi-iot-ota]
 platform = ${common.platform}
@@ -638,6 +701,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:workchoice-ecoplug]
 platform = ${common.platform}
@@ -648,6 +712,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DWORKCHOICE_ECOPLUG
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:workchoice-ecoplug-ota]
 platform = ${common.platform}
@@ -661,6 +726,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:jangoe-wifi-relay]
 platform = ${common.platform}
@@ -670,6 +736,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DJANGOE_WIFI_RELAY_NC
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:jangoe-wifi-relay-ota]
 platform = ${common.platform}
@@ -682,6 +749,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:openenergymonitor-mqtt-relay]
 platform = ${common.platform}
@@ -691,6 +759,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DOPENENERGYMONITOR_MQTT_RELAY -DDALLAS_SUPPORT=1
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:openenergymonitor-mqtt-relay-ota]
 platform = ${common.platform}
@@ -703,6 +772,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:jorgegarcia-wifi-relays]
 platform = ${common.platform}
@@ -712,6 +782,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DJORGEGARCIA_WIFI_RELAYS
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:jorgegarcia-wifi-relays-ota]
 platform = ${common.platform}
@@ -724,6 +795,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:aithinker-ai-light]
 platform = ${common.platform}
@@ -734,6 +806,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DAITHINKER_AI_LIGHT
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:aithinker-ai-light-ota]
 platform = ${common.platform}
@@ -747,6 +820,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:magichome-led-controller]
 platform = ${common.platform}
@@ -757,6 +831,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:magichome-led-controller-ota]
 platform = ${common.platform}
@@ -770,6 +845,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:magichome-led-controller-20]
 platform = ${common.platform}
@@ -780,6 +856,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER_20
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:magichome-led-controller-20-ota]
 platform = ${common.platform}
@@ -792,6 +869,7 @@ build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER_20
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:huacanxing-h801]
 platform = ${common.platform}
@@ -802,6 +880,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H801
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:huacanxing-h801-ota]
 platform = ${common.platform}
@@ -815,6 +894,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:huacanxing-h802]
 platform = ${common.platform}
@@ -825,6 +905,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H802
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:huacanxing-h802-ota]
 platform = ${common.platform}
@@ -838,6 +919,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-al-lc01]
 platform = ${common.platform}
@@ -848,6 +930,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC01
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-al-lc01-ota]
 platform = ${common.platform}
@@ -861,6 +944,32 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:arilux-al-lc02]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC02
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:arilux-al-lc02-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC02
+upload_speed = 115200
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-al-lc06]
 platform = ${common.platform}
@@ -871,6 +980,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC06
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-al-lc06-ota]
 platform = ${common.platform}
@@ -884,6 +994,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-al-lc11]
 platform = ${common.platform}
@@ -894,6 +1005,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC11
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-al-lc11-ota]
 platform = ${common.platform}
@@ -907,6 +1019,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-e27]
 platform = ${common.platform}
@@ -917,6 +1030,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_E27
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:arilux-e27-ota]
 platform = ${common.platform}
@@ -930,6 +1044,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-bnsz01]
 platform = ${common.platform}
@@ -940,6 +1055,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_BNSZ01
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:itead-bnsz01-ota]
 platform = ${common.platform}
@@ -953,6 +1069,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:wion-50055]
 platform = ${common.platform}
@@ -963,6 +1080,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DWION_50055
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:wion-50055-ota]
 platform = ${common.platform}
@@ -976,6 +1094,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:exs-wifi-relay-v31]
 platform = ${common.platform}
@@ -986,6 +1105,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DEXS_WIFI_RELAY_V31
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:exs-wifi-relay-v31-ota]
 platform = ${common.platform}
@@ -999,6 +1119,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:wemos-v9261f]
 platform = ${common.platform}
@@ -1009,6 +1130,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DGENERIC_V9261F
 upload_speed = 460800
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:wemos-v9261f-ota]
 platform = ${common.platform}
@@ -1021,6 +1143,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:esp01-v9261f]
 platform = ${common.platform}
@@ -1031,6 +1154,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DGENERIC_V9261F
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:esp01-v9261f-ota]
 platform = ${common.platform}
@@ -1044,6 +1168,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:wemos-ech1560]
 platform = ${common.platform}
@@ -1054,6 +1179,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DGENERIC_ECH1560
 upload_speed = 460800
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:wemos-ech1560-ota]
 platform = ${common.platform}
@@ -1066,6 +1192,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:esp01-ech1560]
 platform = ${common.platform}
@@ -1076,6 +1203,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DGENERIC_ECH1560
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:esp01-ech1560-ota]
 platform = ${common.platform}
@@ -1089,6 +1217,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:mancavemade-esplive]
 platform = ${common.platform}
@@ -1099,6 +1228,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DMANCAVEMADE_ESPLIVE
 upload_speed = 460800
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:mancavemade-esplive-ota]
 platform = ${common.platform}
@@ -1111,6 +1241,7 @@ upload_speed = 460800
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:intermittech-quinled]
 platform = ${common.platform}
@@ -1121,6 +1252,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DINTERMITTECH_QUINLED
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:intermittech-quinled-ota]
 platform = ${common.platform}
@@ -1134,6 +1266,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:xenon-sm-pw702u]
 platform = ${common.platform}
@@ -1144,6 +1277,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DXENON_SM_PW702U
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:xenon-sm-pw702u-ota]
 platform = ${common.platform}
@@ -1157,6 +1291,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:authometion-lyt8266]
 platform = ${common.platform}
@@ -1167,6 +1302,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DAUTHOMETION_LYT8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:authometion-lyt8266-ota]
 platform = ${common.platform}
@@ -1180,6 +1316,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:yjzk-switch-2ch]
 platform = ${common.platform}
@@ -1190,6 +1327,7 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DYJZK_SWITCH_2CH
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:yjzk-switch-2ch-ota]
 platform = ${common.platform}
@@ -1203,6 +1341,7 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 [env:generic-8ch]
 platform = ${common.platform}
@@ -1213,6 +1352,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DGENERIC_8CH
 upload_speed = 460800
 monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
 
 # ------------------------------------------------------------------------------
 # GENERIC OTA ENVIRONMENTS
@@ -1229,6 +1369,7 @@ build_flags = ${common.build_flags_1m} -D${env.ESPURNA_BOARD}
 upload_speed = 115200
 upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
 
 [env:esp8266-4m-ota]
 platform = ${common.platform}
@@ -1241,3 +1382,4 @@ build_flags = ${common.build_flags} -D${env.ESPURNA_BOARD}
 upload_speed = 115200
 upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}

code/requirements.txt

@@ -0,0 +1,7 @@
+enum-compat==0.0.2
+enum34==1.1.6
+netifaces==0.10.6
+ordereddict==1.1
+six==1.11.0
+sortedcontainers==1.5.9
+zeroconf==0.19.1