Added SmartLife Mini Smart Socket RGB (thanks to @kuppe234, #1411)

code/espurna/config/arduino.h

@@ -109,6 +109,7 @@
 //#define MAGICHOME_ZJ_WFMN_A_11
 //#define MAGICHOME_ZJ_WFMN_B_11
 //#define GBLIFE_RGBW_SOCKET
+//#define SMARTLIFE_MINI_SMART_SOCKET
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -3178,6 +3178,57 @@
     #define LIGHT_CH3_INVERSE   0
     #define LIGHT_CH4_INVERSE   0	
     
+// ----------------------------------------------------------------------------------------
+//  Smart life Mini Smart Socket is similar Homecube 16A but some GPIOs differ
+//  https://www.ebay.de/itm/Smart-Steckdose-WIFI-WLAN-Amazon-Alexa-Fernbedienung-Home-Socket-Zeitschaltuh-DE/123352026749?hash=item1cb85a8e7d:g:IasAAOSwk6dbj390
+// ----------------------------------------------------------------------------------------
+
+#elif defined(SMARTLIFE_MINI_SMART_SOCKET)
+
+    // Info
+    #define MANUFACTURER                "SMARTLIFE"
+    #define DEVICE                      "MINI_SMART_SOCKET"
+
+    // Buttons
+    #define BUTTON1_PIN                 13
+    #define BUTTON1_MODE                BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY               1
+
+    // Relays
+    #define RELAY1_PIN                  15
+    #define RELAY1_TYPE                 RELAY_TYPE_NORMAL
+
+    // LEDs
+    //Red   LED: 0
+    //Green LED: 4
+    //Blue  LED: 2
+
+    // Light
+    #define RELAY_PROVIDER              RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER              LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT           1
+    #define LIGHT_CHANNELS              3
+    #define LIGHT_CH1_PIN               0       // RED
+    #define LIGHT_CH2_PIN               4       // GREEN
+    #define LIGHT_CH3_PIN               2       // BLUE
+    #define LIGHT_CH1_INVERSE           0
+    #define LIGHT_CH2_INVERSE           0
+    #define LIGHT_CH3_INVERSE           0
+
+    // HJL01 / BL0937
+    #ifndef HLW8012_SUPPORT
+    #define HLW8012_SUPPORT             1
+    #endif
+    #define HLW8012_SEL_PIN             12
+    #define HLW8012_CF1_PIN             14
+    #define HLW8012_CF_PIN              5
+
+    #define HLW8012_SEL_CURRENT         LOW
+    #define HLW8012_CURRENT_RATIO       25740
+    #define HLW8012_VOLTAGE_RATIO       313400
+    #define HLW8012_POWER_RATIO         3414290
+    #define HLW8012_INTERRUPT_ON        FALLING
+
 // -----------------------------------------------------------------------------
 // TEST boards (do not use!!)
 // -----------------------------------------------------------------------------

code/platformio.ini

@@ -2978,3 +2978,29 @@ upload_port = ${common.upload_port}
 upload_flags = ${common.upload_flags}
 monitor_speed = ${common.monitor_speed}
 extra_scripts = ${common.extra_scripts}
+
+[env:smartlife-mini-smart-socket]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_1m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DSMARTLIFE_MINI_SMART_SOCKET
+upload_speed = ${common.upload_speed}
+monitor_speed = ${common.monitor_speed}
+extra_scripts = ${common.extra_scripts}
+
+[env:smartlife-mini-smart-socket-ota]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_1m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DSMARTLIFE_MINI_SMART_SOCKET
+upload_speed = ${common.upload_speed}
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
+monitor_speed = ${common.monitor_speed}
+extra_scripts = ${common.extra_scripts}