Browse Source

tonbux mosquito killer support

tonbux mosquito killer support
rfm69
gn0st1c 6 years ago
parent
commit
184da877be
5 changed files with 76 additions and 0 deletions
  1. +1
    -0
      code/espurna/config/arduino.h
  2. +35
    -0
      code/espurna/config/hardware.h
  3. +16
    -0
      code/espurna/migrate.ino
  4. +24
    -0
      code/platformio.ini
  5. BIN
      images/devices/tonbux-mosquito-killer.jpg

+ 1
- 0
code/espurna/config/arduino.h View File

@ -81,6 +81,7 @@
//#define ZHILDE_EU44_W //#define ZHILDE_EU44_W
//#define LUANI_HVIO //#define LUANI_HVIO
//#define ALLNET_4DUINO_IOT_WLAN_RELAIS //#define ALLNET_4DUINO_IOT_WLAN_RELAIS
//#define TONBUX_MOSQUITO_KILLER
//-------------------------------------------------------------------------------- //--------------------------------------------------------------------------------
// Features (values below are non-default values) // Features (values below are non-default values)


+ 35
- 0
code/espurna/config/hardware.h View File

@ -2072,6 +2072,41 @@
#define LED1_PIN 15 #define LED1_PIN 15
#define LED1_PIN_INVERSE 0 #define LED1_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// Tonbux 50-100M Smart Mosquito Killer USB
// https://www.aliexpress.com/item/Original-Tonbux-50-100M-Smart-Mosquito-Killer-USB-Plug-No-Noise-Repellent-App-Smart-Module/32859330820.html
// -----------------------------------------------------------------------------
#elif defined(TONBUX_MOSQUITO_KILLER)
// Info
#define MANUFACTURER "TONBUX"
#define DEVICE "MOSQUITO_KILLER"
// Buttons
#define BUTTON1_PIN 2
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define BUTTON1_RELAY 1
// Relays
#define RELAY1_PIN 5 // not a relay, fan
#define RELAY1_TYPE RELAY_TYPE_NORMAL
// LEDs
#define LED1_PIN 15 // blue led
#define LED1_PIN_INVERSE 1
#define LED1_MODE LED_MODE_WIFI
#define LED2_PIN 14 // red led
#define LED2_PIN_INVERSE 1
#define LED2_MODE LED_MODE_RELAY
#define LED3_PIN 12 // UV leds (1-2-3-4-5-6-7-8)
#define LED3_PIN_INVERSE 0
#define LED3_RELAY 1
#define LED4_PIN 16 // UV leds (9-10-11)
#define LED4_PIN_INVERSE 0
#define LED4_RELAY 1
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
// TEST boards (do not use!!) // TEST boards (do not use!!)
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------


+ 16
- 0
code/espurna/migrate.ino View File

@ -937,6 +937,22 @@ void migrate() {
setSetting("relayResetGPIO", 0, 12); setSetting("relayResetGPIO", 0, 12);
setSetting("relayType", 0, RELAY_TYPE_LATCHED); setSetting("relayType", 0, RELAY_TYPE_LATCHED);
#elif defined(TONBUX_MOSQUITO_KILLER)
setSetting("board", 74);
setSetting("ledGPIO", 0, 15);
setSetting("ledLogic", 0, 1);
setSetting("ledGPIO", 1, 14);
setSetting("ledLogic", 1, 1);
setSetting("ledGPIO", 2, 12);
setSetting("ledLogic", 2, 0);
setSetting("ledGPIO", 3, 16);
setSetting("ledLogic", 3, 0);
setSetting("btnGPIO", 0, 2);
setSetting("btnRelay", 0, 0);
setSetting("relayGPIO", 0, 5);
setSetting("relayType", 0, RELAY_TYPE_NORMAL);
#else #else
// Allow users to define new settings without migration config // Allow users to define new settings without migration config


+ 24
- 0
code/platformio.ini View File

@ -2128,3 +2128,27 @@ upload_speed = 115200
upload_port = "${env.ESPURNA_IP}" upload_port = "${env.ESPURNA_IP}"
upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
extra_scripts = ${common.extra_scripts} extra_scripts = ${common.extra_scripts}
[env:tonbux-mosquito-killer]
platform = ${common.platform}
framework = arduino
board = esp01_1m
board_flash_mode = dout
lib_deps = ${common.lib_deps}
lib_ignore = ${common.lib_ignore}
build_flags = ${common.build_flags_1m} -DTONBUX_MOSQUITO_KILLER
monitor_baud = 115200
extra_scripts = ${common.extra_scripts}
[env:tonbux-mosquito-killer-ota]
platform = ${common.platform}
framework = arduino
board = esp01_1m
board_flash_mode = dout
lib_deps = ${common.lib_deps}
lib_ignore = ${common.lib_ignore}
build_flags = ${common.build_flags_1m} -DTONBUX_MOSQUITO_KILLER
upload_speed = 115200
upload_port = "${env.ESPURNA_IP}"
upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
extra_scripts = ${common.extra_scripts}

BIN
images/devices/tonbux-mosquito-killer.jpg View File

Before After
Width: 400  |  Height: 400  |  Size: 16 KiB

Loading…
Cancel
Save