|
|
@ -10,20 +10,25 @@ |
|
|
|
// For example, some configuration options for BUTTON, RELAY and LED modules. |
|
|
|
// See general.h, defaults.h and types.h for all of the available flags. |
|
|
|
// |
|
|
|
// BUTTON[1-8]_PIN: GPIO for the n-th button (1-based, up to 8 buttons) |
|
|
|
// BUTTON[1-8]_RELAY: Relay number that will be bind to the n-th button (1-based) |
|
|
|
// BUTTON[1-8]_CONFIG: Configuration mask (e.g. BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together) |
|
|
|
// BUTTON[1-8]_CONFIG: Configuration mask (note that BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together) |
|
|
|
// - BUTTON_PUSHBUTTON: button event is fired when released |
|
|
|
// - BUTTON_SWITCH: button event is fired when pressed or released |
|
|
|
// - BUTTON_DEFAULT_HIGH: there is a pull up in place |
|
|
|
// - BUTTON_DEFAULT_HIGH: there is a pull up in place, HIGH is default state |
|
|
|
// - BUTTON_DEFAULT_LOW: there is a pull down in place, LOW is default state |
|
|
|
// - BUTTON_DEFAULT_BOOT: use state that we read on firmware boot |
|
|
|
// - BUTTON_SET_PULLUP: set pullup by software |
|
|
|
// - BUTTON_SET_PULLDOWN: set pulldown by software (esp8266: only GPIO16) |
|
|
|
// BUTTON[1-8]_... actions: Check types.h for BUTTONx_ACTION_... |
|
|
|
// BUTTON[1-8]_PIN: GPIO for the n-th button (1-based, up to 8 buttons) |
|
|
|
// BUTTON[1-8]_PROVIDER: Check types.h for the BUTTON_PROVIDER_... |
|
|
|
// BUTTON[1-8]_RELAY: Relay number that will be bound to the n-th button (when ACTION is set to ON, OFF or TOGGLE; 1-based) |
|
|
|
// |
|
|
|
// RELAY[1-8]_PIN: GPIO for the n-th relay (1-based, up to 8 relays) |
|
|
|
// RELAY[1-8]_TYPE: Relay can be RELAY_TYPE_NORMAL, RELAY_TYPE_INVERSE, RELAY_TYPE_LATCHED or RELAY_TYPE_LATCHED_INVERSE |
|
|
|
// |
|
|
|
// LED[1-8]_PIN: GPIO for the n-th LED (1-based, up to 8 LEDs) |
|
|
|
// LED[1-8]_PIN_INVERSE: LED has inversed logic (lit when pulled down) |
|
|
|
// LED[1-8]_MODE: Check types.h for LED_MODE_% |
|
|
|
// LED[1-8]_MODE: Check types.h for LED_MODE_... |
|
|
|
// LED[1-8]_RELAY: Linked relay (1-based) |
|
|
|
// |
|
|
|
// Besides, other hardware specific information should be stated here |
|
|
@ -371,10 +376,10 @@ |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
|
|
|
|
#define BUTTON2_PIN 4 |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_BOOT |
|
|
|
#define BUTTON2_RELAY 1 |
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
// Relays |
|
|
|
#define RELAY1_PIN 12 |
|
|
@ -1686,15 +1691,15 @@ |
|
|
|
// Buttons |
|
|
|
#define BUTTON1_PIN 5 |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT | BUTTON_SET_PULLUP |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
#define BUTTON2_PIN 4 |
|
|
|
#define BUTTON2_RELAY 2 |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP |
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT | BUTTON_SET_PULLUP |
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
// Relays |
|
|
|
#define RELAY1_PIN 14 |
|
|
@ -2565,11 +2570,11 @@ |
|
|
|
|
|
|
|
// Buttons |
|
|
|
#define BUTTON1_PIN 4 // D2 |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_BOOT |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
|
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
// Relays |
|
|
|
#define RELAY1_PIN 5 // D1 |
|
|
@ -2845,17 +2850,17 @@ |
|
|
|
// Buttons |
|
|
|
#define BUTTON1_PIN 12 |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_HIGH //Hardware Pullup |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT //Hardware Pullup |
|
|
|
|
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
#define BUTTON2_PIN 13 |
|
|
|
#define BUTTON2_RELAY 2 |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_HIGH //Hardware Pullup |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT //Hardware Pullup |
|
|
|
|
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
// Relays |
|
|
|
#define RELAY1_PIN 4 |
|
|
@ -3721,11 +3726,11 @@ |
|
|
|
|
|
|
|
// Buttons |
|
|
|
#define BUTTON1_PIN 5 |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
|
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
// Relays |
|
|
|
#define RELAY1_PIN 4 |
|
|
@ -3740,17 +3745,17 @@ |
|
|
|
// Buttons |
|
|
|
#define BUTTON1_PIN 12 |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT |
|
|
|
|
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
#define BUTTON2_PIN 14 |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT |
|
|
|
#define BUTTON2_RELAY 2 |
|
|
|
|
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
// Relays |
|
|
|
#define RELAY1_PIN 4 |
|
|
@ -3765,11 +3770,11 @@ |
|
|
|
|
|
|
|
// Buttons |
|
|
|
#define BUTTON1_PIN 4 |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
|
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
#define BUTTON2_PIN 2 |
|
|
|
#define BUTTON2_CONFIG BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH |
|
|
@ -3811,18 +3816,18 @@ |
|
|
|
|
|
|
|
// Buttons |
|
|
|
#define BUTTON1_PIN 13 |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH |
|
|
|
#define BUTTON1_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT |
|
|
|
#define BUTTON1_RELAY 1 |
|
|
|
|
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON1_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON1_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
#define BUTTON2_PIN 5 |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH |
|
|
|
#define BUTTON2_CONFIG BUTTON_SWITCH | BUTTON_DEFAULT_BOOT |
|
|
|
#define BUTTON2_RELAY 2 |
|
|
|
|
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_ON |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_OFF |
|
|
|
#define BUTTON2_PRESS BUTTON_ACTION_TOGGLE |
|
|
|
#define BUTTON2_RELEASE BUTTON_ACTION_TOGGLE |
|
|
|
|
|
|
|
#define BUTTON3_PIN 2 |
|
|
|
#define BUTTON3_CONFIG BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH |
|
|
|