Untested support for WiOn 50055 Wifi Wall Outlet & Tap

code/build.sh

@@ -18,6 +18,7 @@ ALL_ENVIRONMENTS="
     aithinker-ai-light
     magichome-led-controller
     huacanxing-h801
+    wion-50055
 "
 if [ $# -eq 0 ]; then
     environments=$ALL_ENVIRONMENTS

code/esp8266.flash.1m0.ld

@@ -1,5 +1,5 @@
 /* Flash Split for 1M chips */
-/* sketch 1004KB */
+/* sketch 999KB */
 /* eeprom 20KB */
 
 MEMORY

code/espurna/config/hardware.h

@@ -758,6 +758,33 @@
     #define LED1_PIN            16
     #define LED1_PIN_INVERSE    0
 
+// -----------------------------------------------------------------------------
+// WiOn 50055 Indoor Wi-Fi Wall Outlet & Tap
+// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50050-Indoor-Wi-Fi-Outlet-Wireless-Switch-Programmable-Timer-%2F263112281551
+// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50055-Indoor-Wi-Fi-Wall-Tap-Monitor-Energy-Usage-Wireless-Smart-Switch-%2F263020837777
+// -----------------------------------------------------------------------------
+
+#elif defined(WION_50055)
+
+    // Currently untested, does not support energy monitoring
+
+    // Info
+    #define MANUFACTURER        "WION"
+    #define DEVICE              "50055"
+
+    // Buttons
+    #define BUTTON1_PIN         13
+    #define BUTTON1_RELAY       1
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+
+    // Relays
+    #define RELAY1_PIN          15
+    #define RELAY1_PIN_INVERSE  0
+
+    // LEDs
+    #define LED1_PIN            2
+    #define LED1_PIN_INVERSE    0
+
 // -----------------------------------------------------------------------------
 // Unknown hardware
 // -----------------------------------------------------------------------------

code/espurna/hardware.ino

@@ -400,6 +400,16 @@ void hwUpwardsCompatibility() {
         setSetting("relayGPIO", 1, 12);
         setSetting("relayLogic", 1, 0);
 
+    #elif defined(WION_50055)
+
+        setSetting("board", 34);
+        setSetting("ledGPIO", 1, 2);
+        setSetting("ledLogic", 1, 0);
+        setSetting("btnGPIO", 1, 13);
+        setSetting("btnRelay", 1,1);
+        setSetting("relayGPIO", 1, 15);
+        setSetting("relayLogic", 1, 0);
+
     #else
 
         #error "UNSUPPORTED HARDWARE!"

code/platformio.ini

@@ -651,3 +651,24 @@ build_flags = ${common.build_flags_1m} -DITEAD_BN_SZ01
 upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
+
+[env:wion-50055]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DWION_50055
+
+[env:wion-50055-ota]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DWION_50055
+upload_speed = 115200
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266