support for tunbox powerstrip02

support for tunbox powerstrip02

code/espurna/config/arduino.h

@@ -62,6 +62,7 @@
 //#define WEMOS_D1_TARPUNA_SHIELD
 //#define GIZWITS_WITTY_CLOUD
 //#define EUROMATE_WIFI_STECKER_SCHUKO
+//#define TONBUX_POWERSTRIP02
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -1531,6 +1531,40 @@
     #define TERMINAL_SUPPORT        0
     #define DEBUG_SERIAL_SUPPORT    0
 
+// -----------------------------------------------------------------------------
+// Tonbux Powerstrip02
+// -----------------------------------------------------------------------------
+
+#elif defined(TONBUX_POWERSTRIP02)
+
+    // Info
+    #define MANUFACTURER        "Tonbux"
+    #define DEVICE              "Powerstrip02"
+
+    // Buttons
+    #define BUTTON1_PIN         5
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY       0
+
+    // Relays
+    #define RELAY1_PIN          4
+    #define RELAY1_TYPE         RELAY_TYPE_INVERSE
+    #define RELAY2_PIN          13
+    #define RELAY2_TYPE         RELAY_TYPE_INVERSE
+    #define RELAY3_PIN          12
+    #define RELAY3_TYPE         RELAY_TYPE_INVERSE
+    #define RELAY4_PIN          14
+    #define RELAY4_TYPE         RELAY_TYPE_INVERSE
+    // Not a relay. USB ports on/off
+    #define RELAY5_PIN          16
+    #define RELAY5_TYPE         RELAY_TYPE_NORMAL
+
+    // LEDs
+    #define LED1_PIN            0   // 1 blue led
+    #define LED1_PIN_INVERSE    0
+    #define LED2_PIN            3   // 3 red leds
+    #define LED2_PIN_INVERSE    0
+
 // -----------------------------------------------------------------------------
 // TEST boards (do not use!!)
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -739,6 +739,26 @@ void migrate() {
             setSetting("relayGPIO", 0, 5);
             setSetting("relayType", 0, RELAY_TYPE_NORMAL);
 
+        #elif defined(TONBUX_POWERSTRIP02)
+
+            setSetting("board", 56);
+            setSetting("relayGPIO", 0, 4);
+            setSetting("relayGPIO", 1, 13);
+            setSetting("relayGPIO", 2, 12);
+            setSetting("relayGPIO", 3, 14);
+            setSetting("relayGPIO", 4, 16);
+            setSetting("relayType", 0, RELAY_TYPE_INVERSE);
+            setSetting("relayType", 1, RELAY_TYPE_INVERSE);
+            setSetting("relayType", 2, RELAY_TYPE_INVERSE);
+            setSetting("relayType", 3, RELAY_TYPE_INVERSE);
+            setSetting("relayType", 4, RELAY_TYPE_NORMAL);
+            setSetting("ledGPIO", 0, 0);
+            setSetting("ledLogic", 0, 0);
+            setSetting("ledGPIO", 1, 3);
+            setSetting("ledLogic", 1, 0);
+            setSetting("btnGPIO", 0, 5);
+            setSetting("btnRelay", 0, 0);
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -1473,7 +1473,31 @@ upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 extra_scripts = ${common.extra_scripts}
 
-[env:stm-relay-ota]
+[env:tunbox-powerstrip02]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags} -DTONBUX_POWERSTRIP02
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:tunbox-powerstrip02-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags} -DTONBUX_POWERSTRIP02
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
+
+[env:stm-relay]
 platform = ${common.platform}
 framework = arduino
 board = esp01_1m