|
|
@ -18,179 +18,22 @@ Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com> |
|
|
|
|
|
|
|
bool _power_enabled = false; |
|
|
|
bool _power_ready = false; |
|
|
|
bool _power_newdata = false; |
|
|
|
|
|
|
|
double _power_current = 0; |
|
|
|
double _power_voltage = 0; |
|
|
|
double _power_apparent = 0; |
|
|
|
MedianFilter _filter_current = MedianFilter(POWER_REPORT_EVERY); |
|
|
|
MedianFilter _filter_current = MedianFilter(POWER_REPORT_BUFFER); |
|
|
|
|
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
double _power_active = 0; |
|
|
|
MedianFilter _filter_voltage = MedianFilter(POWER_REPORT_EVERY); |
|
|
|
MedianFilter _filter_active = MedianFilter(POWER_REPORT_EVERY); |
|
|
|
MedianFilter _filter_apparent = MedianFilter(POWER_REPORT_EVERY); |
|
|
|
double _power_reactive = 0; |
|
|
|
double _power_factor = 0; |
|
|
|
MedianFilter _filter_voltage = MedianFilter(POWER_REPORT_BUFFER); |
|
|
|
MedianFilter _filter_active = MedianFilter(POWER_REPORT_BUFFER); |
|
|
|
MedianFilter _filter_apparent = MedianFilter(POWER_REPORT_BUFFER); |
|
|
|
#endif
|
|
|
|
|
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
#include <EmonLiteESP.h>
|
|
|
|
EmonLiteESP _emon; |
|
|
|
#endif
|
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_EMON_ADC121
|
|
|
|
|
|
|
|
#include "brzo_i2c.h"
|
|
|
|
|
|
|
|
// ADC121 Registers
|
|
|
|
#define ADC121_REG_RESULT 0x00
|
|
|
|
#define ADC121_REG_ALERT 0x01
|
|
|
|
#define ADC121_REG_CONFIG 0x02
|
|
|
|
#define ADC121_REG_LIMITL 0x03
|
|
|
|
#define ADC121_REG_LIMITH 0x04
|
|
|
|
#define ADC121_REG_HYST 0x05
|
|
|
|
#define ADC121_REG_CONVL 0x06
|
|
|
|
#define ADC121_REG_CONVH 0x07
|
|
|
|
|
|
|
|
#endif // POWER_PROVIDER == POWER_PROVIDER_EMON_ADC121
|
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
#include <HLW8012.h>
|
|
|
|
#include <ESP8266WiFi.h>
|
|
|
|
HLW8012 _hlw8012; |
|
|
|
WiFiEventHandler _power_wifi_onconnect; |
|
|
|
WiFiEventHandler _power_wifi_ondisconnect; |
|
|
|
#endif // POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// PROVIDERS
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
|
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
|
|
|
|
unsigned int currentCallback() { |
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_EMON_ANALOG
|
|
|
|
|
|
|
|
return analogRead(0); |
|
|
|
|
|
|
|
#endif // POWER_PROVIDER == POWER_PROVIDER_EMON_ANALOG
|
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_EMON_ADC121
|
|
|
|
|
|
|
|
uint8_t buffer[2]; |
|
|
|
brzo_i2c_start_transaction(POWER_I2C_ADDRESS, I2C_SCL_FREQUENCY); |
|
|
|
buffer[0] = ADC121_REG_RESULT; |
|
|
|
brzo_i2c_write(buffer, 1, false); |
|
|
|
brzo_i2c_read(buffer, 2, false); |
|
|
|
brzo_i2c_end_transaction(); |
|
|
|
unsigned int value; |
|
|
|
value = (buffer[0] & 0x0F) << 8; |
|
|
|
value |= buffer[1]; |
|
|
|
return value; |
|
|
|
|
|
|
|
#endif // POWER_PROVIDER == POWER_PROVIDER_EMON_ADC121
|
|
|
|
|
|
|
|
} |
|
|
|
|
|
|
|
#endif // POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
|
|
|
|
void ICACHE_RAM_ATTR _hlw_cf1_isr() { |
|
|
|
_hlw8012.cf1_interrupt(); |
|
|
|
} |
|
|
|
|
|
|
|
void ICACHE_RAM_ATTR _hlw_cf_isr() { |
|
|
|
_hlw8012.cf_interrupt(); |
|
|
|
} |
|
|
|
|
|
|
|
void _hlwSetCalibration() { |
|
|
|
double value; |
|
|
|
value = getSetting("powerRatioP", 0).toFloat(); |
|
|
|
if (value > 0) _hlw8012.setPowerMultiplier(value); |
|
|
|
value = getSetting("powerRatioC", 0).toFloat(); |
|
|
|
if (value > 0) _hlw8012.setCurrentMultiplier(value); |
|
|
|
value = getSetting("powerRatioV", 0).toFloat(); |
|
|
|
if (value > 0) _hlw8012.setVoltageMultiplier(value); |
|
|
|
} |
|
|
|
|
|
|
|
void _hlwGetCalibration() { |
|
|
|
setSetting("powerRatioP", _hlw8012.getPowerMultiplier()); |
|
|
|
setSetting("powerRatioC", _hlw8012.getCurrentMultiplier()); |
|
|
|
setSetting("powerRatioV", _hlw8012.getVoltageMultiplier()); |
|
|
|
saveSettings(); |
|
|
|
} |
|
|
|
|
|
|
|
void _hlwResetCalibration() { |
|
|
|
_hlw8012.resetMultipliers(); |
|
|
|
_hlwGetCalibration(); |
|
|
|
} |
|
|
|
|
|
|
|
void _hlwExpectedPower(unsigned int power) { |
|
|
|
if (power > 0) { |
|
|
|
_hlw8012.expectedActivePower(power); |
|
|
|
_hlwGetCalibration(); |
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
void _hlwExpectedCurrent(double current) { |
|
|
|
if (current > 0) { |
|
|
|
_hlw8012.expectedCurrent(current); |
|
|
|
_hlwGetCalibration(); |
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
void _hlwExpectedVoltage(unsigned int voltage) { |
|
|
|
if (voltage > 0) { |
|
|
|
_hlw8012.expectedVoltage(voltage); |
|
|
|
_hlwGetCalibration(); |
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
double _powerCurrent() { |
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
double current = _emon.getCurrent(POWER_SAMPLES); |
|
|
|
current -= POWER_CURRENT_OFFSET; |
|
|
|
if (current < 0) current = 0; |
|
|
|
return current; |
|
|
|
#elif POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
return _hlw8012.getCurrent(); |
|
|
|
#else
|
|
|
|
return 0; |
|
|
|
#endif
|
|
|
|
} |
|
|
|
|
|
|
|
double _powerVoltage() { |
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
return _power_voltage; |
|
|
|
#elif POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
return _hlw8012.getVoltage(); |
|
|
|
#else
|
|
|
|
return 0; |
|
|
|
#endif
|
|
|
|
} |
|
|
|
|
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
double _powerActivePower() { |
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
return _hlw8012.getActivePower(); |
|
|
|
#else
|
|
|
|
return 0; |
|
|
|
#endif
|
|
|
|
} |
|
|
|
#endif
|
|
|
|
|
|
|
|
double _powerApparentPower() { |
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
return _powerCurrent() * _powerVoltage(); |
|
|
|
#elif POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
return _hlw8012.getApparentPower(); |
|
|
|
#else
|
|
|
|
return 0; |
|
|
|
#endif
|
|
|
|
} |
|
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// PRIVATE METHODS
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
@ -215,7 +58,7 @@ void _powerAPISetup() { |
|
|
|
} |
|
|
|
}); |
|
|
|
|
|
|
|
apiRegister(MQTT_TOPIC_APPARENT, MQTT_TOPIC_APPARENT, [](char * buffer, size_t len) { |
|
|
|
apiRegister(MQTT_TOPIC_POWER_APPARENT, MQTT_TOPIC_POWER_APPARENT, [](char * buffer, size_t len) { |
|
|
|
if (_power_ready) { |
|
|
|
snprintf_P(buffer, len, PSTR("%d"), getApparentPower()); |
|
|
|
} else { |
|
|
@ -224,7 +67,7 @@ void _powerAPISetup() { |
|
|
|
}); |
|
|
|
|
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
apiRegister(MQTT_TOPIC_POWER, MQTT_TOPIC_POWER, [](char * buffer, size_t len) { |
|
|
|
apiRegister(MQTT_TOPIC_POWER_ACTIVE, MQTT_TOPIC_POWER_ACTIVE, [](char * buffer, size_t len) { |
|
|
|
if (_power_ready) { |
|
|
|
snprintf_P(buffer, len, PSTR("%d"), getActivePower()); |
|
|
|
} else { |
|
|
@ -266,24 +109,17 @@ double getApparentPower() { |
|
|
|
return _power_apparent; |
|
|
|
} |
|
|
|
|
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
double getActivePower() { |
|
|
|
return _power_active; |
|
|
|
} |
|
|
|
|
|
|
|
double getReactivePower() { |
|
|
|
if (_power_apparent > _power_active) { |
|
|
|
return sqrt(_power_apparent * _power_apparent - _power_active * _power_active); |
|
|
|
} |
|
|
|
return 0; |
|
|
|
return _power_reactive; |
|
|
|
} |
|
|
|
|
|
|
|
double getPowerFactor() { |
|
|
|
if (_power_active > _power_apparent) return 1; |
|
|
|
if (_power_apparent == 0) return 0; |
|
|
|
return (double) _power_active / _power_apparent; |
|
|
|
return _power_factor; |
|
|
|
} |
|
|
|
#endif
|
|
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// PUBLIC API
|
|
|
@ -294,121 +130,16 @@ bool powerEnabled() { |
|
|
|
} |
|
|
|
|
|
|
|
void powerEnabled(bool enabled) { |
|
|
|
if (enabled & !_power_enabled) _powerReset(); |
|
|
|
_power_enabled = enabled; |
|
|
|
#if (POWER_PROVIDER == POWER_PROVIDER_HLW8012) && HLW8012_USE_INTERRUPTS
|
|
|
|
if (_power_enabled) { |
|
|
|
attachInterrupt(HLW8012_CF1_PIN, _hlw_cf1_isr, CHANGE); |
|
|
|
attachInterrupt(HLW8012_CF_PIN, _hlw_cf_isr, CHANGE); |
|
|
|
} else { |
|
|
|
detachInterrupt(HLW8012_CF1_PIN); |
|
|
|
detachInterrupt(HLW8012_CF_PIN); |
|
|
|
} |
|
|
|
#endif
|
|
|
|
powerEnabledProvider(); |
|
|
|
} |
|
|
|
|
|
|
|
void powerConfigure() { |
|
|
|
|
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
_emon.setCurrentRatio(getSetting("powerRatioC", POWER_CURRENT_RATIO).toFloat()); |
|
|
|
_power_voltage = getSetting("powerVoltage", POWER_VOLTAGE).toFloat(); |
|
|
|
#endif
|
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
_hlwSetCalibration(); |
|
|
|
_hlwGetCalibration(); |
|
|
|
#endif
|
|
|
|
|
|
|
|
} |
|
|
|
|
|
|
|
void powerSetup() { |
|
|
|
|
|
|
|
// backwards compatibility
|
|
|
|
moveSetting("pwMainsVoltage", "powerVoltage"); |
|
|
|
moveSetting("emonMains", "powerVoltage"); |
|
|
|
moveSetting("emonVoltage", "powerVoltage"); |
|
|
|
moveSetting("pwCurrentRatio", "powerRatioC"); |
|
|
|
moveSetting("emonRatio", "powerRatioC"); |
|
|
|
moveSetting("powPowerMult", "powerRatioP"); |
|
|
|
moveSetting("powCurrentMult", "powerRatioC"); |
|
|
|
moveSetting("powVoltageMult", "powerRatioV"); |
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
|
|
|
|
// Initialize HLW8012
|
|
|
|
// void begin(unsigned char cf_pin, unsigned char cf1_pin, unsigned char sel_pin, unsigned char currentWhen = HIGH, bool use_interrupts = false, unsigned long pulse_timeout = PULSE_TIMEOUT);
|
|
|
|
// * cf_pin, cf1_pin and sel_pin are GPIOs to the HLW8012 IC
|
|
|
|
// * currentWhen is the value in sel_pin to select current sampling
|
|
|
|
// * set use_interrupts to true to use interrupts to monitor pulse widths
|
|
|
|
// * leave pulse_timeout to the default value, recommended when using interrupts
|
|
|
|
#if HLW8012_USE_INTERRUPTS
|
|
|
|
_hlw8012.begin(HLW8012_CF_PIN, HLW8012_CF1_PIN, HLW8012_SEL_PIN, HLW8012_SEL_CURRENT, true); |
|
|
|
#else
|
|
|
|
_hlw8012.begin(HLW8012_CF_PIN, HLW8012_CF1_PIN, HLW8012_SEL_PIN, HLW8012_SEL_CURRENT, false, 1000000); |
|
|
|
#endif
|
|
|
|
|
|
|
|
// These values are used to calculate current, voltage and power factors as per datasheet formula
|
|
|
|
// These are the nominal values for the Sonoff POW resistors:
|
|
|
|
// * The CURRENT_RESISTOR is the 1milliOhm copper-manganese resistor in series with the main line
|
|
|
|
// * The VOLTAGE_RESISTOR_UPSTREAM are the 5 470kOhm resistors in the voltage divider that feeds the V2P pin in the HLW8012
|
|
|
|
// * The VOLTAGE_RESISTOR_DOWNSTREAM is the 1kOhm resistor in the voltage divider that feeds the V2P pin in the HLW8012
|
|
|
|
_hlw8012.setResistors(HLW8012_CURRENT_R, HLW8012_VOLTAGE_R_UP, HLW8012_VOLTAGE_R_DOWN); |
|
|
|
|
|
|
|
#endif // POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
|
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
_emon.initCurrent(currentCallback, POWER_ADC_BITS, POWER_REFERENCE_VOLTAGE, POWER_CURRENT_RATIO); |
|
|
|
#endif
|
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_EMON_ADC121
|
|
|
|
uint8_t buffer[2]; |
|
|
|
buffer[0] = ADC121_REG_CONFIG; |
|
|
|
buffer[1] = 0x00; |
|
|
|
brzo_i2c_start_transaction(POWER_I2C_ADDRESS, I2C_SCL_FREQUENCY); |
|
|
|
brzo_i2c_write(buffer, 2, false); |
|
|
|
brzo_i2c_end_transaction(); |
|
|
|
#endif
|
|
|
|
|
|
|
|
powerConfigure(); |
|
|
|
|
|
|
|
#if POWER_PROVIDER & POWER_PROVIDER_EMON
|
|
|
|
_emon.warmup(); |
|
|
|
#endif
|
|
|
|
|
|
|
|
#if POWER_PROVIDER == POWER_PROVIDER_HLW8012
|
|
|
|
_power_wifi_onconnect = WiFi.onStationModeGotIP([](WiFiEventStationModeGotIP ipInfo) { |
|
|
|
powerEnabled(true); |
|
|
|
}); |
|
|
|
_power_wifi_ondisconnect = WiFi.onStationModeDisconnected([](WiFiEventStationModeDisconnected ipInfo) { |
|
|
|
powerEnabled(false); |
|
|
|
}); |
|
|
|
#endif
|
|
|
|
|
|
|
|
// API
|
|
|
|
#if WEB_SUPPORT
|
|
|
|
_powerAPISetup(); |
|
|
|
#endif
|
|
|
|
|
|
|
|
DEBUG_MSG_P(PSTR("[POWER] POWER_PROVIDER = %d\n"), POWER_PROVIDER); |
|
|
|
|
|
|
|
powerConfigureProvider(); |
|
|
|
} |
|
|
|
|
|
|
|
void powerLoop() { |
|
|
|
|
|
|
|
static unsigned long last = 0; |
|
|
|
static bool was_disabled = false; |
|
|
|
|
|
|
|
if (!_power_enabled) { |
|
|
|
was_disabled = true; |
|
|
|
return; |
|
|
|
} |
|
|
|
if (was_disabled) { |
|
|
|
was_disabled = false; |
|
|
|
last = millis(); |
|
|
|
_powerReset(); |
|
|
|
} |
|
|
|
|
|
|
|
if (millis() - last < POWER_INTERVAL) return; |
|
|
|
last = millis(); |
|
|
|
void powerRead() { |
|
|
|
|
|
|
|
// Get instantaneous values from HAL
|
|
|
|
double current = _powerCurrent(); |
|
|
@ -457,70 +188,113 @@ void powerLoop() { |
|
|
|
} |
|
|
|
#endif
|
|
|
|
|
|
|
|
// Send MQTT messages averaged every POWER_REPORT_EVERY measurements
|
|
|
|
if (_filter_current.count() == POWER_REPORT_EVERY) { |
|
|
|
} |
|
|
|
|
|
|
|
void powerReport() { |
|
|
|
|
|
|
|
// Get the fitered values
|
|
|
|
_power_current = _filter_current.average(true); |
|
|
|
// Get the fitered values
|
|
|
|
_power_current = _filter_current.average(true); |
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
_power_apparent = _filter_apparent.average(true); |
|
|
|
_power_voltage = _filter_voltage.average(true); |
|
|
|
_power_active = _filter_active.average(true); |
|
|
|
#else
|
|
|
|
_power_apparent = _power_current * _power_voltage; |
|
|
|
_power_active = _power_apparent; |
|
|
|
#endif
|
|
|
|
_power_reactive = (_power_apparent > _power_active) ? sqrt(_power_apparent * _power_apparent - _power_active * _power_active) : 0; |
|
|
|
_power_factor = (_power_apparent > 0) ? _power_active / _power_apparent : 1; |
|
|
|
_power_ready = true; |
|
|
|
|
|
|
|
char buf_current[10]; |
|
|
|
dtostrf(_power_current, 6, POWER_CURRENT_PRECISION, buf_current); |
|
|
|
double energy_delta = _power_active * POWER_ENERGY_FACTOR; |
|
|
|
char buf_energy[10]; |
|
|
|
dtostrf(energy_delta, 6, POWER_CURRENT_PRECISION, buf_energy); |
|
|
|
|
|
|
|
{ |
|
|
|
mqttSend(MQTT_TOPIC_CURRENT, buf_current); |
|
|
|
mqttSend(MQTT_TOPIC_POWER_APPARENT, String((int) _power_apparent).c_str()); |
|
|
|
mqttSend(MQTT_TOPIC_ENERGY, buf_energy); |
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
_power_apparent = _filter_apparent.average(true); |
|
|
|
_power_voltage = _filter_voltage.average(true); |
|
|
|
_power_active = _filter_active.average(true); |
|
|
|
double power = _power_active; |
|
|
|
#else
|
|
|
|
_power_apparent = _power_current * _power_voltage; |
|
|
|
double power = _power_apparent; |
|
|
|
mqttSend(MQTT_TOPIC_POWER_ACTIVE, String((int) _power_active).c_str()); |
|
|
|
mqttSend(MQTT_TOPIC_POWER_REACTIVE, String((int) _power_reactive).c_str()); |
|
|
|
mqttSend(MQTT_TOPIC_VOLTAGE, String((int) _power_voltage).c_str()); |
|
|
|
mqttSend(MQTT_TOPIC_POWER_FACTOR, String((int) 100 * _power_factor).c_str()); |
|
|
|
#endif
|
|
|
|
double delta_energy = power * POWER_ENERGY_FACTOR; |
|
|
|
char delta_energy_buffer[10]; |
|
|
|
dtostrf(delta_energy, sizeof(delta_energy_buffer)-1, POWER_CURRENT_PRECISION, delta_energy_buffer); |
|
|
|
_power_ready = true; |
|
|
|
|
|
|
|
// Report values to MQTT broker
|
|
|
|
{ |
|
|
|
mqttSend(MQTT_TOPIC_CURRENT, current_buffer); |
|
|
|
mqttSend(MQTT_TOPIC_APPARENT, String((int) _power_apparent).c_str()); |
|
|
|
mqttSend(MQTT_TOPIC_ENERGY, delta_energy_buffer); |
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
mqttSend(MQTT_TOPIC_POWER, String((int) _power_active).c_str()); |
|
|
|
mqttSend(MQTT_TOPIC_VOLTAGE, String((int) _power_voltage).c_str()); |
|
|
|
#endif
|
|
|
|
} |
|
|
|
|
|
|
|
// Report values to Domoticz
|
|
|
|
#if DOMOTICZ_SUPPORT
|
|
|
|
{ |
|
|
|
char buffer[20]; |
|
|
|
snprintf_P(buffer, sizeof(buffer), PSTR("%d;%s"), power, delta_energy_buffer); |
|
|
|
domoticzSend("dczPowIdx", 0, buffer); |
|
|
|
domoticzSend("dczEnergyIdx", 0, delta_energy_buffer); |
|
|
|
domoticzSend("dczCurrentIdx", 0, current_buffer); |
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
snprintf_P(buffer, sizeof(buffer), PSTR("%d"), _power_voltage); |
|
|
|
domoticzSend("dczVoltIdx", 0, buffer); |
|
|
|
#endif
|
|
|
|
} |
|
|
|
|
|
|
|
} |
|
|
|
#if DOMOTICZ_SUPPORT
|
|
|
|
{ |
|
|
|
char buffer[20]; |
|
|
|
snprintf_P(buffer, sizeof(buffer), PSTR("%d;%s"), _power_active, buf_energy); |
|
|
|
domoticzSend("dczPowIdx", 0, buffer); |
|
|
|
domoticzSend("dczCurrentIdx", 0, buf_current); |
|
|
|
domoticzSend("dczEnergyIdx", 0, buf_energy); |
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
snprintf_P(buffer, sizeof(buffer), PSTR("%d"), _power_voltage); |
|
|
|
domoticzSend("dczVoltIdx", 0, buffer); |
|
|
|
#endif
|
|
|
|
|
|
|
|
#if INFLUXDB_SUPPORT
|
|
|
|
{ |
|
|
|
influxDBSend(MQTT_TOPIC_CURRENT, current_buffer); |
|
|
|
influxDBSend(MQTT_TOPIC_APPARENT, String((int) _power_apparent).c_str()); |
|
|
|
influxDBSend(MQTT_TOPIC_ENERGY, delta_energy_buffer); |
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
influxDBSend(MQTT_TOPIC_POWER, String((int) _power_active).c_str()); |
|
|
|
influxDBSend(MQTT_TOPIC_VOLTAGE, String((int) _power_voltage).c_str()); |
|
|
|
#endif
|
|
|
|
} |
|
|
|
} |
|
|
|
#endif
|
|
|
|
|
|
|
|
#if INFLUXDB_SUPPORT
|
|
|
|
{ |
|
|
|
influxDBSend(MQTT_TOPIC_CURRENT, buf_current); |
|
|
|
influxDBSend(MQTT_TOPIC_POWER_APPARENT, String((int) _power_apparent).c_str()); |
|
|
|
influxDBSend(MQTT_TOPIC_ENERGY, buf_energy); |
|
|
|
#if POWER_HAS_ACTIVE
|
|
|
|
influxDBSend(MQTT_TOPIC_POWER_ACTIVE, String((int) _power_active).c_str()); |
|
|
|
influxDBSend(MQTT_TOPIC_POWER_REACTIVE, String((int) _power_reactive).c_str()); |
|
|
|
influxDBSend(MQTT_TOPIC_VOLTAGE, String((int) _power_voltage).c_str()); |
|
|
|
influxDBSend(MQTT_TOPIC_POWER_FACTOR, String((int) 100 * _power_factor).c_str()); |
|
|
|
#endif
|
|
|
|
} |
|
|
|
#endif
|
|
|
|
|
|
|
|
} |
|
|
|
|
|
|
|
void powerSetup() { |
|
|
|
|
|
|
|
// backwards compatibility
|
|
|
|
moveSetting("pwMainsVoltage", "powerVoltage"); |
|
|
|
moveSetting("emonMains", "powerVoltage"); |
|
|
|
moveSetting("emonVoltage", "powerVoltage"); |
|
|
|
moveSetting("pwCurrentRatio", "powerRatioC"); |
|
|
|
moveSetting("emonRatio", "powerRatioC"); |
|
|
|
moveSetting("powPowerMult", "powerRatioP"); |
|
|
|
moveSetting("powCurrentMult", "powerRatioC"); |
|
|
|
moveSetting("powVoltageMult", "powerRatioV"); |
|
|
|
|
|
|
|
powerSetupProvider(); |
|
|
|
|
|
|
|
// API
|
|
|
|
#if WEB_SUPPORT
|
|
|
|
_powerAPISetup(); |
|
|
|
#endif
|
|
|
|
|
|
|
|
DEBUG_MSG_P(PSTR("[POWER] POWER_PROVIDER = %d\n"), POWER_PROVIDER); |
|
|
|
|
|
|
|
} |
|
|
|
|
|
|
|
void powerLoop() { |
|
|
|
|
|
|
|
powerLoopProvider(true); |
|
|
|
|
|
|
|
if (_power_newdata) { |
|
|
|
_power_newdata = false; |
|
|
|
powerRead(); |
|
|
|
} |
|
|
|
|
|
|
|
// Toggle between current and voltage monitoring
|
|
|
|
#if (POWER_PROVIDER == POWER_PROVIDER_HLW8012) && (HLW8012_USE_INTERRUPTS == 0)
|
|
|
|
_hlw8012.toggleMode(); |
|
|
|
#endif // (POWER_PROVIDER == POWER_PROVIDER_HLW8012) && (HLW8012_USE_INTERRUPTS == 0)
|
|
|
|
static unsigned long last = 0; |
|
|
|
if (millis() - last > POWER_REPORT_INTERVAL) { |
|
|
|
last = millis(); |
|
|
|
powerReport(); |
|
|
|
} |
|
|
|
|
|
|
|
powerLoopProvider(false); |
|
|
|
|
|
|
|
} |
|
|
|
|
|
|
|
#endif // POWER_PROVIDER != POWER_PROVIDER_NONE
|