Merge branch 'dev' into webupgrade

Conflicts:
	code/espurna/data/index.html.gz
	code/espurna/static/index.html.gz.h

code/espurna/config/arduino.h

@@ -32,6 +32,8 @@
 //#define SONOFF_SV
 //#define SONOFF_POW
 //#define SONOFF_DUAL
+//#define ITEAD_1CH_INCHING
+//#define ITEAD_MOTOR
 //#define SONOFF_4CH
 //#define ESP_RELAY_BOARD
 //#define ECOPLUG

code/espurna/config/general.h

@@ -146,22 +146,22 @@
 #define MQTT_SKIP_RETAINED      1
 #define MQTT_SKIP_TIME          1000
 
-#define MQTT_TOPIC_ACTION       "/action"
-#define MQTT_TOPIC_RELAY        "/relay"
-#define MQTT_TOPIC_LED          "/led"
-#define MQTT_TOPIC_COLOR        "/color"
-#define MQTT_TOPIC_BUTTON       "/button"
-#define MQTT_TOPIC_IP           "/ip"
-#define MQTT_TOPIC_VERSION      "/version"
-#define MQTT_TOPIC_UPTIME       "/uptime"
-#define MQTT_TOPIC_FREEHEAP     "/freeheap"
-#define MQTT_TOPIC_VCC          "/vcc"
-#define MQTT_TOPIC_STATUS       "/status"
-#define MQTT_TOPIC_MAC          "/mac"
-#define MQTT_TOPIC_RSSI         "/rssi"
-#define MQTT_TOPIC_APP          "/app"
-#define MQTT_TOPIC_INTERVAL     "/interval"
-#define MQTT_TOPIC_HOSTNAME     "/hostname"
+#define MQTT_TOPIC_ACTION       "action"
+#define MQTT_TOPIC_RELAY        "relay"
+#define MQTT_TOPIC_LED          "led"
+#define MQTT_TOPIC_COLOR        "color"
+#define MQTT_TOPIC_BUTTON       "button"
+#define MQTT_TOPIC_IP           "ip"
+#define MQTT_TOPIC_VERSION      "version"
+#define MQTT_TOPIC_UPTIME       "uptime"
+#define MQTT_TOPIC_FREEHEAP     "freeheap"
+#define MQTT_TOPIC_VCC          "vcc"
+#define MQTT_TOPIC_STATUS       "status"
+#define MQTT_TOPIC_MAC          "mac"
+#define MQTT_TOPIC_RSSI         "rssi"
+#define MQTT_TOPIC_APP          "app"
+#define MQTT_TOPIC_INTERVAL     "interval"
+#define MQTT_TOPIC_HOSTNAME     "hostname"
 
 // Periodic reports
 #define MQTT_REPORT_STATUS      1

code/espurna/config/hardware.h

@@ -44,6 +44,23 @@
 	#define LED1_PIN            2
     #define LED1_PIN_INVERSE    1
 
+// -----------------------------------------------------------------------------
+// ESPurna
+// -----------------------------------------------------------------------------
+
+#elif defined(ESPURNA_H)
+
+    #define MANUFACTURER        "TINKERMAN"
+    #define DEVICE              "ESPURNA_H"
+    #define RELAY1_PIN          12
+    #define RELAY1_PIN_INVERSE  1
+    #define LED1_PIN            5
+    #define LED1_PIN_INVERSE    0
+    #define BUTTON1_PIN         4
+    #define BUTTON1_RELAY       1
+    #define BUTTON1_MODE        BUTTON_SWITCH
+    #define ENABLE_POW          1
+
 // -----------------------------------------------------------------------------
 // Itead Studio boards
 // -----------------------------------------------------------------------------
@@ -248,8 +265,8 @@
 
 #elif defined(AI_LIGHT)
 
-    #define MANUFACTURER        "AI THINKER"
-    #define DEVICE              "AI LIGHT"
+    #define MANUFACTURER        "AI_THINKER"
+    #define DEVICE              "AI_LIGHT"
     #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
     #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY9192
 
@@ -259,8 +276,8 @@
 
 #elif defined(LED_CONTROLLER)
 
-    #define MANUFACTURER        "MAGIC HOME"
-    #define DEVICE              "LED CONTROLLER"
+    #define MANUFACTURER        "MAGIC_HOME"
+    #define DEVICE              "LED_CONTROLLER"
     #define LED1_PIN            2
     #define LED1_PIN_INVERSE    1
     #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

code/espurna/config/prototypes.h

@@ -11,6 +11,8 @@ void apiRegister(const char * url, const char * key, apiGetCallbackFunction getF
 void mqttRegister(void (*callback)(unsigned int, const char *, const char *));
 String mqttSubtopic(char * topic);
 template<typename T> bool setSetting(const String& key, T value);
+template<typename T> bool setSetting(const String& key, unsigned int index, T value);
 template<typename T> String getSetting(const String& key, T defaultValue);
+template<typename T> String getSetting(const String& key, unsigned int index, T defaultValue);
 template<typename T> void domoticzSend(const char * key, T value);
 template<typename T> void domoticzSend(const char * key, T nvalue, const char * svalue);

code/espurna/debug.ino

@@ -20,16 +20,22 @@ void debugSend(const char * format, ...) {
 
     va_list args;
     va_start(args, format);
-    ets_vsnprintf(buffer, DEBUG_MESSAGE_MAX_LENGTH, format, args);
+    int len = ets_vsnprintf(buffer, DEBUG_MESSAGE_MAX_LENGTH, format, args);
     va_end(args);
 
     #ifdef DEBUG_PORT
         DEBUG_PORT.printf(buffer);
+        if (len > DEBUG_MESSAGE_MAX_LENGTH) {
+            DEBUG_PORT.printf(" (...)\n");
+        }
     #endif
 
     #ifdef DEBUG_UDP_IP
         udpDebug.beginPacket(DEBUG_UDP_IP, DEBUG_UDP_PORT);
         udpDebug.write(buffer);
+        if (len > DEBUG_MESSAGE_MAX_LENGTH) {
+            udpDebug.write(" (...)\n");
+        }
         udpDebug.endPacket();
     #endif
 
@@ -37,23 +43,29 @@ void debugSend(const char * format, ...) {
 
 void debugSend_P(PGM_P format, ...) {
 
-    char buffer[DEBUG_MESSAGE_MAX_LENGTH+1];
-
     char f[DEBUG_MESSAGE_MAX_LENGTH+1];
     memcpy_P(f, format, DEBUG_MESSAGE_MAX_LENGTH);
 
+    char buffer[DEBUG_MESSAGE_MAX_LENGTH+1];
+
     va_list args;
     va_start(args, format);
-    ets_vsnprintf(buffer, DEBUG_MESSAGE_MAX_LENGTH, f, args);
+    int len = ets_vsnprintf(buffer, DEBUG_MESSAGE_MAX_LENGTH, f, args);
     va_end(args);
 
     #ifdef DEBUG_PORT
         DEBUG_PORT.printf(buffer);
+        if (len > DEBUG_MESSAGE_MAX_LENGTH) {
+            DEBUG_PORT.printf(" (...)\n");
+        }
     #endif
 
     #ifdef DEBUG_UDP_IP
         udpDebug.beginPacket(DEBUG_UDP_IP, DEBUG_UDP_PORT);
         udpDebug.write(buffer);
+        if (len > DEBUG_MESSAGE_MAX_LENGTH) {
+            udpDebug.write(" (...)\n");
+        }
         udpDebug.endPacket();
     #endif
 

code/espurna/espurna.ino

@@ -197,6 +197,9 @@ void setup() {
         powerMonitorSetup();
     #endif
 
+    // Prepare configuration for version 2.0
+    hwUpwardsCompatibility();
+
 }
 
 void loop() {

code/espurna/hardware.ino

@@ -0,0 +1,269 @@
+/*
+
+HARDWARE MODULE
+
+Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
+
+*/
+
+/*
+
+The goal of this file is to store board configuration values in EEPROM so
+the migration to future version 2 will be straigh forward.
+
+*/
+
+
+#define RELAY_PROVIDER_RELAY    0
+#define RELAY_PROVIDER_DUAL     1
+#define RELAY_PROVIDER_LIGHT    2
+
+#define LIGHT_PROVIDER_NONE     0
+#define LIGHT_PROVIDER_WS2812   1
+#define LIGHT_PROVIDER_RGB      2
+#define LIGHT_PROVIDER_RGBW     3
+#define LIGHT_PROVIDER_MY9192   4
+
+void hwUpwardsCompatibility() {
+
+    unsigned int board = getSetting("board", 0).toInt();
+    if (board > 0) return;
+
+    #if NODEMCUV2
+        setSetting("board", 2);
+        setSetting("ledGPIO", 1, 2);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if D1_RELAYSHIELD
+        setSetting("board", 3);
+        setSetting("ledGPIO", 1, 2);
+        setSetting("ledLogic", 1, 1);
+        setSetting("relayGPIO", 1, 5);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if SONOFF
+        setSetting("board", 4);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if SONOFF_TH
+        setSetting("board", 5);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if SONOFF_SV
+        setSetting("board", 6);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if SONOFF_TOUCH
+        setSetting("board", 7);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if SONOFF_POW
+        setSetting("board", 8);
+        setSetting("ledGPIO", 1, 15);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if SONOFF_DUAL
+        setSetting("board", 9);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnRelay", 3, 1);
+        setSetting("relayProvider", RELAY_PROVIDER_DUAL);
+    #endif
+
+    #if ITEAD_1CH_INCHING
+        setSetting("board", 10);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if SONOFF_4CH
+        setSetting("board", 11);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnGPIO", 2, 9);
+        setSetting("btnGPIO", 3, 10);
+        setSetting("btnGPIO", 4, 14);
+        setSetting("btnRelay", 1, 2);
+        setSetting("btnRelay", 2, 3);
+        setSetting("btnRelay", 3, 4);
+        setSetting("btnRelay", 4, 0);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayGPIO", 2, 5);
+        setSetting("relayGPIO", 3, 4);
+        setSetting("relayGPIO", 4, 15);
+        setSetting("relayLogic", 1, 0);
+        setSetting("relayLogic", 2, 0);
+        setSetting("relayLogic", 3, 0);
+        setSetting("relayLogic", 4, 0);
+    #endif
+
+    #if SLAMPHER
+        setSetting("board", 12);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if S20
+        setSetting("board", 13);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if ESP_RELAY_BOARD
+        setSetting("board", 14);
+        setSetting("ledGPIO", 1, 16);
+        setSetting("ledLogic", 1, 0);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnGPIO", 2, 2);
+        setSetting("btnRelay", 1, 1);
+        setSetting("btnRelay", 2, 2);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayGPIO", 2, 13);
+        setSetting("relayLogic", 1, 0);
+        setSetting("relayLogic", 2, 0);
+    #endif
+
+    #if ECOPLUG
+        setSetting("board", 15);
+        setSetting("ledGPIO", 1, 2);
+        setSetting("ledLogic", 1, 0);
+        setSetting("btnGPIO", 1, 13);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 15);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if WIFI_RELAY_NC
+        setSetting("board", 16);
+        setSetting("btnGPIO", 1, 12);
+        setSetting("btnGPIO", 2, 13);
+        setSetting("btnRelay", 1, 1);
+        setSetting("btnRelay", 2, 2);
+        setSetting("relayGPIO", 1, 2);
+        setSetting("relayGPIO", 2, 14);
+        setSetting("relayLogic", 1, 1);
+        setSetting("relayLogic", 2, 1);
+    #endif
+
+    #if WIFI_RELAY_NO
+        setSetting("board", 17);
+        setSetting("btnGPIO", 1, 12);
+        setSetting("btnGPIO", 2, 13);
+        setSetting("btnRelay", 1, 1);
+        setSetting("btnRelay", 2, 2);
+        setSetting("relayGPIO", 1, 2);
+        setSetting("relayGPIO", 2, 14);
+        setSetting("relayLogic", 1, 0);
+        setSetting("relayLogic", 2, 0);
+    #endif
+
+    #if MQTT_RELAY
+        setSetting("board", 18);
+        setSetting("ledGPIO", 1, 16);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if WIFI_RELAYS_BOARD_KIT
+        setSetting("board", 19);
+        setSetting("relayGPIO", 1, 0);
+        setSetting("relayLogic", 1, 1);
+        setSetting("relayGPIO", 2, 2);
+        setSetting("relayLogic", 2, 1);
+    #endif
+
+    #if AI_LIGHT
+        setSetting("board", 20);
+        setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+        setSetting("lightProvider", LIGHT_PROVIDER_MY9192);
+        setSetting("myDIGPIO", 13);
+        setSetting("myDCKIGPIO", 15);
+    #endif
+
+    #if LED_CONTROLLER
+        setSetting("board", 21);
+        setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+        setSetting("lightProvider", LIGHT_PROVIDER_RGB);
+        setSetting("ledGPIO", 1, 2);
+        setSetting("ledLogic", 1, 1);
+        setSetting("redGPIO", 14);
+        setSetting("greenGPIO", 5);
+        setSetting("blueGPIO", 12);
+        setSetting("whiteGPIO", 13);
+        setSetting("lightLogic", 1);
+    #endif
+
+    #if ITEAD_MOTOR
+        setSetting("board", 22);
+        setSetting("ledGPIO", 1, 13);
+        setSetting("ledLogic", 1, 1);
+        setSetting("btnGPIO", 1, 0);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 0);
+    #endif
+
+    #if ESPURNA_H
+        setSetting("board", 23);
+        setSetting("ledGPIO", 1, 5);
+        setSetting("ledLogic", 1, 0);
+        setSetting("btnGPIO", 1, 4);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayLogic", 1, 1);
+    #endif
+
+    saveSettings();
+
+}

code/espurna/light.ino

@@ -158,6 +158,24 @@ void lightMQTTCallback(unsigned int type, const char * topic, const char * paylo
 
 }
 
+//------------------------------------------------------------------------------
+// REST API
+//------------------------------------------------------------------------------
+
+void lightSetupAPI() {
+
+    // API entry points (protected with apikey)
+    apiRegister("/api/color", "color",
+        [](char * buffer, size_t len) {
+			snprintf(buffer, len, "%s", lightColor().c_str());
+        },
+        [](const char * payload) {
+            lightColor(payload, true, mqttForward());
+        }
+    );
+
+}
+
 // -----------------------------------------------------------------------------
 // SETUP
 // -----------------------------------------------------------------------------
@@ -169,6 +187,8 @@ void lightSetup() {
     #endif
 
     #if (LIGHT_PROVIDER == LIGHT_PROVIDER_RGB) || (LIGHT_PROVIDER == LIGHT_PROVIDER_RGBW)
+        analogWriteRange(255);
+        analogWriteFreq(1000);
         pinMode(RGBW_RED_PIN, OUTPUT);
         pinMode(RGBW_GREEN_PIN, OUTPUT);
         pinMode(RGBW_BLUE_PIN, OUTPUT);
@@ -181,6 +201,7 @@ void lightSetup() {
     lightColorRetrieve();
 
     mqttRegister(lightMQTTCallback);
+    lightSetupAPI();
 
 }
 

code/espurna/mqtt.ino

@@ -47,6 +47,7 @@ void buildTopics() {
     // Replace identifier
     mqttTopic = getSetting("mqttTopic", MQTT_TOPIC);
     mqttTopic.replace("{identifier}", getSetting("hostname"));
+    if (!mqttTopic.endsWith("/")) mqttTopic = mqttTopic + "/";
 }
 
 bool mqttForward() {

code/espurna/settings.ino

@@ -172,12 +172,22 @@ void settingsLoop() {
     embedis.process();
 }
 
+void moveSetting(const char * from, const char * to) {
+    String value = getSetting(from);
+    if (value.length() > 0) setSetting(to, value);
+    delSetting(from);
+}
+
 template<typename T> String getSetting(const String& key, T defaultValue) {
     String value;
     if (!Embedis::get(key, value)) value = String(defaultValue);
     return value;
 }
 
+template<typename T> String getSetting(const String& key, unsigned int index, T defaultValue) {
+    return getSetting(key + String(index), defaultValue);
+}
+
 String getSetting(const String& key) {
     return getSetting(key, "");
 }
@@ -186,10 +196,26 @@ template<typename T> bool setSetting(const String& key, T value) {
     return Embedis::set(key, String(value));
 }
 
+template<typename T> bool setSetting(const String& key, unsigned int index, T value) {
+    return setSetting(key + String(index), value);
+}
+
 bool delSetting(const String& key) {
     return Embedis::del(key);
 }
 
+bool delSetting(const String& key, unsigned int index) {
+    return delSetting(key + String(index));
+}
+
+bool hasSetting(const String& key) {
+    return getSetting(key).length() != 0;
+}
+
+bool hasSetting(const String& key, unsigned int index) {
+    return getSetting(key, index, "").length() != 0;
+}
+
 void saveSettings() {
     DEBUG_MSG_P(PSTR("[SETTINGS] Saving\n"));
     #if not AUTO_SAVE

code/html/index.html

@@ -455,13 +455,13 @@
                                     <input class="pure-u-1 pure-u-md-3-4" name="mqttTopic" type="text" size="20" tabindex="25" />
                                     <div class="pure-u-0 pure-u-md-1-4">&nbsp;</div>
                                     <div class="pure-u-1 pure-u-md-3-4 hint">
-                                        This is the root topic for this device. The {identifier} placeholder will be replaces by the device hostname.<br />
-                                        - <strong>&lt;root&gt;/relay/#</strong> Send a 0 or a 1 as a payload to this topic to switch it on or off. You can also send a 2 to toggle its current state. Replace # with the switch ID (starting from 0). If the board has only one switch it will be 0.<br />
-                                        - <strong>&lt;root&gt;/led/#</strong> Send a 0 or a 1 as a payload to this topic to set the onboard LED to the given state, send a 3 to turn it back to WIFI indicator. Replace # with the LED ID (starting from 0). If the board has only one LED it will be 0.<br />
-                                        - <strong>&lt;root&gt;/button/#</strong> For each button in the board subscribe to this topic to know when it is pressed (payload 1) or released (payload 0).<br />
-                                        - <strong>&lt;root&gt;/ip</strong> The device will report to this topic its IP.<br />
-                                        - <strong>&lt;root&gt;/version</strong> The device will report to this topic its firmware version on boot.<br />
-                                        - <strong>&lt;root&gt;/status</strong> The device will report a 1 to this topic every few minutes. Upon MQTT disconnecting this will be set to 0.
+                                        This is the root topic for this device. A trailing slash will be added if not preset. The {identifier} placeholder will be replaces by the device hostname.<br />
+                                        - <strong>&lt;root/&gt;relay/#</strong> Send a 0 or a 1 as a payload to this topic to switch it on or off. You can also send a 2 to toggle its current state. Replace # with the switch ID (starting from 0). If the board has only one switch it will be 0.<br />
+                                        <span class="module module-color">- <strong>&lt;root&gt;color</strong> The device will report the current color in #RRGGBB format to this topic. You can also set the color using this same topic.<br /></span>
+                                        - <strong>&lt;root/&gt;led/#</strong> Send a 0 or a 1 as a payload to this topic to set the onboard LED to the given state, send a 3 to turn it back to WIFI indicator. Replace # with the LED ID (starting from 0). If the board has only one LED it will be 0.<br />
+                                        - <strong>&lt;root/&gt;button/#</strong> For each button in the board subscribe to this topic to know when it is pressed (payload 1) or released (payload 0).<br />
+                                        - <strong>&lt;root/&gt;status</strong> The device will report a 1 to this topic every few minutes. Upon MQTT disconnecting this will be set to 0.<br />
+                                        - Other values reported (depending on the build) are: <strong>firmware</strong> and <strong>version</strong>, <strong>hostname</strong>, <strong>IP</strong>, <strong>MAC</strong>, signal strenth (<strong>RSSI</strong>), <strong>uptime</strong> (in seconds), <strong>free heap</strong> and <strong>power supply</strong>.
                                     </div>
                                 </div>
 

code/platformio.ini

@@ -82,6 +82,15 @@ upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 
+[env:espurna-debug]
+platform = espressif8266
+framework = arduino
+board = esp12e
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+extra_script = pio_hooks.py
+build_flags = ${common.build_flags} -DESPURNA_H
+
 [env:sonoff-debug]
 platform = espressif8266
 framework = arduino