two new devices

new devices:
esp dht11 & ds18b20 boards

renamed flags to make more sense.

README.md

@@ -239,6 +239,8 @@ Here is the list of supported hardware. For more information please refer to the
 |**IKE ESPike**|**STM_RELAY**|**Arniex Swifitch**|
 |![Heltec Touch Relay](images/devices/heltec-touch-relay.jpg)|![Generic Relay v4.0](images/devices/generic-relay-40.jpg)|![Generic RGBLed v1.0](images/devices/generic-rgbled-10.jpg)|
 |**Heltec Touch Relay**|**Generic Relay v4.0**|**Generic RGBLed v1.0**|
+|![Generic DHT11 v1.0](images/devices/generic-dht11-10.jpg)|![Generic DS18B20 v1.0](images/devices/generic-ds18b20-10.jpg)||
+|**Generic DHT11 v1.0**|**Generic DS18B20 v1.0**||
 
 **Other supported boards:**
 *TODO*

code/espurna/config/arduino.h

@@ -72,8 +72,10 @@
 //#define GREEN_ESP8266RELAY
 //#define IKE_ESPIKE
 //#define ARNIEX_SWIFITCH
-//#define GENERIC_ESP01SRELAY40
-//#define GENERIC_ESP01SRGBLED10
+//#define GENERIC_ESP01S_RELAY_V40
+//#define GENERIC_ESP01S_RGBLED_V10
+//#define GENERIC_ESP01S_DHT11_V10
+//#define GENERIC_ESP01S_DS18B20_V10
 //#define HELTEC_TOUCHRELAY
 
 //--------------------------------------------------------------------------------

code/espurna/config/hardware.h

@@ -1223,7 +1223,7 @@
     #define RELAY1_TYPE         RELAY_TYPE_NORMAL
     #define RELAY2_TYPE         RELAY_TYPE_NORMAL
 
-    // DB18B20
+    // DS18B20
     #ifndef DALLAS_SUPPORT
     #define DALLAS_SUPPORT             	1
     #endif
@@ -1829,7 +1829,7 @@
 // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404024035&SearchText=esp-01s+relay
 // -----------------------------------------------------------------------------
 
-#elif defined(GENERIC_ESP01SRELAY40)
+#elif defined(GENERIC_ESP01S_RELAY_V40)
 
     // Info
     #define MANUFACTURER        "GENERIC"
@@ -1848,7 +1848,7 @@
 // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404023816&SearchText=esp-01s+led+controller
 // -----------------------------------------------------------------------------
 
-#elif defined(GENERIC_ESP01SRGBLED10)
+#elif defined(GENERIC_ESP01S_RGBLED_V10)
 
     // Info
     #define MANUFACTURER        "GENERIC"
@@ -1866,6 +1866,41 @@
     // LEDs
     #define LED1_PIN            2
 
+
+// -----------------------------------------------------------------------------
+// ESP-01S DHT11 v1.0
+// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105907&SearchText=esp-01s+dht11
+// -----------------------------------------------------------------------------
+
+#elif defined(GENERIC_ESP01S_DHT11_V10)
+
+    // Info
+    #define MANUFACTURER        "GENERIC"
+    #define DEVICE              "ESP01S_DHT11_10"
+
+    // DHT11
+    #ifndef DHT_SUPPORT
+    #define DHT_SUPPORT         1
+    #endif
+    #define DHT_PIN             2
+
+// -----------------------------------------------------------------------------
+// ESP-01S DS18B20 v1.0
+// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105933&SearchText=esp-01s+ds18b20
+// -----------------------------------------------------------------------------
+
+#elif defined(GENERIC_ESP01S_DS18B20_V10)
+
+    // Info
+    #define MANUFACTURER        "GENERIC"
+    #define DEVICE              "ESP01S_DS18B20_10"
+
+    // DB18B20
+    #ifndef DALLAS_SUPPORT
+    #define DALLAS_SUPPORT      1
+    #endif
+    #define DALLAS_PIN          2
+
 // -----------------------------------------------------------------------------
 // Heltec Touch Relay
 // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180408043114&SearchText=esp8266+touch+relay

code/espurna/migrate.ino

@@ -859,7 +859,7 @@ void migrate() {
             setSetting("relayGPIO", 0, 5);
             setSetting("relayType", 0, RELAY_TYPE_INVERSE);
 
-        #elif defined(GENERIC_ESP01SRELAY40)
+        #elif defined(GENERIC_ESP01S_RELAY_V40)
 
             setSetting("board", 65);
             setSetting("ledGPIO", 0, 2);
@@ -867,7 +867,7 @@ void migrate() {
             setSetting("relayGPIO", 0, 0);
             setSetting("relayType", 0, RELAY_TYPE_NORMAL);
 
-        #elif defined(GENERIC_ESP01SRGBLED10)
+        #elif defined(GENERIC_ESP01S_RGBLED_V10)
 
             setSetting("board", 66);
             setSetting("ledGPIO", 0, 2);
@@ -880,6 +880,14 @@ void migrate() {
             setSetting("relayGPIO", 0, 12);
             setSetting("relayType", 0, RELAY_TYPE_NORMAL);
 
+        #elif defined(GENERIC_ESP01S_DHT11_V10)
+
+            setSetting("board", 68);
+
+        #elif defined(GENERIC_ESP01S_DS18B20_V10)
+
+            setSetting("board", 69);
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -1881,7 +1881,7 @@ board = esp01_1m
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRELAY40
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_RELAY_V40
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1892,7 +1892,7 @@ board = esp01_1m
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRELAY40
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_RELAY_V40
 upload_speed = 115200
 upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
@@ -1905,7 +1905,7 @@ board = esp01_1m
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRGBLED10
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_RGBLED_V10
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1916,7 +1916,55 @@ board = esp01_1m
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRGBLED10
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_RGBLED_V10
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
+
+[env:generic-esp01s-dht11-10]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_DHT11_V10
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:generic-esp01s-dht11-10-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_DHT11_V10
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
+
+[env:generic-esp01s-ds18b20-10]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_DS18B20_V10
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:generic-esp01s-ds18b20-10-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01S_DS18B20_V10
 upload_speed = 115200
 upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266