Added support for MagicHome LED Controller 2.3

code/espurna/config/arduino.h

@@ -59,6 +59,7 @@
 //#define ARILUX_AL_LC11
 //#define ARILUX_AL_LC02
 //#define WEMOS_D1_TARPUNA_SHIELD
+//#define MAGICHOME_LED_CONTROLLER_23
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -914,6 +914,35 @@
     #define IR_PIN              4
     #define IR_BUTTON_SET       1
 
+#elif defined(MAGICHOME_LED_CONTROLLER_23)
+
+    // Info
+    #define MANUFACTURER        "MAGICHOME"
+    #define DEVICE              "LED_CONTROLLER_23"
+    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT   1
+
+    // LEDs
+    #define LED1_PIN            2
+    #define LED1_PIN_INVERSE    1
+
+    // Light
+    #define LIGHT_CHANNELS      4
+    #define LIGHT_CH1_PIN       12      // RED
+    #define LIGHT_CH2_PIN       5       // GREEN
+    #define LIGHT_CH3_PIN       13      // BLUE
+    #define LIGHT_CH4_PIN       15      // WHITE
+    #define LIGHT_CH1_INVERSE   0
+    #define LIGHT_CH2_INVERSE   0
+    #define LIGHT_CH3_INVERSE   0
+    #define LIGHT_CH4_INVERSE   0
+
+    // IR
+    #define IR_SUPPORT          1
+    #define IR_PIN              4
+    #define IR_BUTTON_SET       1
+
 // -----------------------------------------------------------------------------
 // HUACANXING H801 & H802
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -698,6 +698,21 @@ void migrate() {
             setSetting("chLogic", 3, 0);
             setSetting("relays", 1);
 
+        #elif defined(MAGICHOME_LED_CONTROLLER_23)
+
+            setSetting("board", 53);
+            setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+            setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
+            setSetting("chGPIO", 0, 12);
+            setSetting("chGPIO", 1, 5);
+            setSetting("chGPIO", 2, 13);
+            setSetting("chGPIO", 3, 15);
+            setSetting("chLogic", 0, 0);
+            setSetting("chLogic", 1, 0);
+            setSetting("chLogic", 2, 0);
+            setSetting("chLogic", 3, 0);
+            setSetting("relays", 1);
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -882,6 +882,30 @@ upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
+[env:magichome-led-controller-23]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER_23
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:magichome-led-controller-23-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER_23
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
 [env:huacanxing-h801]
 platform = ${common.platform}
 framework = arduino