- Fixed InfluxDB sensor by id ([#882](https://github.com/xoseperez/espurna/issues/882))
- Fix build when disabling WEB_SUPPORT ([#923](https://github.com/xoseperez/espurna/issues/923))
- Fix calibration error in EmonSensor ([#876](https://github.com/xoseperez/espurna/issues/876))
- Fix telnet and web debug responsiveness ([#896](https://github.com/xoseperez/espurna/issues/896))
- Use double quotes in JSON for non-numeric values ([#929](https://github.com/xoseperez/espurna/issues/929))
- Support connections over HTTPS via proxy ([#937](https://github.com/xoseperez/espurna/issues/937))
### Added
- EEPROM sector rotation using EEPROM_Rotate library
- Code filtering when building web UI images
- Added pulsing a relay via MQTT and REST API ([#896](https://github.com/xoseperez/espurna/issues/896), [#902](https://github.com/xoseperez/espurna/issues/902))
- Support for WPS (not available in pre-built binaries)
- Support for Smart Config (not available in pre-built binaries)
- Support for CCT lights (thanks to @Skaronator)
- Allow RELAYx_DELAY_ON/OFF also for none GPIO relay types (thanks to @zafrirron)
- Added relay status to Domoticz on MQTT connection ([#872](https://github.com/xoseperez/espurna/issues/872))
- Added configurable UART-to-MQTT terminator
- Added telnet link to web UI
- Reload terminal command to force all modules to reload settings from config ([#816](https://github.com/xoseperez/espurna/issues/816))
- Added security headers to each HTTP response (thanks to @ITNerdBox)
- Customized GET terminal command (thanks to @mcspr)
- More RC codes supported on TX for RF Bridge (thanks to @wildwiz)
- Support for BL0937 power monitoring chip with unmodified HLW8012 library ([#737](https://github.com/xoseperez/espurna/issues/737))
- Enable CORS
- Support for Allnet ESP8266 UP Relay (thanks to @bajo)
- Support for Tonbux Mosquito Killer (thanks to @gn0st1c)
- Support for Neo Coolcam NAS-WR01W WiFi Smart Power Plug
- Support for TYWE3S-based Estink WiFi Power Strip (thanks to @sandman, [#852](https://github.com/xoseperez/espurna/issues/852))
- Support for Pilotak ESP DIN V1
- Support for DIY Geiger counter (thanks to @Trickx)
* **BMP280** and **BME280** temperature, humidity (BME280) and pressure sensor by Bosch
* **TMP35** and **TMP36** analog temperature sensors
* **SI7021** temperature and humidity sensor
* **SHT3X** temperature and humidity sensor over I2C (Wemos shield)
* **AM2320** temperature and humidity sensor over I2C
@ -80,17 +82,21 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
* **PMSX003/PMS5003T/ST** dust sensors
* **BH1750** luminosity sensor
* **GUVAS12SD** UV sensor
* **GEIGER COUNTER** by RH Electronics
* Power monitoring
* **HLW8012** using the [HLW8012 Library](https://bitbucket.org/xoseperez/hlw8012) (Sonoff POW)
* Non-invasive **current sensor** using **internal ADC** or **ADC121** or **ADS1115**
* **ECH1560** power monitor chip
* **CSE7766** and **CSE7759B** power monitor chips
* **HJL-01** and **BL0937** power monitor chips
* Non-invasive **current sensor** using **internal ADC** or **ADC712** or **ADC121** or **ADS1115**
* **V9261F** power monitor chip
* **PZEM0004T** power monitor board
* Raw analog and digital sensors
* Simple pulse counter
* Support for (almost) any UART based sensor via the **UART-to-MQTT module**
* Support for different units (Fahrenheit or Celsius, Watts or Kilowatts, Joules or kWh)
* Support for LED lights
* MY92XX-based light bulbs and PWM LED strips (dimmers) up to 5 channels (RGB, cold white and warm white, for instance)
* Support for CCT lights
* RGB and HSV color codes supported
* Manage channels individually
* Temperature color supported (in [mired](https://en.wikipedia.org/wiki/Mired) and [kelvin](https://en.wikipedia.org/wiki/Color_temperature)) via MQTT / REST API
@ -100,7 +106,7 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
* Option to have separate switches for each channel
* Support for simple 433MHz RF receivers
* Support for UART-to-MQTT bidirectional bridge
* Fast asynchronous **HTTP Server**
* Fast asynchronous **HTTP Server** and cool **Web User Interface**
* Configurable port
* Basic authentication
* Web-based configuration
@ -111,7 +117,7 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
* Upgrade firmware from the web interface
* Works great behind a [secured reverse proxy](http://tinkerman.cat/secure-remote-access-to-your-iot-devices/)
* **REST API** (enable/disable from web interface)
* GET and PUT relay status
* GET and PUT relay status (including pulses)
* Change light color (for supported hardware)
* GET sensor data (power, current, voltage, temperature and humidity) depending on the available hardware
* Works great behind a secured reverse proxy
@ -140,6 +146,7 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
* Long click (>1 second) to reboot device (only main button)
* Extra long click (>10 seconds) to go back to factory settings (only main button)
* Specific definitions for touch button devices (ESPurna Switch, Sonoff Touch & T1)
* Configuration stored in different sectors to prevent data loosing and corruption
## Notices
@ -204,53 +211,56 @@ Here is the list of supported hardware. For more information please refer to the
||||
|**Itead S20**|**WorkChoice EcoPlug**|**Power meters based on V9261F and ECH1560**|
||||
|**Itead Sonoff S31**|**Blitzwolf BW-SHP2<br/>(also by HomeCube, Coosa, Goosund)**|**Power meters based on V9261F**|
||||
|**Tonbux PowerStrip02**|**Fornorm Power Strip**|**Zhilde ZLD-EU55-W**|
Xose Pérez
6 years ago
