Add support for Xenon SM-PW702U Wifi Smart Outlet

code/.gitignore

@@ -1,4 +1,5 @@
-.clang_complete
-.gcc-flags.json
-.pioenvs
-.piolibdeps
+.clang_complete
+.gcc-flags.json
+.pioenvs
+.piolibdeps
+.vscode/c_cpp_properties.json

code/.vscode/launch.json

@@ -0,0 +1,14 @@
+{
+    "version": "0.2.0",
+    "configurations": [
+        {
+            "type": "gdb",
+            "request": "launch",
+            "cwd": "${workspaceRoot}",
+            "name": "PlatformIO Debugger",
+            "target": "c:/Users/Josh/espdev/espurna/code/.pioenvs/nodemcu-lolin/firmware.elf",
+            "gdbpath": "C:/Users/Josh/.platformio/penv/Scripts/piodebuggdb",
+            "autorun": [ "source .pioinit" ]
+        }
+    ]
+}

code/espurna/config/arduino.h

@@ -49,6 +49,7 @@
 //#define MANCAVEMADE_ESPLIVE
 //#define INTERMITTECH_QUINLED
 //#define ARILUX_AL_LC06
+//#define SM_PW702U
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -1113,6 +1113,29 @@
     #define LIGHT_CH4_INVERSE   0
     #define LIGHT_CH5_INVERSE   0
 
+// -----------------------------------------------------------------------------
+// XENON SM-PW701U
+// -----------------------------------------------------------------------------
+
+#elif defined(SM_PW702U)
+
+    // Info
+    #define MANUFACTURER        "XENON"
+    #define DEVICE              "SM-PW702U"
+
+    // Buttons
+    #define BUTTON1_PIN         13
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY       1
+
+    // Relays
+    #define RELAY1_PIN          12
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+
+    // LEDs
+    #define LED1_PIN            4
+    #define LED1_PIN_INVERSE    1
+
 // -----------------------------------------------------------------------------
 // Unknown hardware
 // -----------------------------------------------------------------------------

code/espurna/hardware.ino

@@ -531,6 +531,16 @@ void hwUpwardsCompatibility() {
         setSetting("chLogic", 5, 0);
         setSetting("relays", 1);
 
+        #elif defined(SM_PW702U)
+        
+        setSetting("board", 39);
+        setSetting("ledGPIO", 1, 4);
+        setSetting("ledLogic", 1, 0);
+        setSetting("btnGPIO", 1, 13);
+        setSetting("btnRelay", 1, 1);
+        setSetting("relayGPIO", 1, 12);
+        setSetting("relayType", 1, RELAY_TYPE_NORMAL);
+
     #else
 
         #error "UNSUPPORTED HARDWARE!"

code/platformio.ini

@@ -1003,6 +1003,29 @@ upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 
+[env:sm_pw702u]
+platform = espressif8266
+framework = arduino
+board = esp12e
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DSM_PW702U
+monitor_baud = 115200
+
+[env:sm_pw702u-ota]
+platform = espressif8266
+framework = arduino
+board = esp12e
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DSM_PW702U
+upload_speed = 115200
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+monitor_baud = 115200
+
 # ------------------------------------------------------------------------------
 # GENERIC OTA ENVIRONMENTS
 # ------------------------------------------------------------------------------