The format is based on [Keep a Changelog](http://keepachangelog.com/)
The format is based on [Keep a Changelog](http://keepachangelog.com/)
and this project adheres to [Semantic Versioning](http://semver.org/).
and this project adheres to [Semantic Versioning](http://semver.org/).
## [1.9.3] 2017-09-04
### Added
- New "erase.config" option in terminal to delete SDK settings
- Added error code to error message when updating from web UI
- Fixed Web UI to be behind a proxy (http://tinkerman.cat/secure-remote-access-to-your-iot-devices/)
- Support "ON", "OFF" and "TOGGLE" (also lowercase) as payload in relay MQTT, API and WS (http://tinkerman.cat/using-google-assistant-control-your-esp8266-devices/)
### Changed
- Updated fauxmoESP library to 2.2.0
### Fixed
- Fix HLW8012 calibration (#194)
- Fix telnet dropping connection
- Fix WiFiSecureClient connection with PubSubClient (#64)
## [1.9.2] 2017-08-31
## [1.9.2] 2017-08-31
### Added
### Added
- System stability check (turns off everything except WIFI AP, OTA and telnet if there is a boot crash loop) (#196)
- System stability check (turns off everything except WIFI AP, OTA and telnet if there is a boot crash loop) (#196)
@ -17,7 +32,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
### Changed
### Changed
- Updated NoFUSS support
- Updated NoFUSS support
- Web UI documentation changes
- Web UI documentation changes
- Changes in terminal commands
- Changes in terminal commands ("reconnect" is now "reset.wifi", also new commands added)
### Fixed
### Fixed
- Crash in settings saving (#190) and fixed UDP debug conditional build clauses
- Crash in settings saving (#190) and fixed UDP debug conditional build clauses
@ -4,7 +4,7 @@ ESPurna ("spark" in Catalan) is a custom firmware for ESP8266 based smart switch
It was originally developed with the **[IteadStudio Sonoff](https://www.itead.cc/sonoff-wifi-wireless-switch.html)** in mind but now it supports a growing number of ESP8266-based boards.
It was originally developed with the **[IteadStudio Sonoff](https://www.itead.cc/sonoff-wifi-wireless-switch.html)** in mind but now it supports a growing number of ESP8266-based boards.
It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries.
It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries.
**Current Release Version is 1.9.2**, read the [changelog](https://bitbucket.org/xoseperez/espurna/src/master/CHANGELOG.md).
**Current Release Version is 1.9.3**, read the [changelog](https://bitbucket.org/xoseperez/espurna/src/master/CHANGELOG.md).
**NOTE**: since version 1.9.0 the default **MQTT topics for commands have changed**. They all now end with "/set". This means you will have to change your controller software (Node-RED or alike) to send messages to -for instance- "/home/living/light/relay/0/set". The device will publish its state in "/home/living/light/relay/0" like before.
**NOTE**: since version 1.9.0 the default **MQTT topics for commands have changed**. They all now end with "/set". This means you will have to change your controller software (Node-RED or alike) to send messages to -for instance- "/home/living/light/relay/0/set". The device will publish its state in "/home/living/light/relay/0" like before.
@ -23,13 +23,14 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
* Support for **relay synchronization** (all equal, only one ON, one and only on ON)
* Support for **relay synchronization** (all equal, only one ON, one and only on ON)
* Support for **delayed ON/OFF**
* Support for **delayed ON/OFF**
* **MQTT** enabled
* **MQTT** enabled
* **SSL/TLS support** (not on regular builds, requires staging version of Arduino Core for ESP8266)
* **SSL/TLS support** (not on regular builds, see #64)
* Switch on/off and toggle relays
* Switch on/off and toggle relays
* Report button event notifications
* Report button event notifications
* Enable/disable pulse mode
* Enable/disable pulse mode
* Change LED notification mode
* Change LED notification mode
* Remote reset the board
* Remote reset the board
* **Alexa** integration using the [FauxmoESP Library](https://bitbucket.org/xoseperez/fauxmoesp)
* **Alexa** integration using the [FauxmoESP Library](https://bitbucket.org/xoseperez/fauxmoesp)
* [**Google Assistant**](http://tinkerman.cat/using-google-assistant-control-your-esp8266-devices/) integration using IFTTT and Webhooks (Google Home, Allo)
* [**Domoticz**](https://domoticz.com/) integration via MQTT
* [**Domoticz**](https://domoticz.com/) integration via MQTT
* [**Home Assistant**](https://home-assistant.io/) integration via MQTT
* [**Home Assistant**](https://home-assistant.io/) integration via MQTT
* Supports MQTT auto-discover feature
* Supports MQTT auto-discover feature
@ -49,10 +50,12 @@ It uses the Arduino Core for ESP8266 framework and a number of 3rd party librari
* Websockets-based communication between the device and the browser
* Websockets-based communication between the device and the browser
* Backup and restore settings option
* Backup and restore settings option
* Upgrade firmware from the web interface
* Upgrade firmware from the web interface
* Works great behind a [secured reverse proxy](http://tinkerman.cat/secure-remote-access-to-your-iot-devices/)
* **REST API** (enable/disable from web interface)
* **REST API** (enable/disable from web interface)
* GET and PUT relay status
* GET and PUT relay status
* Change light color (for supported hardware)
* Change light color (for supported hardware)
* GET sensor data (power, current, voltage, temperature and humidity) depending on the available hardware
* GET sensor data (power, current, voltage, temperature and humidity) depending on the available hardware
* Works great behind a secured reverse proxy
* **RPC API** (enable/disable from web interface)
* **RPC API** (enable/disable from web interface)
* Remote reset the board
* Remote reset the board
* **Over-The-Air** (OTA) updates even for 1Mb boards
* **Over-The-Air** (OTA) updates even for 1Mb boards
Xose Pérez
7 years ago