mh
/
mhsw-espurna
1
0
Fork 0
Code Releases 0 Activity
Browse Source

isolate PROGMEM 

Isolated dependencies

sensors dependencies

enums, macros and prototypes.

I2C dependencies moved to actual sensor files.

definitelly redefine
rfm69
Lazar Obradovic 6 years ago
parent
0bdd00304f
commit
69cbb056a3
14 changed files with 451 additions and 400 deletions
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +3
    -0
      code/espurna/config/all.h
  2. +0
    -8
      code/espurna/config/defaults.h
  3. +76
    -0
      code/espurna/config/dependencies.h
  4. +4
    -188
      code/espurna/config/general.h
  5. +97
    -0
      code/espurna/config/progmem.h
  6. +17
    -0
      code/espurna/config/prototypes.h
  7. +1
    -204
      code/espurna/config/sensors.h
  8. +231
    -0
      code/espurna/config/types.h
  9. +3
    -0
      code/espurna/sensors/AM2320Sensor.h
  10. +3
    -0
      code/espurna/sensors/BH1750Sensor.h
  11. +3
    -0
      code/espurna/sensors/BMX280Sensor.h
  12. +4
    -0
      code/espurna/sensors/EmonSensor.h
  13. +4
    -0
      code/espurna/sensors/SHT3XI2CSensor.h
  14. +5
    -0
      code/espurna/sensors/SI7021Sensor.h

+ 3
- 0
code/espurna/config/all.h View File

@ -24,12 +24,15 @@
#endif #endif
#include "version.h" #include "version.h"
#include "types.h"
#include "arduino.h" #include "arduino.h"
#include "hardware.h" #include "hardware.h"
#include "defaults.h" #include "defaults.h"
#include "general.h" #include "general.h"
#include "prototypes.h" #include "prototypes.h"
#include "sensors.h" #include "sensors.h"
#include "progmem.h"
#include "dependencies.h"
#ifdef USE_CORE_VERSION_H #ifdef USE_CORE_VERSION_H
#include "core_version.h" #include "core_version.h"


+ 0
- 8
code/espurna/config/defaults.h View File

@ -404,14 +404,6 @@
#define HOSTNAME "" #define HOSTNAME ""
#endif #endif
// Needed for ESP8285 boards under Windows using PlatformIO (?)
#ifndef BUTTON_PUSHBUTTON
#define BUTTON_PUSHBUTTON 0
#define BUTTON_SWITCH 1
#define BUTTON_DEFAULT_HIGH 2
#define BUTTON_SET_PULLUP 4
#endif
// Relay providers // Relay providers
#ifndef RELAY_PROVIDER #ifndef RELAY_PROVIDER
#define RELAY_PROVIDER RELAY_PROVIDER_RELAY #define RELAY_PROVIDER RELAY_PROVIDER_RELAY


+ 76
- 0
code/espurna/config/dependencies.h View File

@ -0,0 +1,76 @@
#ifndef DEPENDENCIES_H
#define DEPENDENCIES_H
//------------------------------------------------------------------------------
// Do not change this file unless you know what you are doing
// Configuration settings are in the settings.h file
//------------------------------------------------------------------------------
#if DEBUG_TELNET_SUPPORT
#undef TELNET_SUPPORT
#define TELNET_SUPPORT 1
#endif
#ifndef DEBUG_WEB_SUPPORT
#define DEBUG_WEB_SUPPORT WEB_SUPPORT // Enable web debug log if web is enabled too
#endif
#if DEBUG_WEB_SUPPORT
#undef WEB_SUPPORT
#define WEB_SUPPORT 1 // Chicken and egg :)
#endif
#if WEB_SUPPORT == 0
#undef SSDP_SUPPORT
#define SSDP_SUPPORT 0 // SSDP support requires web support
#endif
#if UART_MQTT_SUPPORT
#define MQTT_SUPPORT 1
#undef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT 0
#undef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT 0
#endif
#if DOMOTICZ_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Domoticz enabled enable MQTT
#endif
#if HOMEASSISTANT_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Home Assistant enabled enable MQTT
#endif
#ifndef ASYNC_TCP_SSL_ENABLED
#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC
#undef THINGSPEAK_SUPPORT // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED
#endif
#endif
#if SCHEDULER_SUPPORT
#undef NTP_SUPPORT
#define NTP_SUPPORT 1 // Scheduler needs NTP
#endif
//------------------------------------------------------------------------------
// Sensors
//------------------------------------------------------------------------------
#if ANALOG_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
#if EMON_ANALOG_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
// I2C dependencies moved to actual sensor files.
//------------------------------------------------------------------------------
#endif // DEPENDENCIES_H

+ 4
- 188
code/espurna/config/general.h View File

@ -12,9 +12,6 @@
#define USE_PASSWORD 1 // Insecurity caution! Disabling this will disable password querying completely. #define USE_PASSWORD 1 // Insecurity caution! Disabling this will disable password querying completely.
#define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250] #define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250]
#define ARRAYINIT(type, name, ...) \
type name[] = {__VA_ARGS__};
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// TELNET // TELNET
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
@ -75,33 +72,15 @@
// To receive the message son the destination computer use nc: // To receive the message son the destination computer use nc:
// nc -ul 8113 // nc -ul 8113
#ifndef DEBUG_UDP_SUPPORT
#define DEBUG_UDP_SUPPORT 0 // Enable UDP debug log
#endif
#define DEBUG_UDP_IP IPAddress(192, 168, 1, 100)
#define DEBUG_UDP_PORT 8113
//------------------------------------------------------------------------------
#ifndef DEBUG_TELNET_SUPPORT #ifndef DEBUG_TELNET_SUPPORT
#define DEBUG_TELNET_SUPPORT TELNET_SUPPORT // Enable telnet debug log if telnet is enabled too #define DEBUG_TELNET_SUPPORT TELNET_SUPPORT // Enable telnet debug log if telnet is enabled too
#endif #endif
#if DEBUG_TELNET_SUPPORT
#undef TELNET_SUPPORT
#define TELNET_SUPPORT 1
#endif
//------------------------------------------------------------------------------
#ifndef DEBUG_WEB_SUPPORT
#define DEBUG_WEB_SUPPORT WEB_SUPPORT // Enable web debug log if web is enabled too
#endif
#if DEBUG_WEB_SUPPORT
#undef WEB_SUPPORT
#define WEB_SUPPORT 1 // Chicken and egg :)
#ifndef DEBUG_UDP_SUPPORT
#define DEBUG_UDP_SUPPORT 0 // Enable UDP debug log
#endif #endif
#define DEBUG_UDP_IP IPAddress(192, 168, 1, 100)
#define DEBUG_UDP_PORT 8113
#define DEBUG_WEB_ENABLED 1 // Enable debug output by default #define DEBUG_WEB_ENABLED 1 // Enable debug output by default
@ -110,16 +89,6 @@
// General debug options and macros // General debug options and macros
#define DEBUG_SUPPORT DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT #define DEBUG_SUPPORT DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT
#if DEBUG_SUPPORT
#define DEBUG_MSG(...) debugSend(__VA_ARGS__)
#define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)
#endif
#ifndef DEBUG_MSG
#define DEBUG_MSG(...)
#define DEBUG_MSG_P(...)
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// TERMINAL // TERMINAL
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
@ -190,40 +159,6 @@
#define LOADAVG_INTERVAL 30000 // Interval between calculating load average (in ms) #define LOADAVG_INTERVAL 30000 // Interval between calculating load average (in ms)
#define LOADAVG_REPORT 1 // Should we report Load average over MQTT? #define LOADAVG_REPORT 1 // Should we report Load average over MQTT?
//------------------------------------------------------------------------------
// RESET
//------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button
#define CUSTOM_RESET_WEB 2 // Reset from web interface
#define CUSTOM_RESET_TERMINAL 3 // Reset from terminal
#define CUSTOM_RESET_MQTT 4 // Reset via MQTT
#define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA 6 // Reset after successful OTA update
#define CUSTOM_RESET_HTTP 7 // Reset via HTTP GET
#define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface
#define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal
#define CUSTOM_RESET_MAX 10
PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reboot from web interface";
PROGMEM const char custom_reset_terminal[] = "Reboot from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reboot from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reboot from RPC";
PROGMEM const char custom_reset_ota[] = "Reboot after successful OTA update";
PROGMEM const char custom_reset_http[] = "Reboot from HTTP";
PROGMEM const char custom_reset_nofuss[] = "Reboot after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reboot after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
custom_reset_hardware, custom_reset_web, custom_reset_terminal,
custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
custom_reset_http, custom_reset_nofuss, custom_reset_upgrade,
custom_reset_factory
};
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// BUTTON // BUTTON
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
@ -244,52 +179,10 @@ PROGMEM const char* const custom_reset_string[] = {
#define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click #define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click
#endif #endif
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
#define BUTTON_EVENT_RELEASED 2
#define BUTTON_EVENT_CLICK 2
#define BUTTON_EVENT_DBLCLICK 3
#define BUTTON_EVENT_LNGCLICK 4
#define BUTTON_EVENT_LNGLNGCLICK 5
#define BUTTON_MODE_NONE 0
#define BUTTON_MODE_TOGGLE 1
#define BUTTON_MODE_ON 2
#define BUTTON_MODE_OFF 3
#define BUTTON_MODE_AP 4
#define BUTTON_MODE_RESET 5
#define BUTTON_MODE_PULSE 6
#define BUTTON_MODE_FACTORY 7
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// RELAY // RELAY
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
#define RELAY_BOOT_OFF 0
#define RELAY_BOOT_ON 1
#define RELAY_BOOT_SAME 2
#define RELAY_BOOT_TOGGLE 3
#define RELAY_TYPE_NORMAL 0
#define RELAY_TYPE_INVERSE 1
#define RELAY_TYPE_LATCHED 2
#define RELAY_TYPE_LATCHED_INVERSE 3
#define RELAY_SYNC_ANY 0
#define RELAY_SYNC_NONE_OR_ONE 1
#define RELAY_SYNC_ONE 2
#define RELAY_SYNC_SAME 3
#define RELAY_PULSE_NONE 0
#define RELAY_PULSE_OFF 1
#define RELAY_PULSE_ON 2
#define RELAY_PROVIDER_RELAY 0
#define RELAY_PROVIDER_DUAL 1
#define RELAY_PROVIDER_LIGHT 2
#define RELAY_PROVIDER_RFBRIDGE 3
#define RELAY_PROVIDER_STM 4
// Default boot mode: 0 means OFF, 1 ON and 2 whatever was before // Default boot mode: 0 means OFF, 1 ON and 2 whatever was before
#define RELAY_BOOT_MODE RELAY_BOOT_OFF #define RELAY_BOOT_MODE RELAY_BOOT_OFF
@ -314,20 +207,6 @@ PROGMEM const char* const custom_reset_string[] = {
// Do not save relay state after these many milliseconds // Do not save relay state after these many milliseconds
#define RELAY_SAVE_DELAY 1000 #define RELAY_SAVE_DELAY 1000
//------------------------------------------------------------------------------
// LED
//------------------------------------------------------------------------------
#define LED_MODE_MQTT 0 // LED will be managed from MQTT (OFF by default)
#define LED_MODE_WIFI 1 // LED will blink according to the WIFI status
#define LED_MODE_FOLLOW 2 // LED will follow state of linked relay (check RELAY#_LED)
#define LED_MODE_FOLLOW_INVERSE 3 // LED will follow the opposite state of linked relay (check RELAY#_LED)
#define LED_MODE_FINDME 4 // LED will be ON if all relays are OFF
#define LED_MODE_FINDME_WIFI 5 // A mixture between WIFI and FINDME
#define LED_MODE_ON 6 // LED always ON
#define LED_MODE_OFF 7 // LED always OFF
#define LED_MODE_RELAY 8 // If any relay is ON, LED will be ON, otherwise OFF
#define LED_MODE_RELAY_WIFI 9 // A mixture between WIFI and RELAY, the reverse of MIXED
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
// WIFI // WIFI
@ -425,14 +304,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses #define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses
#define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time) #define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time)
// -----------------------------------------------------------------------------
// UI
// -----------------------------------------------------------------------------
#define UI_TAG_INPUT 0
#define UI_TAG_CHECKBOX 1
#define UI_TAG_SELECT 2
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
// MDNS / LLMNR / NETBIOS / SSDP // MDNS / LLMNR / NETBIOS / SSDP
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
@ -463,10 +334,6 @@ PROGMEM const char* const custom_reset_string[] = {
//#define SSDP_DEVICE_TYPE "urn:schemas-upnp-org:device:BinaryLight:1" //#define SSDP_DEVICE_TYPE "urn:schemas-upnp-org:device:BinaryLight:1"
#endif #endif
#if WEB_SUPPORT == 0
#undef SSDP_SUPPORT
#define SSDP_SUPPORT 0 // SSDP support requires web support
#endif
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
// SPIFFS // SPIFFS
@ -510,14 +377,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define UART_MQTT_BAUDRATE 115200 // Serial speed #define UART_MQTT_BAUDRATE 115200 // Serial speed
#define UART_MQTT_BUFFER_SIZE 100 // UART buffer size #define UART_MQTT_BUFFER_SIZE 100 // UART buffer size
#if UART_MQTT_SUPPORT
#define MQTT_SUPPORT 1
#undef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT 0
#undef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT 0
#endif
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
// MQTT // MQTT
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
@ -674,11 +533,6 @@ PROGMEM const char* const custom_reset_string[] = {
// LIGHT // LIGHT
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
// Available light providers (do not change)
#define LIGHT_PROVIDER_NONE 0
#define LIGHT_PROVIDER_MY92XX 1 // works with MY9291 and MY9231
#define LIGHT_PROVIDER_DIMMER 2
// LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels. // LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels.
// They have to be defined for each device in the hardware.h file. // They have to be defined for each device in the hardware.h file.
// If 3 or more channels first 3 will be considered RGB. // If 3 or more channels first 3 will be considered RGB.
@ -738,11 +592,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define DOMOTICZ_SUPPORT MQTT_SUPPORT // Build with domoticz (if MQTT) support (1.72Kb) #define DOMOTICZ_SUPPORT MQTT_SUPPORT // Build with domoticz (if MQTT) support (1.72Kb)
#endif #endif
#if DOMOTICZ_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Domoticz enabled enable MQTT
#endif
#define DOMOTICZ_ENABLED 0 // Disable domoticz by default #define DOMOTICZ_ENABLED 0 // Disable domoticz by default
#define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic #define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic #define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic
@ -755,11 +604,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define HOMEASSISTANT_SUPPORT MQTT_SUPPORT // Build with home assistant support (if MQTT, 1.64Kb) #define HOMEASSISTANT_SUPPORT MQTT_SUPPORT // Build with home assistant support (if MQTT, 1.64Kb)
#endif #endif
#if HOMEASSISTANT_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Home Assistant enabled enable MQTT
#endif
#define HOMEASSISTANT_ENABLED 0 // Integration not enabled by default #define HOMEASSISTANT_ENABLED 0 // Integration not enabled by default
#define HOMEASSISTANT_PREFIX "homeassistant" // Default MQTT prefix #define HOMEASSISTANT_PREFIX "homeassistant" // Default MQTT prefix
@ -807,28 +651,14 @@ PROGMEM const char* const custom_reset_string[] = {
#define THINGSPEAK_URL "/update" #define THINGSPEAK_URL "/update"
#define THINGSPEAK_MIN_INTERVAL 15000 // Minimum interval between POSTs (in millis) #define THINGSPEAK_MIN_INTERVAL 15000 // Minimum interval between POSTs (in millis)
#ifndef ASYNC_TCP_SSL_ENABLED
#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC
#undef THINGSPEAK_SUPPORT // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED
#endif
#endif
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
// SCHEDULER // SCHEDULER
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
#define SCHEDULER_TYPE_SWITCH 1
#define SCHEDULER_TYPE_DIM 2
#ifndef SCHEDULER_SUPPORT #ifndef SCHEDULER_SUPPORT
#define SCHEDULER_SUPPORT 1 // Enable scheduler (1.77Kb) #define SCHEDULER_SUPPORT 1 // Enable scheduler (1.77Kb)
#endif #endif
#if SCHEDULER_SUPPORT
#undef NTP_SUPPORT
#define NTP_SUPPORT 1 // Scheduler needs NTP
#endif
#define SCHEDULER_MAX_SCHEDULES 10 // Max schedules alowed #define SCHEDULER_MAX_SCHEDULES 10 // Max schedules alowed
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
@ -891,20 +721,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define IR_BUTTON_SET 1 // IR button set to use (see below) #define IR_BUTTON_SET 1 // IR button set to use (see below)
#endif #endif
// IR Button modes
#define IR_BUTTON_MODE_NONE 0
#define IR_BUTTON_MODE_RGB 1
#define IR_BUTTON_MODE_HSV 2
#define IR_BUTTON_MODE_BRIGHTER 3
#define IR_BUTTON_MODE_STATE 4
#define IR_BUTTON_MODE_EFFECT 5
#define LIGHT_EFFECT_SOLID 0
#define LIGHT_EFFECT_FLASH 1
#define LIGHT_EFFECT_STROBE 2
#define LIGHT_EFFECT_FADE 3
#define LIGHT_EFFECT_SMOOTH 4
//Remote Buttons SET 1 (for the original Remote shipped with the controller) //Remote Buttons SET 1 (for the original Remote shipped with the controller)
#if IR_SUPPORT #if IR_SUPPORT
#if IR_BUTTON_SET == 1 #if IR_BUTTON_SET == 1


+ 97
- 0
code/espurna/config/progmem.h View File

@ -0,0 +1,97 @@
//--------------------------------------------------------------------------------
// General PROGMEM definitions
//--------------------------------------------------------------------------------
PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reboot from web interface";
PROGMEM const char custom_reset_terminal[] = "Reboot from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reboot from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reboot from RPC";
PROGMEM const char custom_reset_ota[] = "Reboot after successful OTA update";
PROGMEM const char custom_reset_http[] = "Reboot from HTTP";
PROGMEM const char custom_reset_nofuss[] = "Reboot after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reboot after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
custom_reset_hardware, custom_reset_web, custom_reset_terminal,
custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
custom_reset_http, custom_reset_nofuss, custom_reset_upgrade,
custom_reset_factory
};
#if SENSOR_SUPPORT
PROGMEM const unsigned char magnitude_decimals[] = {
0,
1, 0, 2,
3, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0,
0, 0, 0,
0, 0
};
PROGMEM const char magnitude_unknown_topic[] = "unknown";
PROGMEM const char magnitude_temperature_topic[] = "temperature";
PROGMEM const char magnitude_humidity_topic[] = "humidity";
PROGMEM const char magnitude_pressure_topic[] = "pressure";
PROGMEM const char magnitude_current_topic[] = "current";
PROGMEM const char magnitude_voltage_topic[] = "voltage";
PROGMEM const char magnitude_active_power_topic[] = "power";
PROGMEM const char magnitude_apparent_power_topic[] = "apparent";
PROGMEM const char magnitude_reactive_power_topic[] = "reactive";
PROGMEM const char magnitude_power_factor_topic[] = "factor";
PROGMEM const char magnitude_energy_topic[] = "energy";
PROGMEM const char magnitude_energy_delta_topic[] = "energy_delta";
PROGMEM const char magnitude_analog_topic[] = "analog";
PROGMEM const char magnitude_digital_topic[] = "digital";
PROGMEM const char magnitude_events_topic[] = "events";
PROGMEM const char magnitude_pm1dot0_topic[] = "pm1dot0";
PROGMEM const char magnitude_pm2dot5_topic[] = "pm2dot5";
PROGMEM const char magnitude_pm10_topic[] = "pm10";
PROGMEM const char magnitude_co2_topic[] = "co2";
PROGMEM const char magnitude_lux_topic[] = "lux";
PROGMEM const char magnitude_uv_topic[] = "uv";
PROGMEM const char magnitude_distance_topic[] = "distance";
PROGMEM const char* const magnitude_topics[] = {
magnitude_unknown_topic, magnitude_temperature_topic, magnitude_humidity_topic,
magnitude_pressure_topic, magnitude_current_topic, magnitude_voltage_topic,
magnitude_active_power_topic, magnitude_apparent_power_topic, magnitude_reactive_power_topic,
magnitude_power_factor_topic, magnitude_energy_topic, magnitude_energy_delta_topic,
magnitude_analog_topic, magnitude_digital_topic, magnitude_events_topic,
magnitude_pm1dot0_topic, magnitude_pm2dot5_topic, magnitude_pm10_topic,
magnitude_co2_topic, magnitude_lux_topic, magnitude_uv_topic,
magnitude_distance_topic
};
PROGMEM const char magnitude_empty[] = "";
PROGMEM const char magnitude_celsius[] = "C";
PROGMEM const char magnitude_fahrenheit[] = "F";
PROGMEM const char magnitude_percentage[] = "%";
PROGMEM const char magnitude_hectopascals[] = "hPa";
PROGMEM const char magnitude_amperes[] = "A";
PROGMEM const char magnitude_volts[] = "V";
PROGMEM const char magnitude_watts[] = "W";
PROGMEM const char magnitude_kw[] = "kW";
PROGMEM const char magnitude_joules[] = "J";
PROGMEM const char magnitude_kwh[] = "kWh";
PROGMEM const char magnitude_ugm3[] = "µg/m3";
PROGMEM const char magnitude_ppm[] = "ppm";
PROGMEM const char magnitude_lux[] = "lux";
PROGMEM const char magnitude_uv[] = "uv";
PROGMEM const char magnitude_distance[] = "m";
PROGMEM const char* const magnitude_units[] = {
magnitude_empty, magnitude_celsius, magnitude_percentage,
magnitude_hectopascals, magnitude_amperes, magnitude_volts,
magnitude_watts, magnitude_watts, magnitude_watts,
magnitude_percentage, magnitude_joules, magnitude_joules,
magnitude_empty, magnitude_empty, magnitude_empty,
magnitude_ugm3, magnitude_ugm3, magnitude_ugm3,
magnitude_ppm, magnitude_lux, magnitude_uv,
magnitude_distance
};
#endif

+ 17
- 0
code/espurna/config/prototypes.h View File

@ -116,3 +116,20 @@ template<typename T> void domoticzSend(const char * key, T nvalue, const char *
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
char * ltrim(char * s); char * ltrim(char * s);
void nice_delay(unsigned long ms); void nice_delay(unsigned long ms);
// -----------------------------------------------------------------------------
// Macros
// -----------------------------------------------------------------------------
#define ARRAYINIT(type, name, ...) \
type name[] = {__VA_ARGS__};
#if DEBUG_SUPPORT
#define DEBUG_MSG(...) debugSend(__VA_ARGS__)
#define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)
#endif
#ifndef DEBUG_MSG
#define DEBUG_MSG(...)
#define DEBUG_MSG_P(...)
#endif

+ 1
- 204
code/espurna/config/sensors.h View File

@ -36,40 +36,9 @@
#define HUMIDITY_MIN_CHANGE 0 // Minimum humidity change to report #define HUMIDITY_MIN_CHANGE 0 // Minimum humidity change to report
#endif #endif
// American Society of Heating, Refrigerating and Air-Conditioning Engineers suggests a range of 45% - 55% humidity to manage health effects and illnesses.
// Comfortable: 30% - 60%
// Recommended: 45% - 55%
// High : 55% - 80%
#define HUMIDITY_NORMAL 0 // > %30
#define HUMIDITY_COMFORTABLE 1 // > %45
#define HUMIDITY_DRY 2 // < %30
#define HUMIDITY_WET 3 // > %70
// United States Environmental Protection Agency - UV Index Scale
// One UV Index unit is equivalent to 25 milliWatts per square meter.
#define UV_INDEX_LOW 0 // 0 to 2 means low danger from the sun's UV rays for the average person.
#define UV_INDEX_MODERATE 1 // 3 to 5 means moderate risk of harm from unprotected sun exposure.
#define UV_INDEX_HIGH 2 // 6 to 7 means high risk of harm from unprotected sun exposure. Protection against skin and eye damage is needed.
#define UV_INDEX_VERY_HIGH 3 // 8 to 10 means very high risk of harm from unprotected sun exposure.
// Take extra precautions because unprotected skin and eyes will be damaged and can burn quickly.
#define UV_INDEX_EXTREME 4 // 11 or more means extreme risk of harm from unprotected sun exposure.
// Take all precautions because unprotected skin and eyes can burn in minutes.
#define SENSOR_PUBLISH_ADDRESSES 0 // Publish sensor addresses #define SENSOR_PUBLISH_ADDRESSES 0 // Publish sensor addresses
#define SENSOR_ADDRESS_TOPIC "address" // Topic to publish sensor addresses #define SENSOR_ADDRESS_TOPIC "address" // Topic to publish sensor addresses
//------------------------------------------------------------------------------
// UNITS
//------------------------------------------------------------------------------
#define POWER_WATTS 0
#define POWER_KILOWATTS 1
#define ENERGY_JOULES 0
#define ENERGY_KWH 1
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
#ifndef SENSOR_TEMPERATURE_UNITS #ifndef SENSOR_TEMPERATURE_UNITS
#define SENSOR_TEMPERATURE_UNITS TMP_CELSIUS // Temperature units (TMP_CELSIUS | TMP_FAHRENHEIT) #define SENSOR_TEMPERATURE_UNITS TMP_CELSIUS // Temperature units (TMP_CELSIUS | TMP_FAHRENHEIT)
@ -83,63 +52,6 @@
#define SENSOR_POWER_UNITS POWER_WATTS // Power units (POWER_WATTS | POWER_KILOWATTS) #define SENSOR_POWER_UNITS POWER_WATTS // Power units (POWER_WATTS | POWER_KILOWATTS)
#endif #endif
//--------------------------------------------------------------------------------
// Sensor ID
// These should remain over time, do not modify them, only add new ones at the end
//--------------------------------------------------------------------------------
#define SENSOR_DHTXX_ID 0x01
#define SENSOR_DALLAS_ID 0x02
#define SENSOR_EMON_ANALOG_ID 0x03
#define SENSOR_EMON_ADC121_ID 0x04
#define SENSOR_EMON_ADS1X15_ID 0x05
#define SENSOR_HLW8012_ID 0x06
#define SENSOR_V9261F_ID 0x07
#define SENSOR_ECH1560_ID 0x08
#define SENSOR_ANALOG_ID 0x09
#define SENSOR_DIGITAL_ID 0x10
#define SENSOR_EVENTS_ID 0x11
#define SENSOR_PMSX003_ID 0x12
#define SENSOR_BMX280_ID 0x13
#define SENSOR_MHZ19_ID 0x14
#define SENSOR_SI7021_ID 0x15
#define SENSOR_SHT3X_I2C_ID 0x16
#define SENSOR_BH1750_ID 0x17
#define SENSOR_PZEM004T_ID 0x18
#define SENSOR_AM2320_ID 0x19
#define SENSOR_GUVAS12SD_ID 0x20
#define SENSOR_CSE7766_ID 0x21
#define SENSOR_TMP3X_ID 0x22
#define SENSOR_HCSR04_ID 0x23
//--------------------------------------------------------------------------------
// Magnitudes
//--------------------------------------------------------------------------------
#define MAGNITUDE_NONE 0
#define MAGNITUDE_TEMPERATURE 1
#define MAGNITUDE_HUMIDITY 2
#define MAGNITUDE_PRESSURE 3
#define MAGNITUDE_CURRENT 4
#define MAGNITUDE_VOLTAGE 5
#define MAGNITUDE_POWER_ACTIVE 6
#define MAGNITUDE_POWER_APPARENT 7
#define MAGNITUDE_POWER_REACTIVE 8
#define MAGNITUDE_POWER_FACTOR 9
#define MAGNITUDE_ENERGY 10
#define MAGNITUDE_ENERGY_DELTA 11
#define MAGNITUDE_ANALOG 12
#define MAGNITUDE_DIGITAL 13
#define MAGNITUDE_EVENTS 14
#define MAGNITUDE_PM1dot0 15
#define MAGNITUDE_PM2dot5 16
#define MAGNITUDE_PM10 17
#define MAGNITUDE_CO2 18
#define MAGNITUDE_LUX 19
#define MAGNITUDE_UV 20
#define MAGNITUDE_DISTANCE 21
#define MAGNITUDE_MAX 22
// ============================================================================= // =============================================================================
// Specific data for each sensor // Specific data for each sensor
@ -154,10 +66,6 @@
#define ANALOG_SUPPORT 0 #define ANALOG_SUPPORT 0
#endif #endif
#if ANALOG_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// BH1750 // BH1750
@ -175,10 +83,6 @@
#define BH1750_MODE BH1750_CONTINUOUS_HIGH_RES_MODE #define BH1750_MODE BH1750_CONTINUOUS_HIGH_RES_MODE
#if BH1750_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// BME280/BMP280 // BME280/BMP280
@ -202,11 +106,6 @@
#define BMX280_HUMIDITY 1 // Oversampling for humidity (set to 0 to disable magnitude, only for BME280) #define BMX280_HUMIDITY 1 // Oversampling for humidity (set to 0 to disable magnitude, only for BME280)
#define BMX280_PRESSURE 1 // Oversampling for pressure (set to 0 to disable magnitude) #define BMX280_PRESSURE 1 // Oversampling for pressure (set to 0 to disable magnitude)
#if BMX280_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// Dallas OneWire temperature sensors // Dallas OneWire temperature sensors
// Enable support by passing DALLAS_SUPPORT=1 build flag // Enable support by passing DALLAS_SUPPORT=1 build flag
@ -331,11 +230,6 @@
#define EMON_ADC121_I2C_ADDRESS 0x00 // 0x00 means auto #define EMON_ADC121_I2C_ADDRESS 0x00 // 0x00 means auto
#if EMON_ADC121_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// Energy Monitor based on ADS1X15 // Energy Monitor based on ADS1X15
// Enable support by passing EMON_ADS1X15_SUPPORT=1 build flag // Enable support by passing EMON_ADS1X15_SUPPORT=1 build flag
@ -350,11 +244,6 @@
#define EMON_ADS1X15_GAIN ADS1X15_REG_CONFIG_PGA_4_096V #define EMON_ADS1X15_GAIN ADS1X15_REG_CONFIG_PGA_4_096V
#define EMON_ADS1X15_MASK 0x0F // A0=1 A1=2 A2=4 A3=8 #define EMON_ADS1X15_MASK 0x0F // A0=1 A1=2 A2=4 A3=8
#if EMON_ADS1X15_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// Energy Monitor based on interval analog GPIO // Energy Monitor based on interval analog GPIO
// Enable support by passing EMON_ANALOG_SUPPORT=1 build flag // Enable support by passing EMON_ANALOG_SUPPORT=1 build flag
@ -364,11 +253,6 @@
#define EMON_ANALOG_SUPPORT 0 // Do not build support by default #define EMON_ANALOG_SUPPORT 0 // Do not build support by default
#endif #endif
#if EMON_ANALOG_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// Counter sensor // Counter sensor
// Enable support by passing EVENTS_SUPPORT=1 build flag // Enable support by passing EVENTS_SUPPORT=1 build flag
@ -511,11 +395,6 @@
#define SHT3X_I2C_ADDRESS 0x00 // 0x00 means auto #define SHT3X_I2C_ADDRESS 0x00 // 0x00 means auto
#endif #endif
#if SHT3X_I2C_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// SI7021 temperature & humidity sensor // SI7021 temperature & humidity sensor
// Enable support by passing SI7021_SUPPORT=1 build flag // Enable support by passing SI7021_SUPPORT=1 build flag
@ -529,11 +408,6 @@
#define SI7021_ADDRESS 0x00 // 0x00 means auto #define SI7021_ADDRESS 0x00 // 0x00 means auto
#endif #endif
#if SI7021_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// TMP3X analog temperature sensor // TMP3X analog temperature sensor
// Enable support by passing TMP3X_SUPPORT=1 build flag // Enable support by passing TMP3X_SUPPORT=1 build flag
@ -591,11 +465,6 @@
#define AM2320_ADDRESS 0x00 // 0x00 means auto #define AM2320_ADDRESS 0x00 // 0x00 means auto
#endif #endif
#if AM2320_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------ //------------------------------------------------------------------------------
// GUVAS12SD UV Sensor (analog) // GUVAS12SD UV Sensor (analog)
// Enable support by passing GUVAS12SD_SUPPORT=1 build flag // Enable support by passing GUVAS12SD_SUPPORT=1 build flag
@ -610,7 +479,7 @@
#endif #endif
// ============================================================================= // =============================================================================
// Sensor helpers configuration
// Sensor helpers configuration - can't move to dependencies.h
// ============================================================================= // =============================================================================
#ifndef SENSOR_SUPPORT #ifndef SENSOR_SUPPORT
@ -671,78 +540,6 @@
#if SENSOR_SUPPORT #if SENSOR_SUPPORT
PROGMEM const unsigned char magnitude_decimals[] = {
0,
1, 0, 2,
3, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0,
0, 0, 0,
0, 0,
2, 3
};
PROGMEM const char magnitude_unknown_topic[] = "unknown";
PROGMEM const char magnitude_temperature_topic[] = "temperature";
PROGMEM const char magnitude_humidity_topic[] = "humidity";
PROGMEM const char magnitude_pressure_topic[] = "pressure";
PROGMEM const char magnitude_current_topic[] = "current";
PROGMEM const char magnitude_voltage_topic[] = "voltage";
PROGMEM const char magnitude_active_power_topic[] = "power";
PROGMEM const char magnitude_apparent_power_topic[] = "apparent";
PROGMEM const char magnitude_reactive_power_topic[] = "reactive";
PROGMEM const char magnitude_power_factor_topic[] = "factor";
PROGMEM const char magnitude_energy_topic[] = "energy";
PROGMEM const char magnitude_energy_delta_topic[] = "energy_delta";
PROGMEM const char magnitude_analog_topic[] = "analog";
PROGMEM const char magnitude_digital_topic[] = "digital";
PROGMEM const char magnitude_events_topic[] = "events";
PROGMEM const char magnitude_pm1dot0_topic[] = "pm1dot0";
PROGMEM const char magnitude_pm2dot5_topic[] = "pm2dot5";
PROGMEM const char magnitude_pm10_topic[] = "pm10";
PROGMEM const char magnitude_co2_topic[] = "co2";
PROGMEM const char magnitude_lux_topic[] = "lux";
PROGMEM const char magnitude_uv_topic[] = "uv";
PROGMEM const char magnitude_distance_topic[] = "distance";
PROGMEM const char* const magnitude_topics[] = {
magnitude_unknown_topic, magnitude_temperature_topic, magnitude_humidity_topic,
magnitude_pressure_topic, magnitude_current_topic, magnitude_voltage_topic,
magnitude_active_power_topic, magnitude_apparent_power_topic, magnitude_reactive_power_topic,
magnitude_power_factor_topic, magnitude_energy_topic, magnitude_energy_delta_topic,
magnitude_analog_topic, magnitude_digital_topic, magnitude_events_topic,
magnitude_pm1dot0_topic, magnitude_pm2dot5_topic, magnitude_pm10_topic,
magnitude_co2_topic, magnitude_lux_topic, magnitude_uv_topic,
magnitude_distance_topic
};
PROGMEM const char magnitude_empty[] = "";
PROGMEM const char magnitude_celsius[] = "C";
PROGMEM const char magnitude_fahrenheit[] = "F";
PROGMEM const char magnitude_percentage[] = "%";
PROGMEM const char magnitude_hectopascals[] = "hPa";
PROGMEM const char magnitude_amperes[] = "A";
PROGMEM const char magnitude_volts[] = "V";
PROGMEM const char magnitude_watts[] = "W";
PROGMEM const char magnitude_kw[] = "kW";
PROGMEM const char magnitude_joules[] = "J";
PROGMEM const char magnitude_kwh[] = "kWh";
PROGMEM const char magnitude_ugm3[] = "µg/m3";
PROGMEM const char magnitude_ppm[] = "ppm";
PROGMEM const char magnitude_lux[] = "lux";
PROGMEM const char magnitude_uv[] = "uv";
PROGMEM const char magnitude_distance[] = "m";
PROGMEM const char* const magnitude_units[] = {
magnitude_empty, magnitude_celsius, magnitude_percentage,
magnitude_hectopascals, magnitude_amperes, magnitude_volts,
magnitude_watts, magnitude_watts, magnitude_watts,
magnitude_percentage, magnitude_joules, magnitude_joules,
magnitude_empty, magnitude_empty, magnitude_empty,
magnitude_ugm3, magnitude_ugm3, magnitude_ugm3,
magnitude_ppm, magnitude_lux, magnitude_uv,
magnitude_distance
};
#include "../sensors/BaseSensor.h" #include "../sensors/BaseSensor.h"
#if AM2320_SUPPORT #if AM2320_SUPPORT


+ 231
- 0
code/espurna/config/types.h View File

@ -0,0 +1,231 @@
//------------------------------------------------------------------------------
// Type definitions
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
// BUTTONS
//------------------------------------------------------------------------------
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
#define BUTTON_EVENT_RELEASED 2
#define BUTTON_EVENT_CLICK 2
#define BUTTON_EVENT_DBLCLICK 3
#define BUTTON_EVENT_LNGCLICK 4
#define BUTTON_EVENT_LNGLNGCLICK 5
#define BUTTON_MODE_NONE 0
#define BUTTON_MODE_TOGGLE 1
#define BUTTON_MODE_ON 2
#define BUTTON_MODE_OFF 3
#define BUTTON_MODE_AP 4
#define BUTTON_MODE_RESET 5
#define BUTTON_MODE_PULSE 6
#define BUTTON_MODE_FACTORY 7
// Needed for ESP8285 boards under Windows using PlatformIO (?)
#ifndef BUTTON_PUSHBUTTON
#define BUTTON_PUSHBUTTON 0
#define BUTTON_SWITCH 1
#define BUTTON_DEFAULT_HIGH 2
#define BUTTON_SET_PULLUP 4
#endif
//------------------------------------------------------------------------------
// RELAY
//------------------------------------------------------------------------------
#define RELAY_BOOT_OFF 0
#define RELAY_BOOT_ON 1
#define RELAY_BOOT_SAME 2
#define RELAY_BOOT_TOGGLE 3
#define RELAY_TYPE_NORMAL 0
#define RELAY_TYPE_INVERSE 1
#define RELAY_TYPE_LATCHED 2
#define RELAY_TYPE_LATCHED_INVERSE 3
#define RELAY_SYNC_ANY 0
#define RELAY_SYNC_NONE_OR_ONE 1
#define RELAY_SYNC_ONE 2
#define RELAY_SYNC_SAME 3
#define RELAY_PULSE_NONE 0
#define RELAY_PULSE_OFF 1
#define RELAY_PULSE_ON 2
#define RELAY_PROVIDER_RELAY 0
#define RELAY_PROVIDER_DUAL 1
#define RELAY_PROVIDER_LIGHT 2
#define RELAY_PROVIDER_RFBRIDGE 3
#define RELAY_PROVIDER_STM 4
//------------------------------------------------------------------------------
// LED
//------------------------------------------------------------------------------
#define LED_MODE_MQTT 0 // LED will be managed from MQTT (OFF by default)
#define LED_MODE_WIFI 1 // LED will blink according to the WIFI status
#define LED_MODE_FOLLOW 2 // LED will follow state of linked relay (check RELAY#_LED)
#define LED_MODE_FOLLOW_INVERSE 3 // LED will follow the opposite state of linked relay (check RELAY#_LED)
#define LED_MODE_FINDME 4 // LED will be ON if all relays are OFF
#define LED_MODE_FINDME_WIFI 5 // A mixture between WIFI and FINDME
#define LED_MODE_ON 6 // LED always ON
#define LED_MODE_OFF 7 // LED always OFF
#define LED_MODE_RELAY 8 // If any relay is ON, LED will be ON, otherwise OFF
#define LED_MODE_RELAY_WIFI 9 // A mixture between WIFI and RELAY, the reverse of MIXED
// -----------------------------------------------------------------------------
// UI
// -----------------------------------------------------------------------------
#define UI_TAG_INPUT 0
#define UI_TAG_CHECKBOX 1
#define UI_TAG_SELECT 2
// -----------------------------------------------------------------------------
// LIGHT
// -----------------------------------------------------------------------------
// Available light providers (do not change)
#define LIGHT_PROVIDER_NONE 0
#define LIGHT_PROVIDER_MY92XX 1 // works with MY9291 and MY9231
#define LIGHT_PROVIDER_DIMMER 2
// -----------------------------------------------------------------------------
// SCHEDULER
// -----------------------------------------------------------------------------
#define SCHEDULER_TYPE_SWITCH 1
#define SCHEDULER_TYPE_DIM 2
// -----------------------------------------------------------------------------
// IR
// -----------------------------------------------------------------------------
// IR Button modes
#define IR_BUTTON_MODE_NONE 0
#define IR_BUTTON_MODE_RGB 1
#define IR_BUTTON_MODE_HSV 2
#define IR_BUTTON_MODE_BRIGHTER 3
#define IR_BUTTON_MODE_STATE 4
#define IR_BUTTON_MODE_EFFECT 5
#define LIGHT_EFFECT_SOLID 0
#define LIGHT_EFFECT_FLASH 1
#define LIGHT_EFFECT_STROBE 2
#define LIGHT_EFFECT_FADE 3
#define LIGHT_EFFECT_SMOOTH 4
//------------------------------------------------------------------------------
// RESET
//------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button
#define CUSTOM_RESET_WEB 2 // Reset from web interface
#define CUSTOM_RESET_TERMINAL 3 // Reset from terminal
#define CUSTOM_RESET_MQTT 4 // Reset via MQTT
#define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA 6 // Reset after successful OTA update
#define CUSTOM_RESET_HTTP 7 // Reset via HTTP GET
#define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface
#define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal
#define CUSTOM_RESET_MAX 10
//------------------------------------------------------------------------------
// ENVIRONMENTAL
//------------------------------------------------------------------------------
// American Society of Heating, Refrigerating and Air-Conditioning Engineers suggests a range of 45% - 55% humidity to manage health effects and illnesses.
// Comfortable: 30% - 60%
// Recommended: 45% - 55%
// High : 55% - 80%
#define HUMIDITY_NORMAL 0 // > %30
#define HUMIDITY_COMFORTABLE 1 // > %45
#define HUMIDITY_DRY 2 // < %30
#define HUMIDITY_WET 3 // > %70
// United States Environmental Protection Agency - UV Index Scale
// One UV Index unit is equivalent to 25 milliWatts per square meter.
#define UV_INDEX_LOW 0 // 0 to 2 means low danger from the sun's UV rays for the average person.
#define UV_INDEX_MODERATE 1 // 3 to 5 means moderate risk of harm from unprotected sun exposure.
#define UV_INDEX_HIGH 2 // 6 to 7 means high risk of harm from unprotected sun exposure. Protection against skin and eye damage is needed.
#define UV_INDEX_VERY_HIGH 3 // 8 to 10 means very high risk of harm from unprotected sun exposure.
// Take extra precautions because unprotected skin and eyes will be damaged and can burn quickly.
#define UV_INDEX_EXTREME 4 // 11 or more means extreme risk of harm from unprotected sun exposure.
// Take all precautions because unprotected skin and eyes can burn in minutes.
//------------------------------------------------------------------------------
// UNITS
//------------------------------------------------------------------------------
#define POWER_WATTS 0
#define POWER_KILOWATTS 1
#define ENERGY_JOULES 0
#define ENERGY_KWH 1
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
//--------------------------------------------------------------------------------
// Sensor ID
// These should remain over time, do not modify them, only add new ones at the end
//--------------------------------------------------------------------------------
#define SENSOR_DHTXX_ID 0x01
#define SENSOR_DALLAS_ID 0x02
#define SENSOR_EMON_ANALOG_ID 0x03
#define SENSOR_EMON_ADC121_ID 0x04
#define SENSOR_EMON_ADS1X15_ID 0x05
#define SENSOR_HLW8012_ID 0x06
#define SENSOR_V9261F_ID 0x07
#define SENSOR_ECH1560_ID 0x08
#define SENSOR_ANALOG_ID 0x09
#define SENSOR_DIGITAL_ID 0x10
#define SENSOR_EVENTS_ID 0x11
#define SENSOR_PMSX003_ID 0x12
#define SENSOR_BMX280_ID 0x13
#define SENSOR_MHZ19_ID 0x14
#define SENSOR_SI7021_ID 0x15
#define SENSOR_SHT3X_I2C_ID 0x16
#define SENSOR_BH1750_ID 0x17
#define SENSOR_PZEM004T_ID 0x18
#define SENSOR_AM2320_ID 0x19
#define SENSOR_GUVAS12SD_ID 0x20
#define SENSOR_CSE7766_ID 0x21
#define SENSOR_TMP3X_ID 0x22
#define SENSOR_HCSR04_ID 0x23
//--------------------------------------------------------------------------------
// Magnitudes
//--------------------------------------------------------------------------------
#define MAGNITUDE_NONE 0
#define MAGNITUDE_TEMPERATURE 1
#define MAGNITUDE_HUMIDITY 2
#define MAGNITUDE_PRESSURE 3
#define MAGNITUDE_CURRENT 4
#define MAGNITUDE_VOLTAGE 5
#define MAGNITUDE_POWER_ACTIVE 6
#define MAGNITUDE_POWER_APPARENT 7
#define MAGNITUDE_POWER_REACTIVE 8
#define MAGNITUDE_POWER_FACTOR 9
#define MAGNITUDE_ENERGY 10
#define MAGNITUDE_ENERGY_DELTA 11
#define MAGNITUDE_ANALOG 12
#define MAGNITUDE_DIGITAL 13
#define MAGNITUDE_EVENTS 14
#define MAGNITUDE_PM1dot0 15
#define MAGNITUDE_PM2dot5 16
#define MAGNITUDE_PM10 17
#define MAGNITUDE_CO2 18
#define MAGNITUDE_LUX 19
#define MAGNITUDE_UV 20
#define MAGNITUDE_DISTANCE 21
#define MAGNITUDE_MAX 22

+ 3
- 0
code/espurna/sensors/AM2320Sensor.h View File

@ -7,6 +7,9 @@
#pragma once #pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h" #include "Arduino.h"
#include "I2CSensor.h" #include "I2CSensor.h"


+ 3
- 0
code/espurna/sensors/BH1750Sensor.h View File

@ -7,6 +7,9 @@
#pragma once #pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h" #include "Arduino.h"
#include "I2CSensor.h" #include "I2CSensor.h"


+ 3
- 0
code/espurna/sensors/BMX280Sensor.h View File

@ -7,6 +7,9 @@
#pragma once #pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h" #include "Arduino.h"
#include "I2CSensor.h" #include "I2CSensor.h"


+ 4
- 0
code/espurna/sensors/EmonSensor.h View File

@ -7,6 +7,10 @@
#pragma once #pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h" #include "Arduino.h"
#include "I2CSensor.h" #include "I2CSensor.h"


+ 4
- 0
code/espurna/sensors/SHT3XI2CSensor.h View File

@ -7,6 +7,10 @@
#pragma once #pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h" #include "Arduino.h"
#include "I2CSensor.h" #include "I2CSensor.h"


+ 5
- 0
code/espurna/sensors/SI7021Sensor.h View File

@ -7,6 +7,11 @@
#pragma once #pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h" #include "Arduino.h"
#include "I2CSensor.h" #include "I2CSensor.h"


Write Preview
Loading…
Cancel
Save