Support for Bruno Horta's OnOfre board

README.md

@@ -241,8 +241,8 @@ Here is the list of supported hardware. For more information please refer to the
 |**IKE ESPike**|**STM_RELAY**|**Arniex Swifitch**|
 |![Heltec Touch Relay](images/devices/heltec-touch-relay.jpg)|![Generic Relay v4.0](images/devices/generic-relay-40.jpg)|![Generic RGBLed v1.0](images/devices/generic-rgbled-10.jpg)|
 |**Heltec Touch Relay**|**Generic Relay v4.0**|**Generic RGBLed v1.0**|
-|![Generic DHT11 v1.0](images/devices/generic-dht11-10.jpg)|![Generic DS18B20 v1.0](images/devices/generic-ds18b20-10.jpg)||
-|**Generic DHT11 v1.0**|**Generic DS18B20 v1.0**||
+|![Generic DHT11 v1.0](images/devices/generic-dht11-10.jpg)|![Generic DS18B20 v1.0](images/devices/generic-ds18b20-10.jpg)|![Bruno Horta's OnOfre](images/devices/bh-onofre.jpg)|
+|**Generic DHT11 v1.0**|**Generic DS18B20 v1.0**|**Bruno Horta's OnOfre**|
 |![Tonbux Mosquito Killer](images/devices/tonbux-mosquito-killer.jpg)|||
 |**Tonbux Mosquito Killer**|||
 

code/espurna/config/arduino.h

@@ -85,6 +85,7 @@
 //#define NEO_COOLCAM_POWER_PLUG_WIFI
 //#define ESTINK_WIFI_POWER_STRIP
 //#define PILOTAK_ESP_DIN_V1
+//#define BH_ONOFRE
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -2240,6 +2240,33 @@
     #define LED3_RELAY          3
     #define LED4_RELAY          4
 
+
+// -----------------------------------------------------------------------------
+// Bruno Horta's OnOfre
+// https://www.bhonofre.pt/
+// https://github.com/brunohorta82/BH_OnOfre/
+// -----------------------------------------------------------------------------
+
+#elif defined(BH_ONOFRE)
+
+    // Info
+    #define MANUFACTURER        "BH"
+    #define DEVICE              "ONOFRE"
+
+    // Buttons
+    #define BUTTON1_PIN         12
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP
+    #define BUTTON1_RELAY       1
+    #define BUTTON2_PIN         13
+    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP
+    #define BUTTON2_RELAY       2
+
+    // Relays
+    #define RELAY1_PIN          4
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+    #define RELAY2_PIN          5
+    #define RELAY2_TYPE         RELAY_TYPE_NORMAL
+
 // -----------------------------------------------------------------------------
 // TEST boards (do not use!!)
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -1004,6 +1004,18 @@ void migrate() {
             setSetting("relayType", 2, RELAY_TYPE_NORMAL);
             setSetting("relayType", 3, RELAY_TYPE_NORMAL);
 
+        #elif defined(BH_ONOFRE)
+
+            setSetting("board", 77);
+            setSetting("btnGPIO", 0, 12);
+            setSetting("btnGPIO", 0, 13);
+            setSetting("btnRelay", 0, 0);
+            setSetting("btnRelay", 0, 1);
+            setSetting("relayGPIO", 0, 4);
+            setSetting("relayGPIO", 1, 5);
+            setSetting("relayType", 0, RELAY_TYPE_NORMAL);
+            setSetting("relayType", 1, RELAY_TYPE_NORMAL);
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -2425,3 +2425,29 @@ upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 extra_scripts = ${common.extra_scripts}
 modules = ${common.modules} sensor
+
+[env:bh-onofre]
+platform = ${common.platform}
+framework = arduino
+board = esp12e
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DBH_ONOFRE
+upload_speed = 460800
+monitor_speed = 115200
+extra_scripts = ${common.extra_scripts}
+modules = ${common.modules}
+
+[env:bh-onofre-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp12e
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DBH_ONOFRE
+upload_speed = 460800
+monitor_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
+modules = ${common.modules}