diff --git a/code/espurna/config/arduino.h b/code/espurna/config/arduino.h
index ea6e9c83..29f61478 100644
--- a/code/espurna/config/arduino.h
+++ b/code/espurna/config/arduino.h
@@ -78,6 +78,7 @@
 //#define GENERIC_ESP01S_DS18B20_V10
 //#define HELTEC_TOUCHRELAY
 //#define ZHILDE_EU44_W
+//#define ALLNET_ESP8266_UP
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)
diff --git a/code/espurna/config/hardware.h b/code/espurna/config/hardware.h
index 37f2c596..70b7df33 100644
--- a/code/espurna/config/hardware.h
+++ b/code/espurna/config/hardware.h
@@ -1971,6 +1971,39 @@
     #define LED1_PIN                1
     #define LED1_PIN_INVERSE        1
 
+    // -----------------------------------------------------------------------------
+    // Allnet 4duino ESP8266-UP-Relais
+    // http://www.allnet.de/de/allnet-brand/produkte/neuheiten/p/allnet-4duino-iot-wlan-relais-unterputz-esp8266-up-relais/
+    // -----------------------------------------------------------------------------
+
+#elif defined(ALLNET_ESP8266_UP)
+
+    // Info
+    #define MANUFACTURER            "ALLNET"
+    #define DEVICE                  "ESP8266_UP_Relais"
+
+    // Relays
+    #define RELAY1_PIN              14
+    #define RELAY1_RESET_PIN        12
+    #define RELAY1_TYPE             RELAY_TYPE_LATCHED
+
+    // LEDs
+    #define LED1_PIN                0
+    #define LED1_PIN_INVERSE        1
+
+    // Buttons
+    #define BUTTON1_PIN             4
+    #define BUTTON1_MODE            BUTTON_PUSHBUTTON
+    #define BUTTON1_PRESS           BUTTON_MODE_TOGGLE
+    #define BUTTON1_CLICK           BUTTON_MODE_NONE
+    #define BUTTON1_DBLCLICK        BUTTON_MODE_NONE
+    #define BUTTON1_LNGCLICK        BUTTON_MODE_NONE
+    #define BUTTON1_LNGLNGCLICK     BUTTON_MODE_NONE
+
+    #define BUTTON2_PIN             5
+    #define BUTTON2_MODE            BUTTON_PUSHBUTTON
+
+
 // -----------------------------------------------------------------------------
 // TEST boards (do not use!!)
 // -----------------------------------------------------------------------------
diff --git a/code/espurna/migrate.ino b/code/espurna/migrate.ino
index 8bf615a0..ae8edd9b 100644
--- a/code/espurna/migrate.ino
+++ b/code/espurna/migrate.ino
@@ -905,6 +905,13 @@ void migrate() {
             setSetting("relayType", 3, RELAY_TYPE_NORMAL);
             setSetting("relayType", 4, RELAY_TYPE_NORMAL);
 
+        #elif defined(ALLNET_ESP8266_UP)
+
+            setSetting("board", 71);
+            setSetting("relayGPIO", 0, 14);
+            setSetting("relayResetGPIO", 1, 12);
+            setSetting("relayType", 0, RELAY_TYPE_LATCHED);
+
         #else
 
             // Allow users to define new settings without migration config
diff --git a/code/platformio.ini b/code/platformio.ini
index db86f9e3..43d3234c 100644
--- a/code/platformio.ini
+++ b/code/platformio.ini
@@ -2054,3 +2054,27 @@ upload_speed = 115200
 upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 extra_scripts = ${common.extra_scripts}
+
+[env:allnet-esp8266-up-relay]
+platform = ${common.platform}
+framework = arduino
+board = esp12e
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DALLNET_ESP8266_UP
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:allnet-esp8266-up-relay-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp12e
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DALLNET_ESP8266_UP
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}