Merged in ColinShorts/espurna-colinshorts/dev (pull request #35)

Support for QuinLED 2.6

Approved-by: Xose Pérez <xose.perez@gmail.com>

code/espurna/config/arduino.h

@@ -40,6 +40,7 @@
 //#define JORGEGARCIA_WIFI_RELAYS
 //#define OPENENERGYMONITOR_MQTT_RELAY
 //#define HUACANXING_H802
+//#define QUINLED
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -957,6 +957,30 @@
     #define DS18B20_UPDATE_INTERVAL     5000
     #define DS18B20_UPDATE_ON_CHANGE    1.0
 
+// QuinLED
+// - http://blog.quindorian.org/2017/02/esp8266-led-lighting-quinled-v2-6-pcb.html/
+// -----------------------------------------------------------------------------
+
+#elif defined(QUINLED)
+
+    // Info
+    #define MANUFACTURER        "INTERMIT.TECH"
+    #define DEVICE              "QUINLED"
+    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT   1
+
+    // LEDs
+    #define LED1_PIN            5
+    #define LED1_PIN_INVERSE    1
+
+    // Channels
+    #define LIGHT_CH1_PIN       0
+    #define LIGHT_CH2_PIN       2
+
+    #define LIGHT_CH1_INVERSE   0
+    #define LIGHT_CH2_INVERSE   0
+
 // -----------------------------------------------------------------------------
 // Unknown hardware
 // -----------------------------------------------------------------------------

code/espurna/hardware.ino

@@ -467,6 +467,19 @@ void hwUpwardsCompatibility() {
         setSetting("relayType", 1, RELAY_TYPE_NORMAL);
         setSetting("relayType", 2, RELAY_TYPE_NORMAL);
 
+    #elif defined(QUINLED)
+
+        setSetting("board", 41);
+        setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+        setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
+        setSetting("ledGPIO", 1, 1);
+        setSetting("ledLogic", 1, 1);
+        setSetting("chGPIO", 1, 0);
+        setSetting("chGPIO", 2, 2);
+        setSetting("chLogic", 1, 0);
+        setSetting("chLogic", 2, 0);
+        setSetting("relays", 1);
+
     #else
 
         #error "UNSUPPORTED HARDWARE!"

code/platformio.ini

@@ -930,6 +930,29 @@ upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 
+[env:quinled]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DQUINLED
+monitor_baud = 115200
+
+[env:quinled-ota]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DQUINLED
+upload_speed = 115200
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+monitor_baud = 115200
+
 # ------------------------------------------------------------------------------
 # GENERIC OTA ENVIRONMENTS
 # ------------------------------------------------------------------------------