@ -4,7 +4,7 @@ ESPurna ("spark" in Catalan) is a custom firmware for ESP8266 based smart switch
It was originally developed with the **[IteadStudio Sonoff](https://www.itead.cc/sonoff-wifi-wireless-switch.html)** in mind but now it supports a growing number of ESP8266-based boards.
It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries.
**Current Release Version is 1.8.2**, read the [changelog](https://bitbucket.org/xoseperez/espurna/src/master/CHANGELOG.md).
**Current Release Version is 1.8.3**, read the [changelog](https://bitbucket.org/xoseperez/espurna/src/master/CHANGELOG.md).
The administrator password is used to access this web interface (user 'admin'), but also to connect to the device when in AP mode or to flash a new firmware over-the-air (OTA).<br/>
<divclass="pure-u-1 pure-u-md-3-4 hint">Delay in milliseconds to detect a double click (from 0 to 1000ms).<br/>
The lower this number the faster the device will respond to button clicks but the harder it will be to get a double click.
Increase this number if you are having trouble to double click the button.
Set this value to 0 to disable double click. You won't be able to set the device in AP mode manually but your device will respond immediately to button clicks.<br/>
You will have to <strong>reset the device</strong> after updating for this setting to apply.
The administrator password is used to access this web interface (user 'admin'), but also to connect to the device when in AP mode or to flash a new firmware over-the-air (OTA).<br/>
<inputclass="pure-u-1 pure-u-md-3-4"name="mqttPassword"type="password"size="20"tabindex="24"placeholder="Leave blank if no user/pass"/>
<inputclass="pure-u-1 pure-u-md-3-4"name="mqttPassword"type="password"size="20"tabindex="24"placeholder="Leave blank if no user/pass"autocomplete="false"/>
</div>
<divclass="pure-g">
@ -464,15 +486,27 @@
<divclass="pure-u-0 pure-u-md-1-4"> </div>
<divclass="pure-u-1 pure-u-md-3-4 hint">
This is the root topic for this device. A trailing slash will be added if not preset. The {identifier} placeholder will be replaces by the device hostname.<br/>
- <strong><root/>relay/#</strong> Send a 0 or a 1 as a payload to this topic to switch it on or off. You can also send a 2 to toggle its current state. Replace # with the switch ID (starting from 0). If the board has only one switch it will be 0.<br/>
<spanclass="module module-color">- <strong><root>color</strong> The device will report the current color in #RRGGBB format to this topic. You can also set the color using this same topic.<br/></span>
- <strong><root/>led/#</strong> Send a 0 or a 1 as a payload to this topic to set the onboard LED to the given state, send a 3 to turn it back to WIFI indicator. Replace # with the LED ID (starting from 0). If the board has only one LED it will be 0.<br/>
- <strong><root/>button/#</strong> For each button in the board subscribe to this topic to know when it is pressed (payload 1) or released (payload 0).<br/>
- <strong><root/>status</strong> The device will report a 1 to this topic every few minutes. Upon MQTT disconnecting this will be set to 0.<br/>
- <strong><root>/relay/#</strong> Send a 0 or a 1 as a payload to this topic to switch it on or off. You can also send a 2 to toggle its current state. Replace # with the switch ID (starting from 0). If the board has only one switch it will be 0.<br/>
<spanclass="module module-color">- <strong><root>/color</strong> The device will report the current color in #RRGGBB format to this topic. You can also set the color using this same topic.<br/></span>
- <strong><root>/led/#</strong> Send a 0 or a 1 as a payload to this topic to set the onboard LED to the given state, send a 3 to turn it back to WIFI indicator. Replace # with the LED ID (starting from 0). If the board has only one LED it will be 0.<br/>
- <strong><root>/button/#</strong> For each button in the board subscribe to this topic to know when it is pressed (payload 1) or released (payload 0).<br/>
- <strong><root>/status</strong> The device will report a 1 to this topic every few minutes. Upon MQTT disconnecting this will be set to 0.<br/>
- Other values reported (depending on the build) are: <strong>firmware</strong> and <strong>version</strong>, <strong>hostname</strong>, <strong>IP</strong>, <strong>MAC</strong>, signal strenth (<strong>RSSI</strong>), <strong>uptime</strong> (in seconds), <strong>free heap</strong> and <strong>power supply</strong>.
Xose Pérez
7 years ago