mh
/
mhsw-espurna
1
0
Fork 0
Code Releases 0 Activity
Browse Source

Add support for WiFi MQTT Relay / Thermostat from OpenEnergyMonitor here; https://guide.openenergymonitor.org/integrations/mqtt-relay/

fastled
denisfrench 7 years ago
parent
53516f892f
commit
7e6cb25552
4 changed files with 69 additions and 81 deletions
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +4
    -0
      README.md
  2. +45
    -81
      code/espurna/config/hardware.h
  3. +20
    -0
      code/platformio.ini
  4. BIN
      images/devices/wifi-relay.jpg

+ 4
- 0
README.md View File

@ -51,7 +51,11 @@ For more information please refer to the [ESPurna Wiki](https://bitbucket.org/xo
|![IteadStudio Sonoff Dual](images/devices/sonoff-dual.jpg) **IteadStudio Sonoff Dual**|![IteadStudio Sonoff POW](images/devices/sonoff-pow.jpg) **IteadStudio Sonoff POW**|![IteadStudio Sonoff TH10/TH16](images/devices/sonoff-th10-th16.jpg) **IteadStudio Sonoff TH10/TH16**|
|![IteadStudio Sonoff RF](images/devices/sonoff-rf.jpg) **IteadStudio Sonoff RF**|![IteadStudio Sonoff SV](images/devices/sonoff-sv.jpg) **IteadStudio Sonoff SV**|![IteadStudio Sonoff Touch](images/devices/sonoff-touch.jpg) **IteadStudio Sonoff Touch**|
|![Wemos D1 Mini Relay Shield](images/devices/d1mini.jpg) **Wemos D1 Mini Relay Shield**|![Electrodragon Relay Board](images/devices/electrodragon-relay-board.jpg) **Electrodragon Relay Board**|![WorkChoice EcoPlug](images/devices/workchoice-ecoplug.jpg) **WorkChoice EcoPlug**|
<<<<<<< HEAD
|![JanGoe Wifi Relay (NO/NC)](images/devices/jangoe-wifi-relay.png) **JanGoe Wifi Relay (NO/NC)**|||
=======
|![WiFi MQTT Relay / Thermostat](images/devices/wifi-relay.jpg) **WiFi MQTT Relay / Thermostat**|
>>>>>>> Add support for WiFi MQTT Relay / Thermostat from OpenEnergyMonitor here; https://guide.openenergymonitor.org/integrations/mqtt-relay/
## License


+ 45
- 81
code/espurna/config/hardware.h View File

@ -1,3 +1,35 @@
//--------------------------------------------------------------------------------
// HARDWARE
// This setting is normally provided by PlatformIO
// Uncomment the appropiate line to build from the Arduino IDE
//--------------------------------------------------------------------------------
//#define NODEMCUV2
//#define SONOFF
//#define SONOFF_TH
//#define SLAMPHER
//#define S20
//#define SONOFF_SV
//#define SONOFF_POW
//#define SONOFF_DUAL
//#define SONOFF_4CH
//#define ESP_RELAY_BOARD
//#define ECOPLUG
//#define ESPURNA
//#define WIFI_RELAY
//#define ENABLE_DHT 1
//#define ENABLE_DS18B20 1
//#define ENABLE_EMON 1
//#define ENABLE_HLW8018 1
//#define ENABLE_RF 1
//#define ENABLE_FAUXMO 0
//#define ENABLE_NOFUSS 1
#ifndef ENABLE_FAUXMO
#define ENABLE_FAUXMO 1
#endif
// -----------------------------------------------------------------------------
// Development boards
// -----------------------------------------------------------------------------
@ -7,9 +39,7 @@
#define MANUFACTURER "NODEMCU"
#define DEVICE "LOLIN"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 2
#define LED1_PIN_INVERSE 1
@ -18,7 +48,6 @@
#define MANUFACTURER "WEMOS"
#define DEVICE "D1_MINI"
#define RELAY1_PIN 5
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 2
#define LED1_PIN_INVERSE 1
@ -31,9 +60,7 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
@ -42,9 +69,7 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_TH"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
@ -53,9 +78,7 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_SV"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
@ -64,9 +87,7 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "SLAMPHER"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
@ -75,9 +96,7 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "S20"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
@ -86,9 +105,7 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_TOUCH"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
@ -97,9 +114,7 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_POW"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 15
#define LED1_PIN_INVERSE 0
#define ENABLE_POW 1
@ -119,42 +134,16 @@
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_4CH"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON2_PIN 9
#define BUTTON2_RELAY 2
#define BUTTON3_PIN 10
#define BUTTON3_RELAY 3
#define BUTTON4_PIN 14
#define BUTTON4_RELAY 4
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define RELAY2_PIN 5
#define RELAY2_PIN_INVERSE 0
#define RELAY3_PIN 4
#define RELAY3_PIN_INVERSE 0
#define RELAY4_PIN 15
#define RELAY4_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(ITEAD_1CH_INCHING)
// Note: definitions for this board are based on third party data
// and have not been fully tested yet. If you have the chance to
// test them, please report back. Thank you.
#define MANUFACTURER "ITEAD"
#define DEVICE "1CH_INCHING"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON2_PIN 15
#define BUTTON2_RELAY 0
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 0
#define LED_PULSE 14
// -----------------------------------------------------------------------------
// Electrodragon boards
// -----------------------------------------------------------------------------
@ -164,13 +153,9 @@
#define MANUFACTURER "ELECTRODRAGON"
#define DEVICE "ESP_RELAY_BOARD"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON2_PIN 2
#define BUTTON2_RELAY 2
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define RELAY2_PIN 13
#define RELAY2_PIN_INVERSE 0
#define LED1_PIN 16
#define LED1_PIN_INVERSE 0
@ -183,42 +168,10 @@
#define MANUFACTURER "WORKCHOICE"
#define DEVICE "ECOPLUG"
#define BUTTON1_PIN 13
#define BUTTON1_RELAY 1
#define RELAY1_PIN 15
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 2
#define LED1_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// JanGoe Wifi Relay (https://github.com/JanGoe/esp8266-wifi-relay)
// -----------------------------------------------------------------------------
#elif defined(WIFI_RELAY_NC)
#define MANUFACTURER "JANGOE"
#define DEVICE "WIFI_RELAY_NC"
#define BUTTON1_PIN 12
#define BUTTON1_RELAY 1
#define BUTTON2_PIN 13
#define BUTTON2_RELAY 2
#define RELAY1_PIN 2
#define RELAY1_PIN_INVERSE 1
#define RELAY2_PIN 14
#define RELAY2_PIN_INVERSE 1
#elif defined(WIFI_RELAY_NO)
#define MANUFACTURER "JANGOE"
#define DEVICE "WIFI_RELAY_NO"
#define BUTTON1_PIN 12
#define BUTTON1_RELAY 1
#define BUTTON2_PIN 13
#define BUTTON2_RELAY 2
#define RELAY1_PIN 2
#define RELAY1_PIN_INVERSE 0
#define RELAY2_PIN 14
#define RELAY2_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// ESPurna board (still beta)
// -----------------------------------------------------------------------------
@ -228,12 +181,23 @@
#define MANUFACTURER "TINKERMAN"
#define DEVICE "ESPURNA"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// WiFi MQTT Relay / Thermostat
// -----------------------------------------------------------------------------
#elif defined(WIFI_RELAY)
#define MANUFACTURER "OPENENERGYMONITOR"
#define DEVICE "WIFI_RELAY"
#define BUTTON1_PIN 0
#define RELAY1_PIN 12
#define LED1_PIN 16
#define LED1_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// Unknown hardware
// -----------------------------------------------------------------------------


+ 20
- 0
code/platformio.ini View File

@ -264,6 +264,7 @@ upload_speed = 115200
upload_port = "192.168.4.1"
upload_flags = --auth=fibonacci --port 8266
<<<<<<< HEAD
[env:jangoe-debug]
platform = espressif8266
framework = arduino
@ -281,6 +282,25 @@ lib_deps = ${common.lib_deps}
lib_ignore = ${common.lib_ignore}
extra_script = pio_hooks.py
build_flags = -g -DDEBUG_PORT=Serial -DWIFI_RELAY_NC
=======
[env:wifi-relay-debug]
platform = espressif8266
framework = arduino
board = esp_wroom_02
lib_deps = ${common.lib_deps}
lib_ignore = ${common.lib_ignore}
extra_script = pio_hooks.py
build_flags = -g -DDEBUG_PORT=Serial -DDEBUG_FAUXMO=Serial -DNOWSAUTH -DWIFI_RELAY -DENABLE_DS18B20=1
[env:wifi-relay-debug-ota]
platform = espressif8266
framework = arduino
board = esp_wroom_02
lib_deps = ${common.lib_deps}
lib_ignore = ${common.lib_ignore}
extra_script = pio_hooks.py
build_flags = -g -DDEBUG_PORT=Serial -DDEBUG_FAUXMO=Serial -DNOWSAUTH -DWIFI_RELAY -DENABLE_DS18B20=1
>>>>>>> Add support for WiFi MQTT Relay / Thermostat from OpenEnergyMonitor here; https://guide.openenergymonitor.org/integrations/mqtt-relay/
upload_speed = 115200
upload_port = "192.168.4.1"
upload_flags = --auth=fibonacci --port 8266

BIN
images/devices/wifi-relay.jpg View File

Before After
Width: 300  |  Height: 257  |  Size: 6.9 KiB

Write Preview
Loading…
Cancel
Save