Added support Authometion LYT8266 (testing)

code/espurna/config/arduino.h

@@ -50,6 +50,7 @@
 //#define INTERMITTECH_QUINLED
 //#define ARILUX_AL_LC06
 //#define XENON_SM_PW702U
+//#define AUTHOMETION_LYT8266
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -1136,6 +1136,33 @@
     #define LED1_PIN            4
     #define LED1_PIN_INVERSE    1
 
+// -----------------------------------------------------------------------------
+// AUTHOMETION LYT8266
+// https://authometion.com/shop/en/home/13-lyt8266.html
+// -----------------------------------------------------------------------------
+
+#elif defined(AUTHOMETION_LYT8266)
+
+    // Info
+    #define MANUFACTURER        "AUTHOMETION"
+    #define DEVICE              "LYT8266"
+    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT   1
+
+    // Channels
+    #define LIGHT_CH1_PIN       13      // RED
+    #define LIGHT_CH2_PIN       12      // GREEN
+    #define LIGHT_CH3_PIN       14      // BLUE
+    #define LIGHT_CH4_PIN       2       // WHITE
+
+    #define LIGHT_CH1_INVERSE   0
+    #define LIGHT_CH2_INVERSE   0
+    #define LIGHT_CH3_INVERSE   0
+    #define LIGHT_CH4_INVERSE   0
+
+    #define LIGHT_ENABLE_PIN    15
+
 // -----------------------------------------------------------------------------
 // Unknown hardware
 // -----------------------------------------------------------------------------

code/espurna/hardware.ino

@@ -541,6 +541,22 @@ void hwUpwardsCompatibility() {
         setSetting("relayGPIO", 1, 12);
         setSetting("relayType", 1, RELAY_TYPE_NORMAL);
 
+    #elif defined(AUTHOMETION_LYT8266)
+
+        setSetting("board", 45);
+        setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+        setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
+        setSetting("chGPIO", 1, 13);
+        setSetting("chGPIO", 2, 12);
+        setSetting("chGPIO", 3, 14);
+        setSetting("chGPIO", 4, 2);
+        setSetting("chLogic", 1, 0);
+        setSetting("chLogic", 2, 0);
+        setSetting("chLogic", 3, 0);
+        setSetting("chLogic", 4, 0);
+        setSetting("relays", 1);
+        setSetting("enGPIO", 15);
+
     #else
 
         #error "UNSUPPORTED HARDWARE!"

code/espurna/light.ino

@@ -226,6 +226,10 @@ void _lightProviderUpdate() {
 
     _shadow();
 
+    #ifdef LIGHT_ENABLE_PIN
+        digitalWrite(LIGHT_ENABLE_PIN, _lightState);
+    #endif
+
     #if LIGHT_PROVIDER == LIGHT_PROVIDER_MY9192
 
         if (_lightState) {
@@ -542,6 +546,10 @@ void _lightAPISetup() {
 
 void lightSetup() {
 
+    #ifdef LIGHT_ENABLE_PIN
+        pinMode(LIGHT_ENABLE_PIN, OUTPUT);
+    #endif
+
     #if LIGHT_PROVIDER == LIGHT_PROVIDER_MY9192
 
         _my9291 = new my9291(MY9291_DI_PIN, MY9291_DCKI_PIN, MY9291_COMMAND, MY9291_CHANNELS);

code/platformio.ini

@@ -1026,6 +1026,29 @@ upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 
+[env:authometion-lyt8266]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DAUTHOMETION_LYT8266
+monitor_baud = 115200
+
+[env:authometion-lyt8266-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DAUTHOMETION_LYT8266
+upload_speed = 115200
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+monitor_baud = 115200
+
 # ------------------------------------------------------------------------------
 # GENERIC OTA ENVIRONMENTS
 # ------------------------------------------------------------------------------