Added configuration for the new WIFI device sold by Obi (#1408)

* Added the configuration for the second generation OBI devices.

* Added link to the OBI Wifi Schuko Plug V2 as well as included the device in the readme.

* Restored the default configuration accidentially changed by a previous commit.

* Renamed the OBI-V2 device to EUROMATE_WIFI_STECKER_SCHUKO_V2 as suggested by mcspr.

* Fixed spelling of comment to the proper wording Schuko.

README.md

@@ -238,8 +238,10 @@ Here is the list of supported hardware. For more information please refer to the
 |**Electrodragon WiFi IOT**|**OpenEnergyMonitor WiFi MQTT Relay / Thermostat**||
 |![Itead S20](images/devices/itead-s20.jpg)|![Itead S20](images/devices/itead-s26.jpg)|![Neo Coolcam NAS WR01W](images/devices/neo-coolcam-wifi.jpg)|
 |**Itead S20**|**Itead S26**|**Neo Coolcam NAS WR01W**|
-|![Schuko Wifi Plug](images/devices/schuko-wifi-plug.jpg)|![KMC 70011](images/devices/kmc-70011.jpg)|![Xenon SM-PW702U](images/devices/xenon-sm-pw702u.jpg)|
-|**Schuko Wifi Plug**|**KMC 70011**|**Xenon SM-PW702U**|
+|![Schuko Wifi Plug](images/devices/schuko-wifi-plug.jpg)|![Schuko Wifi Plug V2](images/devices/schuko-wifi-plug-v2.jpg)|
+|**Schuko Wifi Plug**|**Schuko Wifi Plug V2**|
+|![KMC 70011](images/devices/kmc-70011.jpg)|![Xenon SM-PW702U](images/devices/xenon-sm-pw702u.jpg)||
+**KMC 70011**|**Xenon SM-PW702U**||
 |![Maxcio W-US002S](images/devices/maxcio-w-us002s.jpg)|![HEYGO HY02](images/devices/heygo-hy02.jpg)|![YiDian XS-SSA05](images/devices/yidian-xs-ssa05.jpg)|
 |**Maxcio W-US002S**|**HEYGO HY02**|**YiDian XS-SSA05**|
 |![WiOn 50055](images/devices/wion-50055.jpg)|![LINGAN SWA1](images/devices/lingan-swa1.jpg)|![HomeCube 16A](images/devices/homecube-16a.jpg)|

code/espurna/config/arduino.h

@@ -67,6 +67,7 @@
 //#define WEMOS_D1_TARPUNA_SHIELD
 //#define GIZWITS_WITTY_CLOUD
 //#define EUROMATE_WIFI_STECKER_SCHUKO
+//#define EUROMATE_WIFI_STECKER_SCHUKO_V2
 //#define TONBUX_POWERSTRIP02
 //#define LINGAN_SWA1
 //#define HEYGO_HY02

code/espurna/config/hardware.h

@@ -1817,7 +1817,7 @@
     #define HLW8012_VOLTAGE_R_UP            ( 2 * 1000000 )  // Upstream voltage resistor
 
 // -----------------------------------------------------------------------------
-// Euromate (?) Wifi Stecker Shuko
+// Euromate (?) Wifi Stecker Schuko
 // https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706
 // Thanks to @Geitde
 // -----------------------------------------------------------------------------
@@ -1847,6 +1847,36 @@
     #define LED1_PIN            4
     #define LED1_PIN_INVERSE    0
 
+// -----------------------------------------------------------------------------
+// Euromate (?) Wifi Stecker Schuko Version 2
+// This configuration is for the second generation of devices sold by OBI.
+// https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko-weiss/p/4077806
+// -----------------------------------------------------------------------------
+#elif defined(EUROMATE_WIFI_STECKER_SCHUKO_V2)
+
+    // Info
+    #define MANUFACTURER        "EUROMATE"
+    #define DEVICE              "WIFI_STECKER_SCHUKO_V2"
+
+    // Buttons
+    #define BUTTON1_PIN         5
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY       1
+
+    // Relays
+    #define RELAY1_PIN          4
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+
+    // Green
+    #define LED1_PIN            12
+    #define LED1_MODE           LED_MODE_WIFI
+    #define LED1_PIN_INVERSE    0
+
+    // Red
+    #define LED2_PIN            13
+    #define LED2_MODE           LED_MODE_RELAY
+    #define LED2_PIN_INVERSE    0
+
 // -----------------------------------------------------------------------------
 // Generic 8CH
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -1233,6 +1233,18 @@ void migrate() {
             setSetting("relayGPIO", 0, 5);
             setSetting("relayType", 0, RELAY_TYPE_NORMAL);
 
+        #elif defined(EUROMATE_WIFI_STECKER_SCHUKO_V2)
+
+            setSetting("board", 93);
+            setSetting("ledGPIO", 0, 13);      // Red LED
+            setSetting("ledLogic", 0, 1);
+            setSetting("ledGPIO", 1, 12);      // Green LED
+            setSetting("ledLogic", 1, 1);
+            setSetting("btnGPIO", 0, 5);
+            setSetting("btnRelay", 0, 0);
+            setSetting("relayGPIO", 0, 4);
+            setSetting("relayType", 0, RELAY_TYPE_NORMAL);
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -1940,6 +1940,31 @@ upload_port = ${common.upload_port}
 upload_flags = ${common.upload_flags}
 extra_scripts = ${common.extra_scripts}
 
+[env:euromate-wifi-stecker-shuko-v2]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_2m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_2m1m} -DEUROMATE_WIFI_STECKER_SCHUKO_V2
+monitor_speed = ${common.monitor_speed}
+extra_scripts = ${common.extra_scripts}
+
+[env:euromate-wifi-stecker-shuko-v2-ota]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_2m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_2m1m} -DEUROMATE_WIFI_STECKER_SCHUKO_V2
+upload_speed = ${common.upload_speed}
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
+monitor_speed = ${common.monitor_speed}
+extra_scripts = ${common.extra_scripts}
+
 [env:tonbux-powerstrip02]
 platform = ${common.platform}
 framework = ${common.framework}
@@ -2953,4 +2978,3 @@ upload_port = ${common.upload_port}
 upload_flags = ${common.upload_flags}
 monitor_speed = ${common.monitor_speed}
 extra_scripts = ${common.extra_scripts}
-