Added support for MagicHome LED Controller 2.0

code/espurna/config/hardware.h

@@ -706,6 +706,26 @@
     #define LIGHT_CH3_INVERSE   0
     #define LIGHT_CH4_INVERSE   0
 
+#elif defined(MAGICHOME_LED_CONTROLLER_2_0)
+
+    // Info
+    #define MANUFACTURER        "MAGICHOME"
+    #define DEVICE              "LED_CONTROLLER_2_0"
+    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT   1
+
+    // Channels
+    #define LIGHT_CH1_PIN       5       // RED
+    #define LIGHT_CH2_PIN       12      // GREEN
+    #define LIGHT_CH3_PIN       13      // BLUE
+    #define LIGHT_CH4_PIN       15      // WHITE
+
+    #define LIGHT_CH1_INVERSE   0
+    #define LIGHT_CH2_INVERSE   0
+    #define LIGHT_CH3_INVERSE   0
+    #define LIGHT_CH4_INVERSE   0
+
 // -----------------------------------------------------------------------------
 // HUACANXING H801
 // -----------------------------------------------------------------------------

code/espurna/hardware.ino

@@ -482,6 +482,21 @@ void hwUpwardsCompatibility() {
         setSetting("chLogic", 2, 0);
         setSetting("relays", 1);
 
+    #elif defined(MAGICHOME_LED_CONTROLLER_2_0)
+
+        setSetting("board", 42);
+        setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+        setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
+        setSetting("chGPIO", 1, 5);
+        setSetting("chGPIO", 2, 12);
+        setSetting("chGPIO", 3, 13);
+        setSetting("chGPIO", 4, 15);
+        setSetting("chLogic", 1, 0);
+        setSetting("chLogic", 2, 0);
+        setSetting("chLogic", 3, 0);
+        setSetting("chLogic", 4, 0);
+        setSetting("relays", 1);
+
     #else
 
         #error "UNSUPPORTED HARDWARE!"

code/platformio.ini

@@ -728,6 +728,28 @@ upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 
+[env:magichome-led-controller-2-0]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER_2_0
+monitor_baud = 115200
+
+[env:magichome-led-controller-2-0-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER_2_0
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+monitor_baud = 115200
+
 [env:huacanxing-h801]
 platform = ${common.platform}
 framework = arduino