ADDED SUPPORT FOR OUKITEL P1 SMART SWITCH (#1553)

Added initial support for Oukitel Smart Switch. This is a 2 outlet plug
that has the same pinout as the YiDian XS-SSA05.

code/espurna/config/arduino.h

@@ -73,6 +73,7 @@
 //#define LINGAN_SWA1
 //#define HEYGO_HY02
 //#define MAXCIO_WUS002S
+//#define OUKITEL_P1
 //#define YIDIAN_XSSSA05
 //#define TONBUX_XSSSA06
 //#define TONBUX_XSSSA01

code/espurna/config/hardware.h

@@ -2101,6 +2101,38 @@
     #define LED1_PIN			13
     #define LED1_PIN_INVERSE	1
 
+// -----------------------------------------------------------------------------
+// Oukitel - P1
+// -----------------------------------------------------------------------------
+
+#elif defined(OUKITEL_P1)
+    // -----------------------------------------------------------------------------
+    // Oukitel P1 Smart Plug
+    // https://www.amazon.com/Docooler-OUKITEL-Control-Wireless-Adaptor/dp/B07J3BYFJX/ref=sr_1_fkmrnull_2?keywords=oukitel+p1+smart+switch&qid=1550424399&s=gateway&sr=8-2-fkmrnull
+    // -----------------------------------------------------------------------------
+
+    // Info
+    #define MANUFACTURER		"Oukitel"
+    #define DEVICE				"P1"
+
+    // Buttons
+    #define BUTTON1_PIN			13
+    #define BUTTON1_MODE		BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY		1
+
+    // Relays
+    // Right
+    #define RELAY1_PIN			12
+    #define RELAY1_TYPE			RELAY_TYPE_NORMAL
+    // Left
+    #define RELAY2_PIN			15
+    #define RELAY2_TYPE			RELAY_TYPE_NORMAL
+
+    // LEDs
+    #define LED1_PIN			0  // blue
+    #define LED1_PIN_INVERSE	1
+    #define LED1_MODE           LED_MODE_WIFI
+
 // -----------------------------------------------------------------------------
 // YiDian XS-SSA05
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -1256,6 +1256,19 @@ void migrate() {
             setSetting("relayGPIO", 0, 4);
             setSetting("relayType", 0, RELAY_TYPE_NORMAL);
 
+        #elif defined(OUKITEL_P1)
+
+            setSetting("board", 94);
+            setSetting("ledGPIO", 0, 0); // Blue LED
+            setSetting("ledLogic", 0, 0);
+            setSetting("btnGPIO", 0, 13);
+            setSetting("btnRelay", 0, 0);
+            setSetting("relayGPIO", 0, 12);  // Right outlet
+            setSetting("relayType", 0, RELAY_TYPE_NORMAL);
+            setSetting("relayGPIO", 1, 15);  // Left outlet
+            setSetting("relayType", 1, RELAY_TYPE_NORMAL);
+            
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -2208,6 +2208,30 @@ upload_port = ${common.upload_port}
 upload_flags = ${common.upload_flags}
 extra_scripts = ${common.extra_scripts}
 
+[env:oukitel-p1]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_1m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DOUKITEL_P1
+monitor_speed = ${common.monitor_speed}
+extra_scripts = ${common.extra_scripts}
+
+[env:oukitel-p1-ota]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_1m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DOUKITEL_P1
+upload_speed = ${common.upload_speed}
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
+extra_scripts = ${common.extra_scripts}
+
 [env:tonbux-xsssa01]
 platform = ${common.platform}
 framework = ${common.framework}
@@ -3103,4 +3127,4 @@ upload_speed = ${common.upload_speed}
 upload_port = ${common.upload_port}
 upload_flags = ${common.upload_flags}
 monitor_speed = ${common.monitor_speed}
-extra_scripts = ${common.extra_scripts}
+extra_scripts = ${common.extra_scripts}