Link issue numbers in CHANGELOG.md and README.md to the issue page

CHANGELOG.md

@@ -6,56 +6,56 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 ## [1.12.1] 2018-01-14
 ### Added
 - Option to perform a WiFi network scan from web UI
-- Added hostname to web UI side menu (#404)
+- Added hostname to web UI side menu ([#404](https://github.com/xoseperez/espurna/issues/404))
 - Option to flash multiple devices with ESPurna OTA Manager
 
 ### Fixed
-- Fix web UI layout so signature does not overlay buttons (#396)
-- Option to disable network scan and allow connecting to hidden SSID (#392, #399)
-- Fix crash caused by a delay in UDP debugging code (#397)
-- Fix memory leak in influxDB module (#410)
-- Fix typos in web UI (#394, #421)
+- Fix web UI layout so signature does not overlay buttons ([#396](https://github.com/xoseperez/espurna/issues/396))
+- Option to disable network scan and allow connecting to hidden SSID ([#392](https://github.com/xoseperez/espurna/issues/392), [#399](https://github.com/xoseperez/espurna/issues/399))
+- Fix crash caused by a delay in UDP debugging code ([#397](https://github.com/xoseperez/espurna/issues/397))
+- Fix memory leak in influxDB module ([#410](https://github.com/xoseperez/espurna/issues/410))
+- Fix typos in web UI ([#394](https://github.com/xoseperez/espurna/issues/394), [#421](https://github.com/xoseperez/espurna/issues/421))
 
 ### Changed
 - Updated to fauxmoESP 2.4.2
-- Changed default I2C GPIO for Wemos D1 (#420)
+- Changed default I2C GPIO for Wemos D1 ([#420](https://github.com/xoseperez/espurna/issues/420))
 - Some terminal commands have changed. See docs or type "help".
 
 ## [1.12.0] 2018-01-11
 ### Added
-- Scheduler (contributed by Stefano Cotterli, thank you!, #131)
+- Scheduler (contributed by Stefano Cotterli, thank you!, [#131](https://github.com/xoseperez/espurna/issues/131))
 - Added "wifi.scan" command to terminal
 - Added ESPurna Switch board support
 - Added support for python3 in memanalyzer and ota scripts (thanks to Ryan Jarvis)
 - Added BSSID, RSSI, channels and distance to web UI status tab
-- Added mDNS name resolving to MQTT, InfluxDB and NoFUSS modules (#129, disabled by default)
+- Added mDNS name resolving to MQTT, InfluxDB and NoFUSS modules ([#129](https://github.com/xoseperez/espurna/issues/129), disabled by default)
 
 ### Fixed
-- Update FauxmoESP library to 2.4.1, solves dependency issue (#388)
-- Fixed hardware definition in Sonoff Basic and Dual R2 causing wrong relay state on boot (#365)
+- Update FauxmoESP library to 2.4.1, solves dependency issue ([#388](https://github.com/xoseperez/espurna/issues/388))
+- Fixed hardware definition in Sonoff Basic and Dual R2 causing wrong relay state on boot ([#365](https://github.com/xoseperez/espurna/issues/365))
 
 ### Changed
-- Removed auto-recursion check in Domoticz module (#379)
+- Removed auto-recursion check in Domoticz module ([#379](https://github.com/xoseperez/espurna/issues/379))
 - Rename terminal commands: reset.wifi to wifi.reset, reset.mqtt to mqtt.reset.
 - Update JustWifi library to 1.1.6 (support for multiple SSIDs with the same name)
-- Changed the way Home Assistant module handles disabling auto-discovery (#383)
+- Changed the way Home Assistant module handles disabling auto-discovery ([#383](https://github.com/xoseperez/espurna/issues/383))
 
 ## [1.11.4] 2018-01-09
 ### Fixed
-- Fix bug in RF Bridge when RF code contains the stop byte. Check overflow (#357)
+- Fix bug in RF Bridge when RF code contains the stop byte. Check overflow ([#357](https://github.com/xoseperez/espurna/issues/357))
 - Fixed typos in code and wiki (Thanks to Ryan Jarvis)
-- Fix bug in magnitude topic and units (#355)
+- Fix bug in magnitude topic and units ([#355](https://github.com/xoseperez/espurna/issues/355))
 
 ### Added
 - Small core build to allow two-step flashing method for big binaries
-- Thingspeak support (#371, disabled by default)
-- Color synchronization between lights using MQTT (#362)
-- Support for Arilux AL-LC02 (#347)
+- Thingspeak support ([#371](https://github.com/xoseperez/espurna/issues/371), disabled by default)
+- Color synchronization between lights using MQTT ([#362](https://github.com/xoseperez/espurna/issues/362))
+- Support for Arilux AL-LC02 ([#347](https://github.com/xoseperez/espurna/issues/347))
 - Support for Tarpuna Shield for Wemos D1
-- Build option to disable password checking (#373)
-- Option to report sensor address via MQTT (#377, I2C address, GPIO, Dallas address,...)
+- Build option to disable password checking ([#373](https://github.com/xoseperez/espurna/issues/373))
+- Option to report sensor address via MQTT ([#377](https://github.com/xoseperez/espurna/issues/377), I2C address, GPIO, Dallas address,...)
 - Added binary size to memanalyzer script
-- Option to specify custom client ID for MQTT connection (#368)
+- Option to specify custom client ID for MQTT connection ([#368](https://github.com/xoseperez/espurna/issues/368))
 - Cross-platform ESPurna OTA Manager implemented in python (untested)
 - Terminal command to get or set digital GPIO
 
@@ -63,27 +63,27 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Using 2.3.0 for prebuilt binaries
 - Fix delay in DHT sensor
 - Allow MQTT keep alive value of up to 3600s
-- Changed Sonoff 4CH Pro definitions to support built-in interlock mode (#333)
+- Changed Sonoff 4CH Pro definitions to support built-in interlock mode ([#333](https://github.com/xoseperez/espurna/issues/333))
 
 ## [1.11.3] 2018-01-02
 ### Fixed
-- Fix uninitialized PWM channels bug (#356)
+- Fix uninitialized PWM channels bug ([#356](https://github.com/xoseperez/espurna/issues/356))
 
 ### Added
 - Added memory analyzer
 
 ## [1.11.2] 2017-12-30
 ### Fixed
-- Fix my92xx and pwm references for Arduino IDE (#346)
-- Fix SHT3X I2C sensor magnitude count (#337)
-- Fix timing for DHT11 sensors (#294)
-- Fix overflow in relayParsePayload with long MQTT messages (#344)
-- Fix loading of Dallas and DHT sensors for Sonoff TH images (#352)
+- Fix my92xx and pwm references for Arduino IDE ([#346](https://github.com/xoseperez/espurna/issues/346))
+- Fix SHT3X I2C sensor magnitude count ([#337](https://github.com/xoseperez/espurna/issues/337))
+- Fix timing for DHT11 sensors ([#294](https://github.com/xoseperez/espurna/issues/294))
+- Fix overflow in relayParsePayload with long MQTT messages ([#344](https://github.com/xoseperez/espurna/issues/344))
+- Fix loading of Dallas and DHT sensors for Sonoff TH images ([#352](https://github.com/xoseperez/espurna/issues/352))
 - Subscribe to Domoticz MQTT topics only if Domotic< is enabled
 
 ### Added
-- Added option to change MQTT retain flag, QoS and keepalive time from webUI (#321)
-- Added LED modes "always off" and "always on" (#348)
+- Added option to change MQTT retain flag, QoS and keepalive time from webUI ([#321](https://github.com/xoseperez/espurna/issues/321))
+- Added LED modes "always off" and "always on" ([#348](https://github.com/xoseperez/espurna/issues/348))
 - Defined new ESPurna switch (no HLW8012 support & touch button ready)
 
 ### Changed
@@ -100,12 +100,12 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [1.11.0] 2017-12-28
 ### Fixed
-- Fixed Arduino IDE compilation issues (#330)
+- Fixed Arduino IDE compilation issues ([#330](https://github.com/xoseperez/espurna/issues/330))
 - Fixed issues with IE
 - Fixed websocket auth issue with Safari (temporary)
 - Fixed MQTT group sync when different switches share same group
-- Fixed casting issue in buttonStore (#327)
-- Fixed crash in InfluxDB initial heartbeat (#318)
+- Fixed casting issue in buttonStore ([#327](https://github.com/xoseperez/espurna/issues/327))
+- Fixed crash in InfluxDB initial heartbeat ([#318](https://github.com/xoseperez/espurna/issues/318))
 - Fixed LED logic for ESPurna H08 board
 
 ### Added
@@ -116,54 +116,54 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Option to select sensor read interval and report interval from web UI
 - Itead RF Bridge
   + Match MQTT RFOUT codes to relays
-  + Force RFBridge to send messages even if switch is already in requested state (#324)
+  + Force RFBridge to send messages even if switch is already in requested state ([#324](https://github.com/xoseperez/espurna/issues/324))
   + Implemented RFbridge message queue asynchronously
-- Added option to load config via HTTP POST & reset (#335)
-- Added option to define behaviour of the first LED between WIFI, MQTT, FIND-ME (#317)
+- Added option to load config via HTTP POST & reset ([#335](https://github.com/xoseperez/espurna/issues/335))
+- Added option to define behaviour of the first LED between WIFI, MQTT, FIND-ME ([#317](https://github.com/xoseperez/espurna/issues/317))
 - Added HTML linter to gulp builder
-- Added Help command on terminal (#338)
-- Added preliminary support for SSDP (untested, disabled by default) (#282)
+- Added Help command on terminal ([#338](https://github.com/xoseperez/espurna/issues/338))
+- Added preliminary support for SSDP (untested, disabled by default) ([#282](https://github.com/xoseperez/espurna/issues/282))
 - Reporting NTP datetime on MQTT heartbeat (thanks to Eldon R. Brown)
 - Added version tracking and migration code
 - I2C and GPIO locking features
-- Changed default button action for touch button devices (TOUCH and T1) (#327)
-- Generic 8 channel board (#336)
+- Changed default button action for touch button devices (TOUCH and T1) ([#327](https://github.com/xoseperez/espurna/issues/327))
+- Generic 8 channel board ([#336](https://github.com/xoseperez/espurna/issues/336))
 
 ### Changed
 - Added more sensor data filters (Max, MobileAverage)
-- Changed max pulse time to 1h (#316)
-- Renamed "reset" to "reboot" for clarity (#315)
+- Changed max pulse time to 1h ([#316](https://github.com/xoseperez/espurna/issues/316))
+- Renamed "reset" to "reboot" for clarity ([#315](https://github.com/xoseperez/espurna/issues/315))
 - UI refactor
 - Change apiRegister signature
 
 ## [1.10.1] 2017-12-05
 ### Fixed
-- Fix Sonoff RFBridge learn message from web UI (#287)
-- Fix unstability in "one and just one" sync mode (#290)
-- Fix unnecessary inclusion of my92xx library (#293)
-- Limit the MQTT queue to 10 messages when "Use JSON payload" enabled (#296)
-- Fix Sonoff RFBridge OFF button toggling switch (#303)
-- Allow defining only ON or OFF codes in Sonoff RFBridge (#304)
-- Disabled terminal support for Sonoff Dual (#310)
+- Fix Sonoff RFBridge learn message from web UI ([#287](https://github.com/xoseperez/espurna/issues/287))
+- Fix unstability in "one and just one" sync mode ([#290](https://github.com/xoseperez/espurna/issues/290))
+- Fix unnecessary inclusion of my92xx library ([#293](https://github.com/xoseperez/espurna/issues/293))
+- Limit the MQTT queue to 10 messages when "Use JSON payload" enabled ([#296](https://github.com/xoseperez/espurna/issues/296))
+- Fix Sonoff RFBridge OFF button toggling switch ([#303](https://github.com/xoseperez/espurna/issues/303))
+- Allow defining only ON or OFF codes in Sonoff RFBridge ([#304](https://github.com/xoseperez/espurna/issues/304))
+- Disabled terminal support for Sonoff Dual ([#310](https://github.com/xoseperez/espurna/issues/310))
 
 ### Added
-- Support for SI7021-based sensor by Itead Studio compatible with Sonoff TH (#216)
-- Support for Sonoff Dual R2 (#286)
-- MQTT group topics (sync two or more switches from different devices, #300)
+- Support for SI7021-based sensor by Itead Studio compatible with Sonoff TH ([#216](https://github.com/xoseperez/espurna/issues/216))
+- Support for Sonoff Dual R2 ([#286](https://github.com/xoseperez/espurna/issues/286))
+- MQTT group topics (sync two or more switches from different devices, [#300](https://github.com/xoseperez/espurna/issues/300))
 - Color transitions (enabled by default, can be disabled from web UI)
 - Option to disable MQTT support at build time
 
 ### Changed
 - Decreased PWM frequency for dimmer lights
-- Changed password policy (#297)
+- Changed password policy ([#297](https://github.com/xoseperez/espurna/issues/297))
 
 ## [1.10.0] 2017-11-26
 ### Fixed
 - Temperatures with 1 decimal resolution
 - Issues with Sonoff B1 due to bad driver management (using my92xx library now)
-- Avoid recursive messages on Domoticz (#272)
+- Avoid recursive messages on Domoticz ([#272](https://github.com/xoseperez/espurna/issues/272))
 - Fixed Sonoff T1 configuration
-- Simplify and fix web auth (#284)
+- Simplify and fix web auth ([#284](https://github.com/xoseperez/espurna/issues/284))
 - Fix Embedis custom parser
 
 ### Added
@@ -171,16 +171,16 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Option to disable system check on build time
 - Power saving features (loopDelay and wifi sleep)
 - Added Sonoff TH build environment
-- Send Home Assistant auto discover messages on connect (#279)
-- Implemented Home Assistant availability topic (#280)
+- Send Home Assistant auto discover messages on connect ([#279](https://github.com/xoseperez/espurna/issues/279))
+- Implemented Home Assistant availability topic ([#280](https://github.com/xoseperez/espurna/issues/280))
 - Update time, uptime and heap on webUI every heartbeat
-- Support for LLMNR and NetBIOS (#282)
+- Support for LLMNR and NetBIOS ([#282](https://github.com/xoseperez/espurna/issues/282))
 - Added I2C clean bus code
 - Added realm to auth challenge
 
 ### Changed
 - Changed default hostname to "ESPURNA_XXXXXX"
-- Binaries built against stable core (~40Kb less, #274)
+- Binaries built against stable core (~40Kb less, [#274](https://github.com/xoseperez/espurna/issues/274))
 - Enabled TERMINAL_SUPPORT for Sonoff Dual (only available via TELNET)
 - Dinamically resize debug strings (now messages are not cropped)
 - MQTT: unsubscribe to '#' before subscribing
@@ -194,7 +194,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Fixed bug in MY9291-based light bulbs at full brightness
 
 ### Added
-- RFBridge: toggle when RF codes for ON and OFF are the same (#270)
+- RFBridge: toggle when RF codes for ON and OFF are the same ([#270](https://github.com/xoseperez/espurna/issues/270))
 - Support for HSV color schema (MQTT, API and webUI via a selector)
 
 ### Changed
@@ -202,9 +202,9 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [1.9.8] 2017-11-08
 ### Fixed
-- Removed dimmer lights flicker when saving to EEPROM (#191)
-- Fixed low brightness in dimmer lights (#157)
-- Fixed blank fields in energy (#258, #259)
+- Removed dimmer lights flicker when saving to EEPROM ([#191](https://github.com/xoseperez/espurna/issues/191))
+- Fixed low brightness in dimmer lights ([#157](https://github.com/xoseperez/espurna/issues/157))
+- Fixed blank fields in energy ([#258](https://github.com/xoseperez/espurna/issues/258), [#259](https://github.com/xoseperez/espurna/issues/259))
 - Fixed support for Arilux AL-LC06
 - Updated fauxmoESP library with support for GetBinaryState actions
 
@@ -223,42 +223,42 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [1.9.7] 2017-10-25
 ### Fixed
-- Fix Alexa interface switching on all lights (#256)
+- Fix Alexa interface switching on all lights ([#256](https://github.com/xoseperez/espurna/issues/256))
 
 ## [1.9.6] 2017-10-23
 ### Fixed
-- Fix power report in Domoticz (#236)
-- Fix Sonoff POW in AP mode (#241)
-- Fix Home Automation auto-discovery (support for single relay switches and RGB lights, #235)
+- Fix power report in Domoticz ([#236](https://github.com/xoseperez/espurna/issues/236))
+- Fix Sonoff POW in AP mode ([#241](https://github.com/xoseperez/espurna/issues/241))
+- Fix Home Automation auto-discovery (support for single relay switches and RGB lights, [#235](https://github.com/xoseperez/espurna/issues/235))
 - Check WS authentication only on start event
 
 ### Added
-- Support for 2.4.0 RC2 Arduino Core that fixes KRACK vulnerablity (pre-built images are compiled against this, #242)
+- Support for 2.4.0 RC2 Arduino Core that fixes KRACK vulnerablity (pre-built images are compiled against this, [#242](https://github.com/xoseperez/espurna/issues/242))
 - Support for ManCaveMade ESPLive board (thanks to Michael A. Cox)
 - Support for InterMIT Tech QuinLED 2.6 (thanks to Colin Shorts)
-- Support for Magic Home LED Controller 2.0 (thanks to users @gimi87 and @soif, #231)
+- Support for Magic Home LED Controller 2.0 (thanks to users @gimi87 and @soif, [#231](https://github.com/xoseperez/espurna/issues/231))
 - Support for Arilux AL-LC06 (thanks to Martijn Kruissen)
-- Support for Xenon SM-PW702U Wifi boards (thanks to Joshua Harden, #212)
-- Support for Authometion LYT8266 (testing, thanks to Joe Blellik, #213)
-- Support for an external button for D1 Mini boards (thanks to user @PieBru, #239)
+- Support for Xenon SM-PW702U Wifi boards (thanks to Joshua Harden, [#212](https://github.com/xoseperez/espurna/issues/212))
+- Support for Authometion LYT8266 (testing, thanks to Joe Blellik, [#213](https://github.com/xoseperez/espurna/issues/213))
+- Support for an external button for D1 Mini boards (thanks to user @PieBru, [#239](https://github.com/xoseperez/espurna/issues/239))
 - Option to query relay status via MQTT or WS (thanks to Wesley Tuzza)
 - Automatically install dependencies for web interface builder (thanks to Hermann Kraus)
 - Support for HSV and IR for Magic Home LED Controller (optional, disabled by default, thanks to Wesley Tuzza)
 - Added option to report DS18B20 temperatures based on changes (thanks to Michael A. Cox)
 - Safer buffer handling for websocket data (thanks to Hermann Kraus & Björn Bergman)
 - Updates HL8012 library with energy counting support (thanks to Hermann Kraus)
-- Added option to disable light color persistence to avoid flickering (#191)
-- Option to enable TELNET in STA mode from web UI (#203)
+- Added option to disable light color persistence to avoid flickering ([#191](https://github.com/xoseperez/espurna/issues/191))
+- Option to enable TELNET in STA mode from web UI ([#203](https://github.com/xoseperez/espurna/issues/203))
 
 ### Changed
-- Changed default MQTT base topic to "{identifier}" (no leading slashes, #208)
-- Prevent reconnecting when in AP mode if a web session or a telnet session is active (#244)
-- Web UI checks for pending changes before reset/reconnect options (#226)
+- Changed default MQTT base topic to "{identifier}" (no leading slashes, [#208](https://github.com/xoseperez/espurna/issues/208))
+- Prevent reconnecting when in AP mode if a web session or a telnet session is active ([#244](https://github.com/xoseperez/espurna/issues/244))
+- Web UI checks for pending changes before reset/reconnect options ([#226](https://github.com/xoseperez/espurna/issues/226))
 - Increase WIFI connect timeout and reconnect interval
 
 ## [1.9.5] 2017-09-28
 ### Fixed
-- Revert to JustWifi 1.1.4 (#228)
+- Revert to JustWifi 1.1.4 ([#228](https://github.com/xoseperez/espurna/issues/228))
 
 ## [1.9.4] 2017-09-22
 ### Added
@@ -269,14 +269,14 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Support for powermeters based on ECH1560 IC (beta, untested)
 
 ### Changed
-- Changed behaviour on MQTT connection failure (#215)
+- Changed behaviour on MQTT connection failure ([#215](https://github.com/xoseperez/espurna/issues/215))
 - Removed boot delay
 - Refactor power modules
 - Updated JustWifi library
 
 ### Fixed
-- Set all esp8285 devices to use esp01_1m (#210, #225)
-- Removed wifi gain option since it prevents some devices to connect (#204)
+- Set all esp8285 devices to use esp01_1m ([#210](https://github.com/xoseperez/espurna/issues/210), [#225](https://github.com/xoseperez/espurna/issues/225))
+- Removed wifi gain option since it prevents some devices to connect ([#204](https://github.com/xoseperez/espurna/issues/204))
 
 ## [1.9.3] 2017-09-04
 ### Added
@@ -289,13 +289,13 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Updated fauxmoESP library to 2.2.0
 
 ### Fixed
-- Fix HLW8012 calibration (#194)
+- Fix HLW8012 calibration ([#194](https://github.com/xoseperez/espurna/issues/194))
 - Fix telnet dropping connection
-- Fix WiFiSecureClient connection with PubSubClient (#64)
+- Fix WiFiSecureClient connection with PubSubClient ([#64](https://github.com/xoseperez/espurna/issues/64))
 
 ## [1.9.2] 2017-08-31
 ### Added
-- System stability check (turns off everything except WIFI AP, OTA and telnet if there is a boot crash loop) (#196)
+- System stability check (turns off everything except WIFI AP, OTA and telnet if there is a boot crash loop) ([#196](https://github.com/xoseperez/espurna/issues/196))
 - Telnet support (enabled by default only on AP interface)
 - Option to set WiFi gain from web UI
 - Option to disable MQTT from web UI
@@ -310,7 +310,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Changes in terminal commands ("reconnect" is now "reset.wifi", also new commands added)
 
 ### Fixed
-- Crash in settings saving (#190) and fixed UDP debug conditional build clauses
+- Crash in settings saving ([#190](https://github.com/xoseperez/espurna/issues/190)) and fixed UDP debug conditional build clauses
 
 ## [1.9.1] 2017-08-27
 ### Added
@@ -324,44 +324,44 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 ### Fixed
 - Fixed build flags for DHT and DS18B20 in platformio.ini file
 - Fixed Itead Sonoff B1 by updating the my9291 library
-- Fixed light status on boot (#157)
+- Fixed light status on boot ([#157](https://github.com/xoseperez/espurna/issues/157))
 - Fixed CSS bug cause by a bad merge
 
 ## [1.9.0] 2017-08-25
 ### Added
-- Support for IteadStudio BN-SZ01 Ceiling Light (#132)
-- Support for IteadStudio Sonoff RF Bridge (#173)
-- Support for IteadStudio Sonoff 4CH Pro (#174)
+- Support for IteadStudio BN-SZ01 Ceiling Light ([#132](https://github.com/xoseperez/espurna/issues/132))
+- Support for IteadStudio Sonoff RF Bridge ([#173](https://github.com/xoseperez/espurna/issues/173))
+- Support for IteadStudio Sonoff 4CH Pro ([#174](https://github.com/xoseperez/espurna/issues/174))
 - Support for IteadStudio Sonoff B1
 - Support for IteadStudio Sonoff LED
 - Support for IteadStudio Sonoff T1 wall switches (1, 2 and 4 channels)
 - Support for WiOn 50055 WiFi Wall Outlet & Tap
-- Support for EXS WiFi Relay v3.1 (and other future latching relay boards) (#152)
-- TLS/SSL support for MQTT (caution: eats a lot of memory, do not use with web interface) (#64)
-- Add support for delayed ON/OFF switches (#123, #161, #188)
-- Added ON and OFF actions for button events (previously only TOGGLE available) (#182)
+- Support for EXS WiFi Relay v3.1 (and other future latching relay boards) ([#152](https://github.com/xoseperez/espurna/issues/152))
+- TLS/SSL support for MQTT (caution: eats a lot of memory, do not use with web interface) ([#64](https://github.com/xoseperez/espurna/issues/64))
+- Add support for delayed ON/OFF switches ([#123](https://github.com/xoseperez/espurna/issues/123), [#161](https://github.com/xoseperez/espurna/issues/161), [#188](https://github.com/xoseperez/espurna/issues/188))
+- Added ON and OFF actions for button events (previously only TOGGLE available) ([#182](https://github.com/xoseperez/espurna/issues/182))
 - Sliders in web interface to control dimmer channels independently (also for brightness)
 - Debug info about MQTT disconnect reason
 
 ### Changed
 - MQTT setters ending with "/set" by default
-- Using DOUT flash mode on all devices (#167)
+- Using DOUT flash mode on all devices ([#167](https://github.com/xoseperez/espurna/issues/167))
 - Longer timeout for WiFi connection (better chances for Sonoff Basic to connect)
-- Changed MQTT topics for light devices (COLOR, BRIGHTNESS, MIRED, KELVIN, CHANNEL) (#144)
+- Changed MQTT topics for light devices (COLOR, BRIGHTNESS, MIRED, KELVIN, CHANNEL) ([#144](https://github.com/xoseperez/espurna/issues/144))
 - Changed the way light devices are defined (see LIGHT_PROVIDER_DIMMER)
 - Allow to disable color picker in web interface
-- API returns processed values for HLW8012 sensor (not raw values anymore) (#176)
+- API returns processed values for HLW8012 sensor (not raw values anymore) ([#176](https://github.com/xoseperez/espurna/issues/176))
 - Major refactoring of settings
 
 ### Fixed
-- Discard MQTT messages with empty payload (#185)
+- Discard MQTT messages with empty payload ([#185](https://github.com/xoseperez/espurna/issues/185))
 - Wifi connection issue (https://github.com/esp8266/Arduino/issues/2186)
 - Alexa connection issue
 
 ## [1.8.3] 2017-07-23
 ### Added
-- Issue #85 and #90. Option to report MQTT messages with JSON payloads
-- Issue #170. Updated DebouceEvent library to allow disabling double click and get faster click responses
+- Issue [#85](https://github.com/xoseperez/espurna/issues/85) and [#90](https://github.com/xoseperez/espurna/issues/90). Option to report MQTT messages with JSON payloads
+- Issue [#170](https://github.com/xoseperez/espurna/issues/170). Updated DebouceEvent library to allow disabling double click and get faster click responses
 - Using memory layout with no SPIFFS for 1Mb devices
 
 ### Changed
@@ -369,8 +369,8 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Return times in ISO8601 format
 
 ### Fixed
-- Issue #168. Added H801 to arduino.h file
-- Issue #171. Fix corrupted will message
+- Issue [#168](https://github.com/xoseperez/espurna/issues/168). Added H801 to arduino.h file
+- Issue [#171](https://github.com/xoseperez/espurna/issues/171). Fix corrupted will message
 
 ## [1.8.2] 2017-07-16
 ### Added
@@ -379,45 +379,45 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Enable WIFI debug on hardware reset (button long click)
 
 ### Changed
-- Issue #159. Allow decimals in relay pulse interval
+- Issue [#159](https://github.com/xoseperez/espurna/issues/159). Allow decimals in relay pulse interval
 - Updated HLW8012 library
 
 ### Fixed
-- Issue #148. Fix bug in conditional compilation check
-- Issue #149. Using different pulse counters for each relay (thanks to Lauris Ieviņš)
-- Issue #141. Limit relay pulse interval to 60s
+- Issue [#148](https://github.com/xoseperez/espurna/issues/148). Fix bug in conditional compilation check
+- Issue [#149](https://github.com/xoseperez/espurna/issues/149). Using different pulse counters for each relay (thanks to Lauris Ieviņš)
+- Issue [#141](https://github.com/xoseperez/espurna/issues/141). Limit relay pulse interval to 60s
 - Fixed units for apparent & reactive power (thanks to Lauris Ieviņš)
 - Fixed mDNS setup when using custom HTTP port for web interface
 
 ## [1.8.1] 2017-05-22
 ### Fixed
-- Issue #140. Fix no relay control bug in Sonoff Dual
+- Issue [#140](https://github.com/xoseperez/espurna/issues/140). Fix no relay control bug in Sonoff Dual
 
 ## [1.8.0] 2017-05-21
 ### Added
 - Added gamma correction to RGB strips. Thanks to Chris Ward.
 - Added support for Huacanxing H801 WiFi LED Controller. Thanks to Minh Phuong Ly.
-- Issue #138. Added NTP configuration from web interface
-- Issue #128. Report color when booting and in heartbeat stream.
-- Issue #126. Show NTP status in web interface.
+- Issue [#138](https://github.com/xoseperez/espurna/issues/138). Added NTP configuration from web interface
+- Issue [#128](https://github.com/xoseperez/espurna/issues/128). Report color when booting and in heartbeat stream.
+- Issue [#126](https://github.com/xoseperez/espurna/issues/126). Show NTP status in web interface.
 - Added filter limits on POW readings.
 - Added color temperature to RGB calculation. Thanks to Sacha Telgenhof.
-- Issue #120. Added relay flood protection. Thanks to Izik Dubnov.
+- Issue [#120](https://github.com/xoseperez/espurna/issues/120). Added relay flood protection. Thanks to Izik Dubnov.
 - Support for "#RRGGBB", "RRR,GGG,BBB" and "WWW" color formats.
-- Issue #117. Added build date & time to web interface.
+- Issue [#117](https://github.com/xoseperez/espurna/issues/117). Added build date & time to web interface.
 
 ### Fixed
 - Fix MQTT_RELAY board conifugration. Thanks to Denis French.
-- Issue #125. Fix bug in relay status reading from EEPROM
-- Issue #127. Fix button action in DUAL.
+- Issue [#125](https://github.com/xoseperez/espurna/issues/125). Fix bug in relay status reading from EEPROM
+- Issue [#127](https://github.com/xoseperez/espurna/issues/127). Fix button action in DUAL.
 - Fix bug in Sonoff POW current reading. Thanks to Emmanuel Tatto.
 - Minimizing my9291 flickering when booting.
 - Fix conditional flags in hardware.ino to support Arduino IDE.
 
 ## [1.7.1] 2017-03-28
 ### Fixed
-- Issue #113. Fix restoring color from EEPROM upon reboot
-- Issue #113. Fix bug in API handlers
+- Issue [#113](https://github.com/xoseperez/espurna/issues/113). Fix restoring color from EEPROM upon reboot
+- Issue [#113](https://github.com/xoseperez/espurna/issues/113). Fix bug in API handlers
 
 ## [1.7.0] 2017-03-27
 ### Added
@@ -436,10 +436,10 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Prevent the SDK from saving WiFi configuration to flash
 
 ### Fixed
-- Issue #113. Fix light bulb state to OFF in library prevented the bulb from turning on
-- Issue #58. Added code to handle spurious readings
+- Issue [#113](https://github.com/xoseperez/espurna/issues/113). Fix light bulb state to OFF in library prevented the bulb from turning on
+- Issue [#58](https://github.com/xoseperez/espurna/issues/58). Added code to handle spurious readings
 - Fix bug in HLW8012 calibration current parameter casting to int instead of float
-- Issue #115. Removed local declaration of _mqttForward variable. Thanks to Paweł Fiedor
+- Issue [#115](https://github.com/xoseperez/espurna/issues/115). Removed local declaration of _mqttForward variable. Thanks to Paweł Fiedor
 - Fix MQTT will topic. Thanks to Asbjorn Tronhus
 
 ## [1.6.9] 2017-03-12
@@ -456,27 +456,27 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [1.6.8] 2017-03-01
 ### Added
-- Issue #85. Heartbeat reports now free heap, uptime and VCC every 5 minutes
+- Issue [#85](https://github.com/xoseperez/espurna/issues/85). Heartbeat reports now free heap, uptime and VCC every 5 minutes
 
 ### Changed
 - Wait two minutes instead of one in AP mode before trying to reconnect to the router
-- Issue #92. Debug log enabled by default in Arduino IDE
-- Issue #91. Using AsyncMqttClient as default MQTT client again
+- Issue [#92](https://github.com/xoseperez/espurna/issues/92). Debug log enabled by default in Arduino IDE
+- Issue [#91](https://github.com/xoseperez/espurna/issues/91). Using AsyncMqttClient as default MQTT client again
 
 ### Fixed
 - Report data from all sensors via websocket even if no MQTT connection
-- Issue #92. Fix unknown reference in Arduino IDE
+- Issue [#92](https://github.com/xoseperez/espurna/issues/92). Fix unknown reference in Arduino IDE
 - Split data.h contents into 1k lines, otherwise Arduino IDE chokes on them
 - Discard empty MQTT topic while subscribing
 
 ## [1.6.7] 2017-02-25
 ### Added
 - Support for OpenLight / AI-Light by AI-Thinker based on MY9291 LED driver
-- Issue #87. Factory reset when physical button pressed for >10 seconds
+- Issue [#87](https://github.com/xoseperez/espurna/issues/87). Factory reset when physical button pressed for >10 seconds
 
 ## [1.6.6] 2017-02-23
 ### Fixed
-- Issue #82. Fix critical bug on Sonoff Dual
+- Issue [#82](https://github.com/xoseperez/espurna/issues/82). Fix critical bug on Sonoff Dual
 
 ## [1.6.5] 2017-02-22
 ### Added
@@ -488,8 +488,8 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Double & long clicks do nothing except for the first defined button
 
 ### Fixed
-- Issue #79. Fix bug in WiFi led notification & MQTT connectivity (using PubSubClient)
-- Issue #73. Fix bug when building without Domoticz support
+- Issue [#79](https://github.com/xoseperez/espurna/issues/79). Fix bug in WiFi led notification & MQTT connectivity (using PubSubClient)
+- Issue [#73](https://github.com/xoseperez/espurna/issues/73). Fix bug when building without Domoticz support
 - Fix Gulp tasks dependencies
 
 ## [1.6.4] 2017-02-20
@@ -499,8 +499,8 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Support for PROGMEM debug messages (only wifi module has been changed)
 - Option to disable mDNS, enabled by default
 - Show current web server port in debug log
-- Issue #75. Link relays to LEDs
-- Issue #76. Using http://espurna.local when in AP mode
+- Issue [#75](https://github.com/xoseperez/espurna/issues/75). Link relays to LEDs
+- Issue [#76](https://github.com/xoseperez/espurna/issues/76). Using http://espurna.local when in AP mode
 
 ### Changed
 - Images and favicon is now embedded in the HTML
@@ -510,16 +510,16 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 ### Fixed
 - Memory leak in MQTT connection method
 - Wait 60 seconds before retrying to connect when in AP mode
-- Issue #24 & #74. Update ESPAsyncTCP and ESPAsyncWebServer to latest GIT version that supports MSS defragmenting
-- Issue #73. Fixes for windows machines
+- Issue [#24](https://github.com/xoseperez/espurna/issues/24) & [#74](https://github.com/xoseperez/espurna/issues/74). Update ESPAsyncTCP and ESPAsyncWebServer to latest GIT version that supports MSS defragmenting
+- Issue [#73](https://github.com/xoseperez/espurna/issues/73). Fixes for windows machines
 
 ### Removed
 - Captive portal removed, mDNS resolution for AP mode too
 
 ## [1.6.3] 2017-02-15
 ### Added
-- Issue #69. Temperature unit configuration from the web interface
-- Issue #55. WebServer port configurable from the web interface, defaults to 80
+- Issue [#69](https://github.com/xoseperez/espurna/issues/69). Temperature unit configuration from the web interface
+- Issue [#55](https://github.com/xoseperez/espurna/issues/55). WebServer port configurable from the web interface, defaults to 80
 - Expand network configuration when adding a new network
 
 ### Changed
@@ -528,7 +528,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Scan for strongest network only if more than 1 network configured
 
 ### Fixed
-- Issue #71. Added default values for netmask and DNS in web configuration
+- Issue [#71](https://github.com/xoseperez/espurna/issues/71). Added default values for netmask and DNS in web configuration
 - Fixed Itead 1CH self-locking/inching board definition
 - Fixed PlatformIO environments for ESP8285 boards (4CH and Touch)
 
@@ -560,11 +560,11 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [1.5.4] 2017-02-03
 ### Fixed
-- Issue #50. Fix type bug in window variable when calculating energy for HLW8012 devices (Sonoff POW)
+- Issue [#50](https://github.com/xoseperez/espurna/issues/50). Fix type bug in window variable when calculating energy for HLW8012 devices (Sonoff POW)
 
 ## [1.5.3] 2017-02-02
 ### Fixed
-- Issue #50 and #54. Fixed domoticz MQTT message format
+- Issue [#50](https://github.com/xoseperez/espurna/issues/50) and [#54](https://github.com/xoseperez/espurna/issues/54). Fixed domoticz MQTT message format
 
 ### Added
 - Energy calculation and aggregation. API entry points and MQTT messages.
@@ -597,9 +597,9 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 ### Fixed
 - MQTT will topic
 - Crash with HLW812 interrupts while trying to create a WIFI connection
-- Issue #20 Better inline documentation for Alexa and Domoticz default settings
-- Issue #39 Fixed autoconnect issue with static IP (fixed in JustWifi library)
-- Issue #41 Added password requirements to initial password change page
+- Issue [#20](https://github.com/xoseperez/espurna/issues/20) Better inline documentation for Alexa and Domoticz default settings
+- Issue [#39](https://github.com/xoseperez/espurna/issues/39) Fixed autoconnect issue with static IP (fixed in JustWifi library)
+- Issue [#41](https://github.com/xoseperez/espurna/issues/41) Added password requirements to initial password change page
 
 ### Changed
 - Changed LED pattern for WIFI notifications (shorter pulses)
@@ -609,7 +609,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Adding current, voltage, apparent and reactive power reports to Sonoff POW (Web & MQTT)
 
 ### Fixed
-- Issue #35 Fixed frequent MQTT connection drops after WIFI reconnect
+- Issue [#35](https://github.com/xoseperez/espurna/issues/35) Fixed frequent MQTT connection drops after WIFI reconnect
 - Defer wifi disconnection from web interface to allow request to return
 
 ### Changed
@@ -618,14 +618,14 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [1.4.3] 2017-01-11
 ### Fixed
-- Issue #6 Using forked Time library to prevent conflict with Arduino Core for ESP8266 time.h file in windows machines
+- Issue [#6](https://github.com/xoseperez/espurna/issues/6) Using forked Time library to prevent conflict with Arduino Core for ESP8266 time.h file in windows machines
 
 ## [1.4.2] 2017-01-09
 ### Added
 - Support for inverse logic relays
 
 ### Fixed
-- Issue #31. Fixed error in relay identification from MQTT messages
+- Issue [#31](https://github.com/xoseperez/espurna/issues/31). Fixed error in relay identification from MQTT messages
 
 ## [1.4.1] 2017-01-05
 ### Added
@@ -641,7 +641,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Support for static IP connections
 
 ### Fixed
-- Issue #16. Enforce minimum password strength in web interface
+- Issue [#16](https://github.com/xoseperez/espurna/issues/16). Enforce minimum password strength in web interface
 
 ### Changed
 - Using default client_id provided by AsyncMqttClient
@@ -678,9 +678,9 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Skipping retained MQTT messages (configurable)
 
 ### Fixed
-- Issue #11 Compile error when building sonoff-dual-debug
-- Issue #14 MQTT Connection with Username an Password not working
-- Issue #17 Moved static variable 'pending' to class variable
+- Issue [#11](https://github.com/xoseperez/espurna/issues/11) Compile error when building sonoff-dual-debug
+- Issue [#14](https://github.com/xoseperez/espurna/issues/14) MQTT Connection with Username an Password not working
+- Issue [#17](https://github.com/xoseperez/espurna/issues/17) Moved static variable 'pending' to class variable
 
 ## [1.1.0] 2016-12-06
 ### Added

README.md

@@ -32,7 +32,7 @@ Read the [changes log](https://github.com/xoseperez/espurna/blob/master/CHANGELO
     * Support for **MQTT groups** to sync switches between devices
     * Support for **delayed ON/OFF**
 * **MQTT** enabled
-    * **SSL/TLS support** (not on regular builds, see #64)
+    * **SSL/TLS support** (not on regular builds, see [#64](https://github.com/xoseperez/espurna/issues/64))
     * Switch on/off and toggle relays, group topics (sync relays between different devices)
     * Report button event notifications
     * Enable/disable pulse mode
@@ -134,7 +134,7 @@ Read the [changes log](https://github.com/xoseperez/espurna/blob/master/CHANGELO
 > **2017-08-26**: since version 1.9.0 the default **MQTT topics for commands have changed**. They all now end with "/set". This means you will have to change your controller software (Node-RED or alike) to send messages to -for instance- "/home/living/light/relay/0/set". The device will publish its state in "/home/living/light/relay/0" like before.
 
 ---
-> **2017-07-24**: Default flash layout changed in 1.8.3, as an unpredicted consequence devices will not be able to persist/retrieve configuration if flashed with 1.8.3 via **OTA** from **PlatformIO**. Please check issue #187.
+> **2017-07-24**: Default flash layout changed in 1.8.3, as an unpredicted consequence devices will not be able to persist/retrieve configuration if flashed with 1.8.3 via **OTA** from **PlatformIO**. Please check issue [#187](https://github.com/xoseperez/espurna/issues/187).
 
 ---