Changes to the ALLNET 4duino IoT WLAN relay

code/espurna/config/arduino.h

@@ -80,7 +80,7 @@
 //#define HELTEC_TOUCHRELAY
 //#define ZHILDE_EU44_W
 //#define LUANI_HVIO
-//#define ALLNET_ESP8266_UP
+//#define ALLNET_4DUINO_IOT_WLAN_RELAIS
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -2000,13 +2000,14 @@
     // -----------------------------------------------------------------------------
     // Allnet 4duino ESP8266-UP-Relais
     // http://www.allnet.de/de/allnet-brand/produkte/neuheiten/p/allnet-4duino-iot-wlan-relais-unterputz-esp8266-up-relais/
+    // https://shop.allnet.de/fileadmin/transfer/products/148814.pdf
     // -----------------------------------------------------------------------------
 
-#elif defined(ALLNET_ESP8266_UP)
+#elif defined(ALLNET_4DUINO_IOT_WLAN_RELAIS)
 
     // Info
     #define MANUFACTURER            "ALLNET"
-    #define DEVICE                  "ESP8266_UP_Relais"
+    #define DEVICE                  "4DUINO_IOT_WLAN_RELAIS"
 
     // Relays
     #define RELAY1_PIN              14
@@ -2018,16 +2019,24 @@
     #define LED1_PIN_INVERSE        1
 
     // Buttons
-    #define BUTTON1_PIN             4
-    #define BUTTON1_MODE            BUTTON_PUSHBUTTON
-    #define BUTTON1_PRESS           BUTTON_MODE_TOGGLE
-    #define BUTTON1_CLICK           BUTTON_MODE_NONE
-    #define BUTTON1_DBLCLICK        BUTTON_MODE_NONE
-    #define BUTTON1_LNGCLICK        BUTTON_MODE_NONE
-    #define BUTTON1_LNGLNGCLICK     BUTTON_MODE_NONE
+    //#define BUTTON1_PIN             0
+    //#define BUTTON1_MODE            BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
 
-    #define BUTTON2_PIN             5
+    // Using pins labelled as SDA & SCL as buttons
+    #define BUTTON2_PIN             4
     #define BUTTON2_MODE            BUTTON_PUSHBUTTON
+    #define BUTTON2_PRESS           BUTTON_MODE_TOGGLE
+    #define BUTTON2_CLICK           BUTTON_MODE_NONE
+    #define BUTTON2_DBLCLICK        BUTTON_MODE_NONE
+    #define BUTTON2_LNGCLICK        BUTTON_MODE_NONE
+    #define BUTTON2_LNGLNGCLICK     BUTTON_MODE_NONE
+
+    #define BUTTON3_PIN             5
+    #define BUTTON3_MODE            BUTTON_PUSHBUTTON
+
+    // Using pins labelled as SDA & SCL for I2C
+    //#define I2C_SDA_PIN             4
+    //#define I2C_SCL_PIN             5
 
 
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -930,11 +930,11 @@ void migrate() {
             setSetting("relayGPIO", 1, 5);
             setSetting("relayType", 1, RELAY_TYPE_NORMAL);
 
-        #elif defined(ALLNET_ESP8266_UP)
+        #elif defined(ALLNET_4DUINO_IOT_WLAN_RELAIS)
 
             setSetting("board", 73);
             setSetting("relayGPIO", 0, 14);
-            setSetting("relayResetGPIO", 1, 12);
+            setSetting("relayResetGPIO", 0, 12);
             setSetting("relayType", 0, RELAY_TYPE_LATCHED);
 
         #else

code/platformio.ini

@@ -2105,25 +2105,25 @@ upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 extra_scripts = ${common.extra_scripts}
 
-[env:allnet-esp8266-up-relay]
+[env:allnet-4duino-iot-wlan-relais]
 platform = ${common.platform}
 framework = arduino
 board = esp12e
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DALLNET_ESP8266_UP
+build_flags = ${common.build_flags_1m} -DALLNET_4DUINO_IOT_WLAN_RELAIS
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
-[env:allnet-esp8266-up-relay-ota]
+[env:allnet-4duino-iot-wlan-relais-ota]
 platform = ${common.platform}
 framework = arduino
 board = esp12e
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DALLNET_ESP8266_UP
+build_flags = ${common.build_flags_1m} -DALLNET_4DUINO_IOT_WLAN_RELAIS
 upload_speed = 115200
 upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266