mh
/
mhsw-espurna
1
0
Fork 0
Code Releases 0 Activity
Browse Source

Merge branch 'dev' of https://github.com/xoseperez/espurna into CCT_Support

rfm69
Niklas Wagner 6 years ago
parent
20adc846a9 42b2974790
commit
a4e01774b7
20 changed files with 646 additions and 577 deletions
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +3
    -0
      code/espurna/config/all.h
  2. +0
    -8
      code/espurna/config/defaults.h
  3. +66
    -0
      code/espurna/config/dependencies.h
  4. +167
    -339
      code/espurna/config/general.h
  5. +104
    -0
      code/espurna/config/progmem.h
  6. +3
    -0
      code/espurna/config/prototypes.h
  7. +10
    -226
      code/espurna/config/sensors.h
  8. +244
    -0
      code/espurna/config/types.h
  9. +3
    -0
      code/espurna/sensors/AM2320Sensor.h
  10. +4
    -0
      code/espurna/sensors/AnalogSensor.h
  11. +3
    -0
      code/espurna/sensors/BH1750Sensor.h
  12. +3
    -0
      code/espurna/sensors/BMX280Sensor.h
  13. +4
    -0
      code/espurna/sensors/EmonAnalogSensor.h
  14. +4
    -0
      code/espurna/sensors/EmonSensor.h
  15. +4
    -0
      code/espurna/sensors/GUVAS12SDSensor.h
  16. +4
    -0
      code/espurna/sensors/SHT3XI2CSensor.h
  17. +5
    -0
      code/espurna/sensors/SI7021Sensor.h
  18. +4
    -0
      code/espurna/sensors/TMP3XSensor.h
  19. +8
    -3
      code/espurna/utils.ino
  20. +3
    -1
      code/espurna/ws.ino

+ 3
- 0
code/espurna/config/all.h View File

@ -24,12 +24,15 @@
#endif
#include "version.h"
#include "types.h"
#include "arduino.h"
#include "hardware.h"
#include "defaults.h"
#include "general.h"
#include "prototypes.h"
#include "sensors.h"
#include "progmem.h"
#include "dependencies.h"
#ifdef USE_CORE_VERSION_H
#include "core_version.h"


+ 0
- 8
code/espurna/config/defaults.h View File

@ -404,14 +404,6 @@
#define HOSTNAME ""
#endif
// Needed for ESP8285 boards under Windows using PlatformIO (?)
#ifndef BUTTON_PUSHBUTTON
#define BUTTON_PUSHBUTTON 0
#define BUTTON_SWITCH 1
#define BUTTON_DEFAULT_HIGH 2
#define BUTTON_SET_PULLUP 4
#endif
// Relay providers
#ifndef RELAY_PROVIDER
#define RELAY_PROVIDER RELAY_PROVIDER_RELAY


+ 66
- 0
code/espurna/config/dependencies.h View File

@ -0,0 +1,66 @@
#pragma once
//------------------------------------------------------------------------------
// Do not change this file unless you know what you are doing
// Configuration settings are in the general.h file
//------------------------------------------------------------------------------
#if DEBUG_TELNET_SUPPORT
#undef TELNET_SUPPORT
#define TELNET_SUPPORT 1
#endif
#if not WEB_SUPPORT
#undef DEBUG_WEB_SUPPORT
#define DEBUG_WEB_SUPPORT 0
#endif
#if not WEB_SUPPORT
#undef SSDP_SUPPORT
#define SSDP_SUPPORT 0 // SSDP support requires web support
#endif
#if UART_MQTT_SUPPORT
#define MQTT_SUPPORT 1
#undef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT 0
#undef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT 0
#endif
#if DOMOTICZ_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Domoticz enabled enable MQTT
#endif
#if HOMEASSISTANT_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Home Assistant enabled enable MQTT
#endif
#ifndef ASYNC_TCP_SSL_ENABLED
#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC
#undef THINGSPEAK_SUPPORT // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED
#endif
#endif
#if SCHEDULER_SUPPORT
#undef NTP_SUPPORT
#define NTP_SUPPORT 1 // Scheduler needs NTP
#endif
// -----------------------------------------------------------------------------
// Debug
// -----------------------------------------------------------------------------
#define DEBUG_SUPPORT DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT || DEBUG_WEB_SUPPORT
#if DEBUG_SUPPORT
#define DEBUG_MSG(...) debugSend(__VA_ARGS__)
#define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)
#endif
#ifndef DEBUG_MSG
#define DEBUG_MSG(...)
#define DEBUG_MSG_P(...)
#endif

+ 167
- 339
code/espurna/config/general.h View File

@ -10,36 +10,17 @@
#define DEVICE_NAME MANUFACTURER "_" DEVICE // Concatenate both to get a unique device name
#ifndef ADMIN_PASS
#define ADMIN_PASS "fibonacci" // Default password (WEB, OTA, WIFI)
#define ADMIN_PASS "fibonacci" // Default password (WEB, OTA, WIFI)
#endif
#ifndef USE_PASSWORD
#define USE_PASSWORD 1 // Insecurity caution! Disabling this will disable password querying completely.
#define USE_PASSWORD 1 // Insecurity caution! Disabling this will disable password querying completely.
#endif
#ifndef LOOP_DELAY_TIME
#define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250]
#define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250]
#endif
#define ARRAYINIT(type, name, ...) \
type name[] = {__VA_ARGS__};
//------------------------------------------------------------------------------
// TELNET
//------------------------------------------------------------------------------
#ifndef TELNET_SUPPORT
#define TELNET_SUPPORT 1 // Enable telnet support by default (3.34Kb)
#endif
#ifndef TELNET_STA
#define TELNET_STA 0 // By default, disallow connections via STA interface
#endif
#define TELNET_PORT 23 // Port to listen to telnet clients
#define TELNET_MAX_CLIENTS 1 // Max number of concurrent telnet clients
//------------------------------------------------------------------------------
// DEBUG
//------------------------------------------------------------------------------
@ -70,7 +51,7 @@
#endif
#ifndef SERIAL_RX_PORT
#define SERIAL_RX_PORT Serial // This setting is usually defined
#define SERIAL_RX_PORT Serial // This setting is usually defined
// in the hardware.h file for those
// boards that require it
#endif
@ -100,44 +81,30 @@
//------------------------------------------------------------------------------
#ifndef DEBUG_TELNET_SUPPORT
#define DEBUG_TELNET_SUPPORT TELNET_SUPPORT // Enable telnet debug log if telnet is enabled too
#endif
#if DEBUG_TELNET_SUPPORT
#undef TELNET_SUPPORT
#define TELNET_SUPPORT 1
#define DEBUG_TELNET_SUPPORT 1 // Enable telnet debug log (will only work if TELNET_SUPPORT is also 1)
#endif
//------------------------------------------------------------------------------
#ifndef DEBUG_WEB_SUPPORT
#define DEBUG_WEB_SUPPORT WEB_SUPPORT // Enable web debug log if web is enabled too
#endif
#if DEBUG_WEB_SUPPORT
#undef WEB_SUPPORT
#define WEB_SUPPORT 1 // Chicken and egg :)
#endif
#ifndef DEBUG_WEB_ENABLED
#define DEBUG_WEB_ENABLED 1 // Enable debug output by default
#define DEBUG_WEB_SUPPORT 1 // Enable web debug log (will only work if WEB_SUPPORT is also 1)
#endif
//------------------------------------------------------------------------------
// TELNET
//------------------------------------------------------------------------------
// General debug options and macros
#define DEBUG_SUPPORT DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT
#if DEBUG_SUPPORT
#define DEBUG_MSG(...) debugSend(__VA_ARGS__)
#define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)
#ifndef TELNET_SUPPORT
#define TELNET_SUPPORT 1 // Enable telnet support by default (3.34Kb)
#endif
#ifndef DEBUG_MSG
#define DEBUG_MSG(...)
#define DEBUG_MSG_P(...)
#ifndef TELNET_STA
#define TELNET_STA 0 // By default, disallow connections via STA interface
#endif
#define TELNET_PORT 23 // Port to listen to telnet clients
#define TELNET_MAX_CLIENTS 1 // Max number of concurrent telnet clients
//------------------------------------------------------------------------------
// TERMINAL
//------------------------------------------------------------------------------
@ -156,7 +123,9 @@
#define SYSTEM_CHECK_ENABLED 1 // Enable crash check by default
#endif
#ifndef SYSTEM_CHECK_MAX
#define SYSTEM_CHECK_TIME 60000 // The system is considered stable after these many millis
#endif
#ifndef SYSTEM_CHECK_MAX
#define SYSTEM_CHECK_MAX 5 // After this many crashes on boot
@ -183,7 +152,10 @@
#define HEARTBEAT_ENABLED 1
#endif
#ifndef HEARTBEAT_INTERVAL
#define HEARTBEAT_INTERVAL 300000 // Interval between heartbeat messages (in ms)
#endif
#define UPTIME_OVERFLOW 4294967295 // Uptime overflow value
// Topics that will be reported in heartbeat
@ -206,48 +178,15 @@
//------------------------------------------------------------------------------
// Load average
//------------------------------------------------------------------------------
#ifndef LOADAVG_INTERVAL
#define LOADAVG_INTERVAL 30000 // Interval between calculating load average (in ms)
#define LOADAVG_INTERVAL 30000 // Interval between calculating load average (in ms)
#endif
#ifndef LOADAVG_REPORT
#define LOADAVG_REPORT 1 // Should we report Load average over MQTT?
#define LOADAVG_REPORT 1 // Should we report Load average over MQTT?
#endif
//------------------------------------------------------------------------------
// RESET
//------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button
#define CUSTOM_RESET_WEB 2 // Reset from web interface
#define CUSTOM_RESET_TERMINAL 3 // Reset from terminal
#define CUSTOM_RESET_MQTT 4 // Reset via MQTT
#define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA 6 // Reset after successful OTA update
#define CUSTOM_RESET_HTTP 7 // Reset via HTTP GET
#define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface
#define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal
#define CUSTOM_RESET_MAX 10
PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reboot from web interface";
PROGMEM const char custom_reset_terminal[] = "Reboot from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reboot from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reboot from RPC";
PROGMEM const char custom_reset_ota[] = "Reboot after successful OTA update";
PROGMEM const char custom_reset_http[] = "Reboot from HTTP";
PROGMEM const char custom_reset_nofuss[] = "Reboot after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reboot after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
custom_reset_hardware, custom_reset_web, custom_reset_terminal,
custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
custom_reset_http, custom_reset_nofuss, custom_reset_upgrade,
custom_reset_factory
};
//------------------------------------------------------------------------------
// BUTTON
//------------------------------------------------------------------------------
@ -268,52 +207,10 @@ PROGMEM const char* const custom_reset_string[] = {
#define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click
#endif
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
#define BUTTON_EVENT_RELEASED 2
#define BUTTON_EVENT_CLICK 2
#define BUTTON_EVENT_DBLCLICK 3
#define BUTTON_EVENT_LNGCLICK 4
#define BUTTON_EVENT_LNGLNGCLICK 5
#define BUTTON_MODE_NONE 0
#define BUTTON_MODE_TOGGLE 1
#define BUTTON_MODE_ON 2
#define BUTTON_MODE_OFF 3
#define BUTTON_MODE_AP 4
#define BUTTON_MODE_RESET 5
#define BUTTON_MODE_PULSE 6
#define BUTTON_MODE_FACTORY 7
//------------------------------------------------------------------------------
// RELAY
//------------------------------------------------------------------------------
#define RELAY_BOOT_OFF 0
#define RELAY_BOOT_ON 1
#define RELAY_BOOT_SAME 2
#define RELAY_BOOT_TOGGLE 3
#define RELAY_TYPE_NORMAL 0
#define RELAY_TYPE_INVERSE 1
#define RELAY_TYPE_LATCHED 2
#define RELAY_TYPE_LATCHED_INVERSE 3
#define RELAY_SYNC_ANY 0
#define RELAY_SYNC_NONE_OR_ONE 1
#define RELAY_SYNC_ONE 2
#define RELAY_SYNC_SAME 3
#define RELAY_PULSE_NONE 0
#define RELAY_PULSE_OFF 1
#define RELAY_PULSE_ON 2
#define RELAY_PROVIDER_RELAY 0
#define RELAY_PROVIDER_DUAL 1
#define RELAY_PROVIDER_LIGHT 2
#define RELAY_PROVIDER_RFBRIDGE 3
#define RELAY_PROVIDER_STM 4
// Default boot mode: 0 means OFF, 1 ON and 2 whatever was before
#ifndef RELAY_BOOT_MODE
#define RELAY_BOOT_MODE RELAY_BOOT_OFF
@ -354,102 +251,87 @@ PROGMEM const char* const custom_reset_string[] = {
#define RELAY_SAVE_DELAY 1000
#endif
//------------------------------------------------------------------------------
// LED
//------------------------------------------------------------------------------
#define LED_MODE_MQTT 0 // LED will be managed from MQTT (OFF by default)
#define LED_MODE_WIFI 1 // LED will blink according to the WIFI status
#define LED_MODE_FOLLOW 2 // LED will follow state of linked relay (check RELAY#_LED)
#define LED_MODE_FOLLOW_INVERSE 3 // LED will follow the opposite state of linked relay (check RELAY#_LED)
#define LED_MODE_FINDME 4 // LED will be ON if all relays are OFF
#define LED_MODE_FINDME_WIFI 5 // A mixture between WIFI and FINDME
#define LED_MODE_ON 6 // LED always ON
#define LED_MODE_OFF 7 // LED always OFF
#define LED_MODE_RELAY 8 // If any relay is ON, LED will be ON, otherwise OFF
#define LED_MODE_RELAY_WIFI 9 // A mixture between WIFI and RELAY, the reverse of MIXED
// -----------------------------------------------------------------------------
// WIFI
// -----------------------------------------------------------------------------
#ifndef WIFI_CONNECT_TIMEOUT
#define WIFI_CONNECT_TIMEOUT 60000 // Connecting timeout for WIFI in ms
#define WIFI_CONNECT_TIMEOUT 60000 // Connecting timeout for WIFI in ms
#endif
#ifndef WIFI_RECONNECT_INTERVAL
#define WIFI_RECONNECT_INTERVAL 180000 // If could not connect to WIFI, retry after this time in ms
#define WIFI_RECONNECT_INTERVAL 180000 // If could not connect to WIFI, retry after this time in ms
#endif
#define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations
#define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations
#ifndef WIFI_AP_MODE
#define WIFI_AP_MODE AP_MODE_ALONE
#define WIFI_AP_MODE AP_MODE_ALONE
#endif
#ifndef WIFI_SLEEP_MODE
#define WIFI_SLEEP_MODE WIFI_NONE_SLEEP // WIFI_NONE_SLEEP, WIFI_LIGHT_SLEEP or WIFI_MODEM_SLEEP
#define WIFI_SLEEP_MODE WIFI_NONE_SLEEP // WIFI_NONE_SLEEP, WIFI_LIGHT_SLEEP or WIFI_MODEM_SLEEP
#endif
#ifndef WIFI_SCAN_NETWORKS
#define WIFI_SCAN_NETWORKS 1 // Perform a network scan before connecting
#define WIFI_SCAN_NETWORKS 1 // Perform a network scan before connecting
#endif
// Optional hardcoded configuration (up to 2 networks)
#ifndef WIFI1_SSID
#define WIFI1_SSID ""
#define WIFI1_SSID ""
#endif
#ifndef WIFI1_PASS
#define WIFI1_PASS ""
#define WIFI1_PASS ""
#endif
#ifndef WIFI1_IP
#define WIFI1_IP ""
#define WIFI1_IP ""
#endif
#ifndef WIFI1_GW
#define WIFI1_GW ""
#define WIFI1_GW ""
#endif
#ifndef WIFI1_MASK
#define WIFI1_MASK ""
#define WIFI1_MASK ""
#endif
#ifndef WIFI1_DNS
#define WIFI1_DNS ""
#define WIFI1_DNS ""
#endif
#ifndef WIFI2_SSID
#define WIFI2_SSID ""
#define WIFI2_SSID ""
#endif
#ifndef WIFI2_PASS
#define WIFI2_PASS ""
#define WIFI2_PASS ""
#endif
#ifndef WIFI2_IP
#define WIFI2_IP ""
#define WIFI2_IP ""
#endif
#ifndef WIFI2_GW
#define WIFI2_GW ""
#define WIFI2_GW ""
#endif
#ifndef WIFI2_MASK
#define WIFI2_MASK ""
#define WIFI2_MASK ""
#endif
#ifndef WIFI2_DNS
#define WIFI2_DNS ""
#define WIFI2_DNS ""
#endif
#ifndef WIFI_RSSI_1M
#define WIFI_RSSI_1M -30 // Calibrate it with your router reading the RSSI at 1m
#define WIFI_RSSI_1M -30 // Calibrate it with your router reading the RSSI at 1m
#endif
#ifndef WIFI_PROPAGATION_CONST
#define WIFI_PROPAGATION_CONST 4 // This is typically something between 2.7 to 4.3 (free space is 2)
#define WIFI_PROPAGATION_CONST 4 // This is typically something between 2.7 to 4.3 (free space is 2)
#endif
// -----------------------------------------------------------------------------
@ -457,32 +339,29 @@ PROGMEM const char* const custom_reset_string[] = {
// -----------------------------------------------------------------------------
#ifndef WEB_SUPPORT
#define WEB_SUPPORT 1 // Enable web support (http, api, 121.65Kb)
#define WEB_SUPPORT 1 // Enable web support (http, api, 121.65Kb)
#endif
#ifndef WEB_EMBEDDED
#define WEB_EMBEDDED 1 // Build the firmware with the web interface embedded in
#define WEB_EMBEDDED 1 // Build the firmware with the web interface embedded in
#endif
// This is not working at the moment!!
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0
#ifndef WEB_SSL_ENABLED
#define WEB_SSL_ENABLED 0 // Use HTTPS web interface
#define WEB_SSL_ENABLED 0 // Use HTTPS web interface
#endif
#define WEB_MODE_NORMAL 0
#define WEB_MODE_PASSWORD 1
#ifndef WEB_USERNAME
#define WEB_USERNAME "admin" // HTTP username
#define WEB_USERNAME "admin" // HTTP username
#endif
#ifndef WEB_FORCE_PASS_CHANGE
#define WEB_FORCE_PASS_CHANGE 1 // Force the user to change the password if default one
#define WEB_FORCE_PASS_CHANGE 1 // Force the user to change the password if default one
#endif
#ifndef WEB_PORT
#define WEB_PORT 80 // HTTP port
#define WEB_PORT 80 // HTTP port
#endif
// -----------------------------------------------------------------------------
@ -491,19 +370,19 @@ PROGMEM const char* const custom_reset_string[] = {
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#ifndef WS_AUTHENTICATION
#define WS_AUTHENTICATION 1 // WS authentication ON by default (see #507)
#define WS_AUTHENTICATION 1 // WS authentication ON by default (see #507)
#endif
#ifndef WS_BUFFER_SIZE
#define WS_BUFFER_SIZE 5 // Max number of secured websocket connections
#define WS_BUFFER_SIZE 5 // Max number of secured websocket connections
#endif
#ifndef WS_TIMEOUT
#define WS_TIMEOUT 1800000 // Timeout for secured websocket
#define WS_TIMEOUT 1800000 // Timeout for secured websocket
#endif
#ifndef WS_UPDATE_INTERVAL
#define WS_UPDATE_INTERVAL 30000 // Update clients every 30 seconds
#define WS_UPDATE_INTERVAL 30000 // Update clients every 30 seconds
#endif
// -----------------------------------------------------------------------------
@ -512,67 +391,55 @@ PROGMEM const char* const custom_reset_string[] = {
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#ifndef API_ENABLED
#define API_ENABLED 0 // Do not enable API by default
#define API_ENABLED 0 // Do not enable API by default
#endif
#ifndef API_BUFFER_SIZE
#define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses
#define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses
#endif
#ifndef API_REAL_TIME_VALUES
#define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time)
#define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time)
#endif
// -----------------------------------------------------------------------------
// UI
// -----------------------------------------------------------------------------
#define UI_TAG_INPUT 0
#define UI_TAG_CHECKBOX 1
#define UI_TAG_SELECT 2
// -----------------------------------------------------------------------------
// MDNS / LLMNR / NETBIOS / SSDP
// -----------------------------------------------------------------------------
#ifndef MDNS_SERVER_SUPPORT
#define MDNS_SERVER_SUPPORT 1 // Publish services using mDNS by default (1.48Kb)
#define MDNS_SERVER_SUPPORT 1 // Publish services using mDNS by default (1.48Kb)
#endif
#ifndef MDNS_CLIENT_SUPPORT
#define MDNS_CLIENT_SUPPORT 0 // Resolve mDNS names (3.44Kb)
#define MDNS_CLIENT_SUPPORT 0 // Resolve mDNS names (3.44Kb)
#endif
#ifndef LLMNR_SUPPORT
#define LLMNR_SUPPORT 0 // Publish device using LLMNR protocol by default (1.95Kb) - requires 2.4.0
#define LLMNR_SUPPORT 0 // Publish device using LLMNR protocol by default (1.95Kb) - requires 2.4.0
#endif
#ifndef NETBIOS_SUPPORT
#define NETBIOS_SUPPORT 0 // Publish device using NetBIOS protocol by default (1.26Kb) - requires 2.4.0
#define NETBIOS_SUPPORT 0 // Publish device using NetBIOS protocol by default (1.26Kb) - requires 2.4.0
#endif
#ifndef SSDP_SUPPORT
#define SSDP_SUPPORT 0 // Publish device using SSDP protocol by default (4.59Kb)
// Not compatible with ALEXA_SUPPORT at the moment
#define SSDP_SUPPORT 0 // Publish device using SSDP protocol by default (4.59Kb)
// Not compatible with ALEXA_SUPPORT at the moment
#endif
#ifndef SSDP_DEVICE_TYPE
#define SSDP_DEVICE_TYPE "upnp:rootdevice"
//#define SSDP_DEVICE_TYPE "urn:schemas-upnp-org:device:BinaryLight:1"
#define SSDP_DEVICE_TYPE "upnp:rootdevice"
//#define SSDP_DEVICE_TYPE "urn:schemas-upnp-org:device:BinaryLight:1"
#endif
#if WEB_SUPPORT == 0
#undef SSDP_SUPPORT
#define SSDP_SUPPORT 0 // SSDP support requires web support
#endif
// -----------------------------------------------------------------------------
// SPIFFS
// -----------------------------------------------------------------------------
#ifndef SPIFFS_SUPPORT
#define SPIFFS_SUPPORT 0 // Do not add support for SPIFFS by default
#define SPIFFS_SUPPORT 0 // Do not add support for SPIFFS by default
#endif
// -----------------------------------------------------------------------------
@ -580,29 +447,29 @@ PROGMEM const char* const custom_reset_string[] = {
// -----------------------------------------------------------------------------
#ifndef OTA_PORT
#define OTA_PORT 8266 // OTA port
#define OTA_PORT 8266 // OTA port
#endif
#define OTA_GITHUB_FP "D7:9F:07:61:10:B3:92:93:E3:49:AC:89:84:5B:03:80:C1:9E:2F:8B"
#define OTA_GITHUB_FP "D7:9F:07:61:10:B3:92:93:E3:49:AC:89:84:5B:03:80:C1:9E:2F:8B"
// -----------------------------------------------------------------------------
// NOFUSS
// -----------------------------------------------------------------------------
#ifndef NOFUSS_SUPPORT
#define NOFUSS_SUPPORT 0 // Do not enable support for NoFuss by default (12.65Kb)
#define NOFUSS_SUPPORT 0 // Do not enable support for NoFuss by default (12.65Kb)
#endif
#ifndef NOFUSS_ENABLED
#define NOFUSS_ENABLED 0 // Do not perform NoFUSS updates by default
#define NOFUSS_ENABLED 0 // Do not perform NoFUSS updates by default
#endif
#ifndef NOFUSS_SERVER
#define NOFUSS_SERVER "" // Default NoFuss Server
#define NOFUSS_SERVER "" // Default NoFuss Server
#endif
#ifndef NOFUSS_INTERVAL
#define NOFUSS_INTERVAL 3600000 // Check for updates every hour
#define NOFUSS_INTERVAL 3600000 // Check for updates every hour
#endif
// -----------------------------------------------------------------------------
@ -610,50 +477,42 @@ PROGMEM const char* const custom_reset_string[] = {
// -----------------------------------------------------------------------------
#ifndef UART_MQTT_SUPPORT
#define UART_MQTT_SUPPORT 0 // No support by default
#define UART_MQTT_SUPPORT 0 // No support by default
#endif
#ifndef UART_MQTT_USE_SOFT
#define UART_MQTT_USE_SOFT 0 // Use SoftwareSerial
#define UART_MQTT_USE_SOFT 0 // Use SoftwareSerial
#endif
#ifndef UART_MQTT_HW_PORT
#define UART_MQTT_HW_PORT Serial // Hardware serial port (if UART_MQTT_USE_SOFT == 0)
#define UART_MQTT_HW_PORT Serial // Hardware serial port (if UART_MQTT_USE_SOFT == 0)
#endif
#ifndef UART_MQTT_RX_PIN
#define UART_MQTT_RX_PIN 4 // RX PIN (if UART_MQTT_USE_SOFT == 1)
#define UART_MQTT_RX_PIN 4 // RX PIN (if UART_MQTT_USE_SOFT == 1)
#endif
#ifndef UART_MQTT_TX_PIN
#define UART_MQTT_TX_PIN 5 // TX PIN (if UART_MQTT_USE_SOFT == 1)
#define UART_MQTT_TX_PIN 5 // TX PIN (if UART_MQTT_USE_SOFT == 1)
#endif
#ifndef UART_MQTT_BAUDRATE
#define UART_MQTT_BAUDRATE 115200 // Serial speed
#define UART_MQTT_BAUDRATE 115200 // Serial speed
#endif
#define UART_MQTT_BUFFER_SIZE 100 // UART buffer size
#if UART_MQTT_SUPPORT
#define MQTT_SUPPORT 1
#undef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT 0
#undef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT 0
#endif
#define UART_MQTT_BUFFER_SIZE 100 // UART buffer size
// -----------------------------------------------------------------------------
// MQTT
// -----------------------------------------------------------------------------
#ifndef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // MQTT support (22.38Kb async, 12.48Kb sync)
#define MQTT_SUPPORT 1 // MQTT support (22.38Kb async, 12.48Kb sync)
#endif
#ifndef MQTT_USE_ASYNC
#define MQTT_USE_ASYNC 1 // Use AysncMQTTClient (1) or PubSubClient (0)
#define MQTT_USE_ASYNC 1 // Use AysncMQTTClient (1) or PubSubClient (0)
#endif
// MQTT OVER SSL
@ -763,78 +622,78 @@ PROGMEM const char* const custom_reset_string[] = {
#ifndef MQTT_ENQUEUE_IP
#define MQTT_ENQUEUE_IP 1
#endif
#ifndef MQTT_ENQUEUE_MAC
#define MQTT_ENQUEUE_MAC 1
#endif
#ifndef MQTT_ENQUEUE_HOSTNAME
#define MQTT_ENQUEUE_HOSTNAME 1
#endif
#ifndef MQTT_ENQUEUE_DATETIME
#define MQTT_ENQUEUE_DATETIME 1
#endif
#ifndef MQTT_ENQUEUE_MESSAGE_ID
#define MQTT_ENQUEUE_MESSAGE_ID 1
#endif
// These particles will be concatenated to the MQTT_TOPIC base to form the actual topic
#define MQTT_TOPIC_JSON "data"
#define MQTT_TOPIC_ACTION "action"
#define MQTT_TOPIC_RELAY "relay"
#define MQTT_TOPIC_LED "led"
#define MQTT_TOPIC_BUTTON "button"
#define MQTT_TOPIC_IP "ip"
#define MQTT_TOPIC_VERSION "version"
#define MQTT_TOPIC_UPTIME "uptime"
#define MQTT_TOPIC_DATETIME "datetime"
#define MQTT_TOPIC_FREEHEAP "freeheap"
#define MQTT_TOPIC_VCC "vcc"
#define MQTT_TOPIC_STATUS "status"
#define MQTT_TOPIC_MAC "mac"
#define MQTT_TOPIC_RSSI "rssi"
#define MQTT_TOPIC_MESSAGE_ID "id"
#define MQTT_TOPIC_APP "app"
#define MQTT_TOPIC_INTERVAL "interval"
#define MQTT_TOPIC_HOSTNAME "host"
#define MQTT_TOPIC_TIME "time"
#define MQTT_TOPIC_RFOUT "rfout"
#define MQTT_TOPIC_RFIN "rfin"
#define MQTT_TOPIC_RFLEARN "rflearn"
#define MQTT_TOPIC_RFRAW "rfraw"
#define MQTT_TOPIC_UARTIN "uartin"
#define MQTT_TOPIC_UARTOUT "uartout"
#define MQTT_TOPIC_LOADAVG "loadavg"
#define MQTT_TOPIC_BOARD "board"
#define MQTT_TOPIC_JSON "data"
#define MQTT_TOPIC_ACTION "action"
#define MQTT_TOPIC_RELAY "relay"
#define MQTT_TOPIC_LED "led"
#define MQTT_TOPIC_BUTTON "button"
#define MQTT_TOPIC_IP "ip"
#define MQTT_TOPIC_VERSION "version"
#define MQTT_TOPIC_UPTIME "uptime"
#define MQTT_TOPIC_DATETIME "datetime"
#define MQTT_TOPIC_FREEHEAP "freeheap"
#define MQTT_TOPIC_VCC "vcc"
#define MQTT_TOPIC_STATUS "status"
#define MQTT_TOPIC_MAC "mac"
#define MQTT_TOPIC_RSSI "rssi"
#define MQTT_TOPIC_MESSAGE_ID "id"
#define MQTT_TOPIC_APP "app"
#define MQTT_TOPIC_INTERVAL "interval"
#define MQTT_TOPIC_HOSTNAME "host"
#define MQTT_TOPIC_TIME "time"
#define MQTT_TOPIC_RFOUT "rfout"
#define MQTT_TOPIC_RFIN "rfin"
#define MQTT_TOPIC_RFLEARN "rflearn"
#define MQTT_TOPIC_RFRAW "rfraw"
#define MQTT_TOPIC_UARTIN "uartin"
#define MQTT_TOPIC_UARTOUT "uartout"
#define MQTT_TOPIC_LOADAVG "loadavg"
#define MQTT_TOPIC_BOARD "board"
// Light module
#define MQTT_TOPIC_CHANNEL "channel"
#define MQTT_TOPIC_COLOR_RGB "rgb"
#define MQTT_TOPIC_COLOR_HSV "hsv"
#define MQTT_TOPIC_ANIM_MODE "anim_mode"
#define MQTT_TOPIC_ANIM_SPEED "anim_speed"
#define MQTT_TOPIC_BRIGHTNESS "brightness"
#define MQTT_TOPIC_MIRED "mired"
#define MQTT_TOPIC_KELVIN "kelvin"
#define MQTT_TOPIC_CHANNEL "channel"
#define MQTT_TOPIC_COLOR_RGB "rgb"
#define MQTT_TOPIC_COLOR_HSV "hsv"
#define MQTT_TOPIC_ANIM_MODE "anim_mode"
#define MQTT_TOPIC_ANIM_SPEED "anim_speed"
#define MQTT_TOPIC_BRIGHTNESS "brightness"
#define MQTT_TOPIC_MIRED "mired"
#define MQTT_TOPIC_KELVIN "kelvin"
#define MQTT_STATUS_ONLINE "1" // Value for the device ON message
#define MQTT_STATUS_OFFLINE "0" // Value for the device OFF message (will)
#define MQTT_STATUS_ONLINE "1" // Value for the device ON message
#define MQTT_STATUS_OFFLINE "0" // Value for the device OFF message (will)
#define MQTT_ACTION_RESET "reboot" // RESET MQTT topic particle
#define MQTT_ACTION_RESET "reboot" // RESET MQTT topic particle
// Internal MQTT events (do not change)
#define MQTT_CONNECT_EVENT 0
#define MQTT_DISCONNECT_EVENT 1
#define MQTT_MESSAGE_EVENT 2
#define MQTT_MESSAGE_ID_SHIFT 1000 // Store MQTT message id into EEPROM every these many
#define MQTT_MESSAGE_ID_SHIFT 1000 // Store MQTT message id into EEPROM every these many
// Custom get and set postfixes
// Use something like "/status" or "/set", with leading slash
// Since 1.9.0 the default value is "" for getter and "/set" for setter
#ifndef MQTT_GETTER
#define MQTT_GETTER ""
#define MQTT_GETTER ""
#endif
#ifndef MQTT_SETTER
#define MQTT_SETTER "/set"
#define MQTT_SETTER "/set"
#endif
// -----------------------------------------------------------------------------
@ -859,11 +718,6 @@ PROGMEM const char* const custom_reset_string[] = {
// LIGHT
// -----------------------------------------------------------------------------
// Available light providers (do not change)
#define LIGHT_PROVIDER_NONE 0
#define LIGHT_PROVIDER_MY92XX 1 // works with MY9291 and MY9231
#define LIGHT_PROVIDER_DIMMER 2
// LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels.
// They have to be defined for each device in the hardware.h file.
// If 3 or more channels first 3 will be considered RGB.
@ -970,11 +824,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define DOMOTICZ_SUPPORT MQTT_SUPPORT // Build with domoticz (if MQTT) support (1.72Kb)
#endif
#if DOMOTICZ_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Domoticz enabled enable MQTT
#endif
#define DOMOTICZ_ENABLED 0 // Disable domoticz by default
#define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic
@ -987,11 +836,6 @@ PROGMEM const char* const custom_reset_string[] = {
#define HOMEASSISTANT_SUPPORT MQTT_SUPPORT // Build with home assistant support (if MQTT, 1.64Kb)
#endif
#if HOMEASSISTANT_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Home Assistant enabled enable MQTT
#endif
#define HOMEASSISTANT_ENABLED 0 // Integration not enabled by default
#define HOMEASSISTANT_PREFIX "homeassistant" // Default MQTT prefix
@ -1033,92 +877,88 @@ PROGMEM const char* const custom_reset_string[] = {
// -----------------------------------------------------------------------------
#ifndef THINGSPEAK_SUPPORT
#define THINGSPEAK_SUPPORT 1 // Enable Thingspeak support by default (2.56Kb)
#define THINGSPEAK_SUPPORT 1 // Enable Thingspeak support by default (2.56Kb)
#endif
#define THINGSPEAK_ENABLED 0 // Thingspeak disabled by default
#define THINGSPEAK_APIKEY "" // Default API KEY
#ifndef THINGSPEAK_ENABLED
#define THINGSPEAK_ENABLED 0 // Thingspeak disabled by default
#endif
#define THINGSPEAK_USE_ASYNC 1 // Use AsyncClient instead of WiFiClientSecure
#ifndef THINGSPEAK_APIKEY
#define THINGSPEAK_APIKEY "" // Default API KEY
#endif
#define THINGSPEAK_USE_ASYNC 1 // Use AsyncClient instead of WiFiClientSecure
// THINGSPEAK OVER SSL
// Using THINGSPEAK over SSL works well but generates problems with the web interface,
// so you should compile it with WEB_SUPPORT to 0.
// When THINGSPEAK_USE_ASYNC is 1, requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
#define THINGSPEAK_USE_SSL 0 // Use secure connection
#define THINGSPEAK_FINGERPRINT "78 60 18 44 81 35 BF DF 77 84 D4 0A 22 0D 9B 4E 6C DC 57 2C"
#define THINGSPEAK_USE_SSL 0 // Use secure connection
#define THINGSPEAK_FINGERPRINT "78 60 18 44 81 35 BF DF 77 84 D4 0A 22 0D 9B 4E 6C DC 57 2C"
#define THINGSPEAK_HOST "api.thingspeak.com"
#define THINGSPEAK_HOST "api.thingspeak.com"
#if THINGSPEAK_USE_SSL
#define THINGSPEAK_PORT 443
#define THINGSPEAK_PORT 443
#else
#define THINGSPEAK_PORT 80
#define THINGSPEAK_PORT 80
#endif
#define THINGSPEAK_URL "/update"
#define THINGSPEAK_MIN_INTERVAL 15000 // Minimum interval between POSTs (in millis)
#ifndef ASYNC_TCP_SSL_ENABLED
#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC
#undef THINGSPEAK_SUPPORT // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED
#endif
#endif
#define THINGSPEAK_URL "/update"
#define THINGSPEAK_MIN_INTERVAL 15000 // Minimum interval between POSTs (in millis)
// -----------------------------------------------------------------------------
// SCHEDULER
// -----------------------------------------------------------------------------
#define SCHEDULER_TYPE_SWITCH 1
#define SCHEDULER_TYPE_DIM 2
#ifndef SCHEDULER_SUPPORT
#define SCHEDULER_SUPPORT 1 // Enable scheduler (1.77Kb)
#endif
#if SCHEDULER_SUPPORT
#undef NTP_SUPPORT
#define NTP_SUPPORT 1 // Scheduler needs NTP
#endif
#ifndef SCHEDULER_MAX_SCHEDULES
#define SCHEDULER_MAX_SCHEDULES 10 // Max schedules alowed
#endif
// -----------------------------------------------------------------------------
// NTP
// -----------------------------------------------------------------------------
#ifndef NTP_SUPPORT
#define NTP_SUPPORT 1 // Build with NTP support by default (6.78Kb)
#define NTP_SUPPORT 1 // Build with NTP support by default (6.78Kb)
#endif
#ifndef NTP_SERVER
#define NTP_SERVER "pool.ntp.org" // Default NTP server
#define NTP_SERVER "pool.ntp.org" // Default NTP server
#endif
#ifndef NTP_TIMEOUT
#define NTP_TIMEOUT 2000 // Set NTP request timeout to 2 seconds (issue #452)
#define NTP_TIMEOUT 1000 // Set NTP request timeout to 2 seconds (issue #452)
#endif
#ifndef NTP_TIME_OFFSET
#define NTP_TIME_OFFSET 60 // Default timezone offset (GMT+1)
#define NTP_TIME_OFFSET 60 // Default timezone offset (GMT+1)
#endif
#ifndef NTP_DAY_LIGHT
#define NTP_DAY_LIGHT true // Enable daylight time saving by default
#define NTP_DAY_LIGHT 1 // Enable daylight time saving by default
#endif
#ifndef NTP_SYNC_INTERVAL
#define NTP_SYNC_INTERVAL 60 // NTP initial check every minute
#define NTP_SYNC_INTERVAL 60 // NTP initial check every minute
#endif
#ifndef NTP_UPDATE_INTERVAL
#define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes
#define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes
#endif
#ifndef NTP_START_DELAY
#define NTP_START_DELAY 1000 // Delay NTP start 1 second
#define NTP_START_DELAY 1000 // Delay NTP start 1 second
#endif
#ifndef NTP_DST_REGION
#define NTP_DST_REGION 0 // 0 for Europe, 1 for USA (defined in NtpClientLib)
#define NTP_DST_REGION 0 // 0 for Europe, 1 for USA (defined in NtpClientLib)
#endif
// -----------------------------------------------------------------------------
@ -1127,13 +967,15 @@ PROGMEM const char* const custom_reset_string[] = {
// This setting defines whether Alexa support should be built into the firmware
#ifndef ALEXA_SUPPORT
#define ALEXA_SUPPORT 1 // Enable Alexa support by default (10.84Kb)
#define ALEXA_SUPPORT 1 // Enable Alexa support by default (10.84Kb)
#endif
// This is default value for the alexaEnabled setting that defines whether
// this device should be discoberable and respond to Alexa commands.
// Both ALEXA_SUPPORT and alexaEnabled should be 1 for Alexa support to work.
#define ALEXA_ENABLED 1
#ifndef ALEXA_ENABLED
#define ALEXA_ENABLED 1
#endif
// -----------------------------------------------------------------------------
// RFBRIDGE
@ -1141,20 +983,20 @@ PROGMEM const char* const custom_reset_string[] = {
// -----------------------------------------------------------------------------
#ifndef RF_SEND_TIMES
#define RF_SEND_TIMES 4 // How many times to send the message
#define RF_SEND_TIMES 4 // How many times to send the message
#endif
#ifndef RF_SEND_DELAY
#define RF_SEND_DELAY 500 // Interval between sendings in ms
#define RF_SEND_DELAY 500 // Interval between sendings in ms
#endif
#ifndef RF_RECEIVE_DELAY
#define RF_RECEIVE_DELAY 500 // Interval between recieving in ms (avoid debouncing)
#define RF_RECEIVE_DELAY 500 // Interval between recieving in ms (avoid debouncing)
#endif
#ifndef RF_RAW_SUPPORT
#define RF_RAW_SUPPORT 0 // RF raw codes require a specific firmware for the EFM8BB1
#define RF_RAW_SUPPORT 0 // RF raw codes require a specific firmware for the EFM8BB1
// https://github.com/rhx/RF-Bridge-EFM8BB1
#endif
@ -1164,32 +1006,18 @@ PROGMEM const char* const custom_reset_string[] = {
// -----------------------------------------------------------------------------
#ifndef IR_SUPPORT
#define IR_SUPPORT 0 // Do not build with IR support by default (10.25Kb)
#define IR_SUPPORT 0 // Do not build with IR support by default (10.25Kb)
#endif
#ifndef IR_PIN
#define IR_PIN 4 // IR LED
#define IR_PIN 4 // IR LED
#endif
// 24 Buttons Set of the IR Remote
#ifndef IR_BUTTON_SET
#define IR_BUTTON_SET 1 // IR button set to use (see below)
#define IR_BUTTON_SET 1 // IR button set to use (see below)
#endif
// IR Button modes
#define IR_BUTTON_MODE_NONE 0
#define IR_BUTTON_MODE_RGB 1
#define IR_BUTTON_MODE_HSV 2
#define IR_BUTTON_MODE_BRIGHTER 3
#define IR_BUTTON_MODE_STATE 4
#define IR_BUTTON_MODE_EFFECT 5
#define LIGHT_EFFECT_SOLID 0
#define LIGHT_EFFECT_FLASH 1
#define LIGHT_EFFECT_STROBE 2
#define LIGHT_EFFECT_FADE 3
#define LIGHT_EFFECT_SMOOTH 4
//Remote Buttons SET 1 (for the original Remote shipped with the controller)
#if IR_SUPPORT
#if IR_BUTTON_SET == 1
@ -1311,7 +1139,7 @@ PROGMEM const char* const custom_reset_string[] = {
// Custom RF module
// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/
// Enable support by passing RF_SUPPORT=1 build flag
// This module is not compatible with RFBRIDGE
// This module is not compatible with RFBRIDGE or SONOFF RF
//--------------------------------------------------------------------------------
#ifndef RF_SUPPORT


+ 104
- 0
code/espurna/config/progmem.h View File

@ -0,0 +1,104 @@
//--------------------------------------------------------------------------------
// PROGMEM definitions
//--------------------------------------------------------------------------------
//--------------------------------------------------------------------------------
// Reset reasons
//--------------------------------------------------------------------------------
PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reboot from web interface";
PROGMEM const char custom_reset_terminal[] = "Reboot from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reboot from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reboot from RPC";
PROGMEM const char custom_reset_ota[] = "Reboot after successful OTA update";
PROGMEM const char custom_reset_http[] = "Reboot from HTTP";
PROGMEM const char custom_reset_nofuss[] = "Reboot after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reboot after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
custom_reset_hardware, custom_reset_web, custom_reset_terminal,
custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
custom_reset_http, custom_reset_nofuss, custom_reset_upgrade,
custom_reset_factory
};
//--------------------------------------------------------------------------------
// Sensors
//--------------------------------------------------------------------------------
#if SENSOR_SUPPORT
PROGMEM const unsigned char magnitude_decimals[] = {
0,
1, 0, 2,
3, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0,
0, 0, 0,
0, 0, 3, 3
};
PROGMEM const char magnitude_unknown_topic[] = "unknown";
PROGMEM const char magnitude_temperature_topic[] = "temperature";
PROGMEM const char magnitude_humidity_topic[] = "humidity";
PROGMEM const char magnitude_pressure_topic[] = "pressure";
PROGMEM const char magnitude_current_topic[] = "current";
PROGMEM const char magnitude_voltage_topic[] = "voltage";
PROGMEM const char magnitude_active_power_topic[] = "power";
PROGMEM const char magnitude_apparent_power_topic[] = "apparent";
PROGMEM const char magnitude_reactive_power_topic[] = "reactive";
PROGMEM const char magnitude_power_factor_topic[] = "factor";
PROGMEM const char magnitude_energy_topic[] = "energy";
PROGMEM const char magnitude_energy_delta_topic[] = "energy_delta";
PROGMEM const char magnitude_analog_topic[] = "analog";
PROGMEM const char magnitude_digital_topic[] = "digital";
PROGMEM const char magnitude_events_topic[] = "events";
PROGMEM const char magnitude_pm1dot0_topic[] = "pm1dot0";
PROGMEM const char magnitude_pm2dot5_topic[] = "pm2dot5";
PROGMEM const char magnitude_pm10_topic[] = "pm10";
PROGMEM const char magnitude_co2_topic[] = "co2";
PROGMEM const char magnitude_lux_topic[] = "lux";
PROGMEM const char magnitude_uv_topic[] = "uv";
PROGMEM const char magnitude_distance_topic[] = "distance";
PROGMEM const char* const magnitude_topics[] = {
magnitude_unknown_topic, magnitude_temperature_topic, magnitude_humidity_topic,
magnitude_pressure_topic, magnitude_current_topic, magnitude_voltage_topic,
magnitude_active_power_topic, magnitude_apparent_power_topic, magnitude_reactive_power_topic,
magnitude_power_factor_topic, magnitude_energy_topic, magnitude_energy_delta_topic,
magnitude_analog_topic, magnitude_digital_topic, magnitude_events_topic,
magnitude_pm1dot0_topic, magnitude_pm2dot5_topic, magnitude_pm10_topic,
magnitude_co2_topic, magnitude_lux_topic, magnitude_uv_topic,
magnitude_distance_topic
};
PROGMEM const char magnitude_empty[] = "";
PROGMEM const char magnitude_celsius[] = "C";
PROGMEM const char magnitude_fahrenheit[] = "F";
PROGMEM const char magnitude_percentage[] = "%";
PROGMEM const char magnitude_hectopascals[] = "hPa";
PROGMEM const char magnitude_amperes[] = "A";
PROGMEM const char magnitude_volts[] = "V";
PROGMEM const char magnitude_watts[] = "W";
PROGMEM const char magnitude_kw[] = "kW";
PROGMEM const char magnitude_joules[] = "J";
PROGMEM const char magnitude_kwh[] = "kWh";
PROGMEM const char magnitude_ugm3[] = "µg/m3";
PROGMEM const char magnitude_ppm[] = "ppm";
PROGMEM const char magnitude_lux[] = "lux";
PROGMEM const char magnitude_uv[] = "uv";
PROGMEM const char magnitude_distance[] = "m";
PROGMEM const char* const magnitude_units[] = {
magnitude_empty, magnitude_celsius, magnitude_percentage,
magnitude_hectopascals, magnitude_amperes, magnitude_volts,
magnitude_watts, magnitude_watts, magnitude_watts,
magnitude_percentage, magnitude_joules, magnitude_joules,
magnitude_empty, magnitude_empty, magnitude_empty,
magnitude_ugm3, magnitude_ugm3, magnitude_ugm3,
magnitude_ppm, magnitude_lux, magnitude_uv,
magnitude_distance
};
#endif

+ 3
- 0
code/espurna/config/prototypes.h View File

@ -116,3 +116,6 @@ template<typename T> void domoticzSend(const char * key, T nvalue, const char *
// -----------------------------------------------------------------------------
char * ltrim(char * s);
void nice_delay(unsigned long ms);
#define ARRAYINIT(type, name, ...) \
type name[] = {__VA_ARGS__};

+ 10
- 226
code/espurna/config/sensors.h View File

@ -36,40 +36,9 @@
#define HUMIDITY_MIN_CHANGE 0 // Minimum humidity change to report
#endif
// American Society of Heating, Refrigerating and Air-Conditioning Engineers suggests a range of 45% - 55% humidity to manage health effects and illnesses.
// Comfortable: 30% - 60%
// Recommended: 45% - 55%
// High : 55% - 80%
#define HUMIDITY_NORMAL 0 // > %30
#define HUMIDITY_COMFORTABLE 1 // > %45
#define HUMIDITY_DRY 2 // < %30
#define HUMIDITY_WET 3 // > %70
// United States Environmental Protection Agency - UV Index Scale
// One UV Index unit is equivalent to 25 milliWatts per square meter.
#define UV_INDEX_LOW 0 // 0 to 2 means low danger from the sun's UV rays for the average person.
#define UV_INDEX_MODERATE 1 // 3 to 5 means moderate risk of harm from unprotected sun exposure.
#define UV_INDEX_HIGH 2 // 6 to 7 means high risk of harm from unprotected sun exposure. Protection against skin and eye damage is needed.
#define UV_INDEX_VERY_HIGH 3 // 8 to 10 means very high risk of harm from unprotected sun exposure.
// Take extra precautions because unprotected skin and eyes will be damaged and can burn quickly.
#define UV_INDEX_EXTREME 4 // 11 or more means extreme risk of harm from unprotected sun exposure.
// Take all precautions because unprotected skin and eyes can burn in minutes.
#define SENSOR_PUBLISH_ADDRESSES 0 // Publish sensor addresses
#define SENSOR_ADDRESS_TOPIC "address" // Topic to publish sensor addresses
//------------------------------------------------------------------------------
// UNITS
//------------------------------------------------------------------------------
#define POWER_WATTS 0
#define POWER_KILOWATTS 1
#define ENERGY_JOULES 0
#define ENERGY_KWH 1
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
#ifndef SENSOR_TEMPERATURE_UNITS
#define SENSOR_TEMPERATURE_UNITS TMP_CELSIUS // Temperature units (TMP_CELSIUS | TMP_FAHRENHEIT)
@ -83,63 +52,6 @@
#define SENSOR_POWER_UNITS POWER_WATTS // Power units (POWER_WATTS | POWER_KILOWATTS)
#endif
//--------------------------------------------------------------------------------
// Sensor ID
// These should remain over time, do not modify them, only add new ones at the end
//--------------------------------------------------------------------------------
#define SENSOR_DHTXX_ID 0x01
#define SENSOR_DALLAS_ID 0x02
#define SENSOR_EMON_ANALOG_ID 0x03
#define SENSOR_EMON_ADC121_ID 0x04
#define SENSOR_EMON_ADS1X15_ID 0x05
#define SENSOR_HLW8012_ID 0x06
#define SENSOR_V9261F_ID 0x07
#define SENSOR_ECH1560_ID 0x08
#define SENSOR_ANALOG_ID 0x09
#define SENSOR_DIGITAL_ID 0x10
#define SENSOR_EVENTS_ID 0x11
#define SENSOR_PMSX003_ID 0x12
#define SENSOR_BMX280_ID 0x13
#define SENSOR_MHZ19_ID 0x14
#define SENSOR_SI7021_ID 0x15
#define SENSOR_SHT3X_I2C_ID 0x16
#define SENSOR_BH1750_ID 0x17
#define SENSOR_PZEM004T_ID 0x18
#define SENSOR_AM2320_ID 0x19
#define SENSOR_GUVAS12SD_ID 0x20
#define SENSOR_CSE7766_ID 0x21
#define SENSOR_TMP3X_ID 0x22
#define SENSOR_HCSR04_ID 0x23
//--------------------------------------------------------------------------------
// Magnitudes
//--------------------------------------------------------------------------------
#define MAGNITUDE_NONE 0
#define MAGNITUDE_TEMPERATURE 1
#define MAGNITUDE_HUMIDITY 2
#define MAGNITUDE_PRESSURE 3
#define MAGNITUDE_CURRENT 4
#define MAGNITUDE_VOLTAGE 5
#define MAGNITUDE_POWER_ACTIVE 6
#define MAGNITUDE_POWER_APPARENT 7
#define MAGNITUDE_POWER_REACTIVE 8
#define MAGNITUDE_POWER_FACTOR 9
#define MAGNITUDE_ENERGY 10
#define MAGNITUDE_ENERGY_DELTA 11
#define MAGNITUDE_ANALOG 12
#define MAGNITUDE_DIGITAL 13
#define MAGNITUDE_EVENTS 14
#define MAGNITUDE_PM1dot0 15
#define MAGNITUDE_PM2dot5 16
#define MAGNITUDE_PM10 17
#define MAGNITUDE_CO2 18
#define MAGNITUDE_LUX 19
#define MAGNITUDE_UV 20
#define MAGNITUDE_DISTANCE 21
#define MAGNITUDE_MAX 22
// =============================================================================
// Specific data for each sensor
@ -154,11 +66,6 @@
#define ANALOG_SUPPORT 0
#endif
#if ANALOG_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
//------------------------------------------------------------------------------
// BH1750
// Enable support by passing BH1750_SUPPORT=1 build flag
@ -175,11 +82,6 @@
#define BH1750_MODE BH1750_CONTINUOUS_HIGH_RES_MODE
#if BH1750_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// BME280/BMP280
// Enable support by passing BMX280_SUPPORT=1 build flag
@ -202,11 +104,6 @@
#define BMX280_HUMIDITY 1 // Oversampling for humidity (set to 0 to disable magnitude, only for BME280)
#define BMX280_PRESSURE 1 // Oversampling for pressure (set to 0 to disable magnitude)
#if BMX280_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// Dallas OneWire temperature sensors
// Enable support by passing DALLAS_SUPPORT=1 build flag
@ -331,11 +228,6 @@
#define EMON_ADC121_I2C_ADDRESS 0x00 // 0x00 means auto
#if EMON_ADC121_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// Energy Monitor based on ADS1X15
// Enable support by passing EMON_ADS1X15_SUPPORT=1 build flag
@ -350,11 +242,6 @@
#define EMON_ADS1X15_GAIN ADS1X15_REG_CONFIG_PGA_4_096V
#define EMON_ADS1X15_MASK 0x0F // A0=1 A1=2 A2=4 A3=8
#if EMON_ADS1X15_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// Energy Monitor based on interval analog GPIO
// Enable support by passing EMON_ANALOG_SUPPORT=1 build flag
@ -364,11 +251,6 @@
#define EMON_ANALOG_SUPPORT 0 // Do not build support by default
#endif
#if EMON_ANALOG_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
//------------------------------------------------------------------------------
// Counter sensor
// Enable support by passing EVENTS_SUPPORT=1 build flag
@ -497,7 +379,6 @@
#define PZEM004T_HW_PORT Serial1 // Hardware serial port (if PZEM004T_USE_SOFT == 0)
#endif
//------------------------------------------------------------------------------
// SHT3X I2C (Wemos) temperature & humidity sensor
// Enable support by passing SHT3X_SUPPORT=1 build flag
@ -511,11 +392,6 @@
#define SHT3X_I2C_ADDRESS 0x00 // 0x00 means auto
#endif
#if SHT3X_I2C_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// SI7021 temperature & humidity sensor
// Enable support by passing SI7021_SUPPORT=1 build flag
@ -529,11 +405,6 @@
#define SI7021_ADDRESS 0x00 // 0x00 means auto
#endif
#if SI7021_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// TMP3X analog temperature sensor
// Enable support by passing TMP3X_SUPPORT=1 build flag
@ -547,11 +418,6 @@
#define TMP3X_TYPE TMP3X_TMP35
#endif
#if TMP3X_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
//------------------------------------------------------------------------------
// V9261F based power sensor
// Enable support by passing SI7021_SUPPORT=1 build flag
@ -591,11 +457,6 @@
#define AM2320_ADDRESS 0x00 // 0x00 means auto
#endif
#if AM2320_SUPPORT
#undef I2C_SUPPORT
#define I2C_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// GUVAS12SD UV Sensor (analog)
// Enable support by passing GUVAS12SD_SUPPORT=1 build flag
@ -610,7 +471,7 @@
#endif
// =============================================================================
// Sensor helpers configuration
// Sensor helpers configuration - can't move to dependencies.h
// =============================================================================
#ifndef SENSOR_SUPPORT
@ -628,6 +489,15 @@
#endif
#endif
// -----------------------------------------------------------------------------
// ADC
// -----------------------------------------------------------------------------
// Default ADC mode is to monitor internal power supply
#ifndef ADC_MODE_VALUE
#define ADC_MODE_VALUE ADC_VCC
#endif
// -----------------------------------------------------------------------------
// I2C
// -----------------------------------------------------------------------------
@ -651,98 +521,12 @@
#define I2C_CLEAR_BUS 0 // Clear I2C bus on boot
#define I2C_PERFORM_SCAN 1 // Perform a bus scan on boot
//--------------------------------------------------------------------------------
// Internal power monitor
// Enable support by passing ADC_VCC_ENABLED=1 build flag
// Do not enable this if using the analog GPIO for any other thing
//--------------------------------------------------------------------------------
#ifndef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 1
#endif
#if ADC_VCC_ENABLED
ADC_MODE(ADC_VCC);
#endif
//--------------------------------------------------------------------------------
// Class loading
//--------------------------------------------------------------------------------
#if SENSOR_SUPPORT
PROGMEM const unsigned char magnitude_decimals[] = {
0,
1, 0, 2,
3, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0,
0, 0, 0,
0, 0,
2, 3
};
PROGMEM const char magnitude_unknown_topic[] = "unknown";
PROGMEM const char magnitude_temperature_topic[] = "temperature";
PROGMEM const char magnitude_humidity_topic[] = "humidity";
PROGMEM const char magnitude_pressure_topic[] = "pressure";
PROGMEM const char magnitude_current_topic[] = "current";
PROGMEM const char magnitude_voltage_topic[] = "voltage";
PROGMEM const char magnitude_active_power_topic[] = "power";
PROGMEM const char magnitude_apparent_power_topic[] = "apparent";
PROGMEM const char magnitude_reactive_power_topic[] = "reactive";
PROGMEM const char magnitude_power_factor_topic[] = "factor";
PROGMEM const char magnitude_energy_topic[] = "energy";
PROGMEM const char magnitude_energy_delta_topic[] = "energy_delta";
PROGMEM const char magnitude_analog_topic[] = "analog";
PROGMEM const char magnitude_digital_topic[] = "digital";
PROGMEM const char magnitude_events_topic[] = "events";
PROGMEM const char magnitude_pm1dot0_topic[] = "pm1dot0";
PROGMEM const char magnitude_pm2dot5_topic[] = "pm2dot5";
PROGMEM const char magnitude_pm10_topic[] = "pm10";
PROGMEM const char magnitude_co2_topic[] = "co2";
PROGMEM const char magnitude_lux_topic[] = "lux";
PROGMEM const char magnitude_uv_topic[] = "uv";
PROGMEM const char magnitude_distance_topic[] = "distance";
PROGMEM const char* const magnitude_topics[] = {
magnitude_unknown_topic, magnitude_temperature_topic, magnitude_humidity_topic,
magnitude_pressure_topic, magnitude_current_topic, magnitude_voltage_topic,
magnitude_active_power_topic, magnitude_apparent_power_topic, magnitude_reactive_power_topic,
magnitude_power_factor_topic, magnitude_energy_topic, magnitude_energy_delta_topic,
magnitude_analog_topic, magnitude_digital_topic, magnitude_events_topic,
magnitude_pm1dot0_topic, magnitude_pm2dot5_topic, magnitude_pm10_topic,
magnitude_co2_topic, magnitude_lux_topic, magnitude_uv_topic,
magnitude_distance_topic
};
PROGMEM const char magnitude_empty[] = "";
PROGMEM const char magnitude_celsius[] = "C";
PROGMEM const char magnitude_fahrenheit[] = "F";
PROGMEM const char magnitude_percentage[] = "%";
PROGMEM const char magnitude_hectopascals[] = "hPa";
PROGMEM const char magnitude_amperes[] = "A";
PROGMEM const char magnitude_volts[] = "V";
PROGMEM const char magnitude_watts[] = "W";
PROGMEM const char magnitude_kw[] = "kW";
PROGMEM const char magnitude_joules[] = "J";
PROGMEM const char magnitude_kwh[] = "kWh";
PROGMEM const char magnitude_ugm3[] = "µg/m3";
PROGMEM const char magnitude_ppm[] = "ppm";
PROGMEM const char magnitude_lux[] = "lux";
PROGMEM const char magnitude_uv[] = "uv";
PROGMEM const char magnitude_distance[] = "m";
PROGMEM const char* const magnitude_units[] = {
magnitude_empty, magnitude_celsius, magnitude_percentage,
magnitude_hectopascals, magnitude_amperes, magnitude_volts,
magnitude_watts, magnitude_watts, magnitude_watts,
magnitude_percentage, magnitude_joules, magnitude_joules,
magnitude_empty, magnitude_empty, magnitude_empty,
magnitude_ugm3, magnitude_ugm3, magnitude_ugm3,
magnitude_ppm, magnitude_lux, magnitude_uv,
magnitude_distance
};
#include "../sensors/BaseSensor.h"
#if AM2320_SUPPORT


+ 244
- 0
code/espurna/config/types.h View File

@ -0,0 +1,244 @@
//------------------------------------------------------------------------------
// Type definitions
// Do not touch this definitions
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
// BUTTONS
//------------------------------------------------------------------------------
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
#define BUTTON_EVENT_RELEASED 2
#define BUTTON_EVENT_CLICK 2
#define BUTTON_EVENT_DBLCLICK 3
#define BUTTON_EVENT_LNGCLICK 4
#define BUTTON_EVENT_LNGLNGCLICK 5
#define BUTTON_MODE_NONE 0
#define BUTTON_MODE_TOGGLE 1
#define BUTTON_MODE_ON 2
#define BUTTON_MODE_OFF 3
#define BUTTON_MODE_AP 4
#define BUTTON_MODE_RESET 5
#define BUTTON_MODE_PULSE 6
#define BUTTON_MODE_FACTORY 7
// Needed for ESP8285 boards under Windows using PlatformIO (?)
#ifndef BUTTON_PUSHBUTTON
#define BUTTON_PUSHBUTTON 0
#define BUTTON_SWITCH 1
#define BUTTON_DEFAULT_HIGH 2
#define BUTTON_SET_PULLUP 4
#endif
//------------------------------------------------------------------------------
// RELAY
//------------------------------------------------------------------------------
#define RELAY_BOOT_OFF 0
#define RELAY_BOOT_ON 1
#define RELAY_BOOT_SAME 2
#define RELAY_BOOT_TOGGLE 3
#define RELAY_TYPE_NORMAL 0
#define RELAY_TYPE_INVERSE 1
#define RELAY_TYPE_LATCHED 2
#define RELAY_TYPE_LATCHED_INVERSE 3
#define RELAY_SYNC_ANY 0
#define RELAY_SYNC_NONE_OR_ONE 1
#define RELAY_SYNC_ONE 2
#define RELAY_SYNC_SAME 3
#define RELAY_PULSE_NONE 0
#define RELAY_PULSE_OFF 1
#define RELAY_PULSE_ON 2
#define RELAY_PROVIDER_RELAY 0
#define RELAY_PROVIDER_DUAL 1
#define RELAY_PROVIDER_LIGHT 2
#define RELAY_PROVIDER_RFBRIDGE 3
#define RELAY_PROVIDER_STM 4
//------------------------------------------------------------------------------
// MQTT
//------------------------------------------------------------------------------
// Internal MQTT events
#define MQTT_CONNECT_EVENT 0
#define MQTT_DISCONNECT_EVENT 1
#define MQTT_MESSAGE_EVENT 2
//------------------------------------------------------------------------------
// LED
//------------------------------------------------------------------------------
#define LED_MODE_MQTT 0 // LED will be managed from MQTT (OFF by default)
#define LED_MODE_WIFI 1 // LED will blink according to the WIFI status
#define LED_MODE_FOLLOW 2 // LED will follow state of linked relay (check RELAY#_LED)
#define LED_MODE_FOLLOW_INVERSE 3 // LED will follow the opposite state of linked relay (check RELAY#_LED)
#define LED_MODE_FINDME 4 // LED will be ON if all relays are OFF
#define LED_MODE_FINDME_WIFI 5 // A mixture between WIFI and FINDME
#define LED_MODE_ON 6 // LED always ON
#define LED_MODE_OFF 7 // LED always OFF
#define LED_MODE_RELAY 8 // If any relay is ON, LED will be ON, otherwise OFF
#define LED_MODE_RELAY_WIFI 9 // A mixture between WIFI and RELAY, the reverse of MIXED
// -----------------------------------------------------------------------------
// UI
// -----------------------------------------------------------------------------
#define UI_TAG_INPUT 0
#define UI_TAG_CHECKBOX 1
#define UI_TAG_SELECT 2
#define WEB_MODE_NORMAL 0
#define WEB_MODE_PASSWORD 1
// -----------------------------------------------------------------------------
// LIGHT
// -----------------------------------------------------------------------------
// Available light providers
#define LIGHT_PROVIDER_NONE 0
#define LIGHT_PROVIDER_MY92XX 1 // works with MY9291 and MY9231
#define LIGHT_PROVIDER_DIMMER 2
// -----------------------------------------------------------------------------
// SCHEDULER
// -----------------------------------------------------------------------------
#define SCHEDULER_TYPE_SWITCH 1
#define SCHEDULER_TYPE_DIM 2
// -----------------------------------------------------------------------------
// IR
// -----------------------------------------------------------------------------
// IR Button modes
#define IR_BUTTON_MODE_NONE 0
#define IR_BUTTON_MODE_RGB 1
#define IR_BUTTON_MODE_HSV 2
#define IR_BUTTON_MODE_BRIGHTER 3
#define IR_BUTTON_MODE_STATE 4
#define IR_BUTTON_MODE_EFFECT 5
#define LIGHT_EFFECT_SOLID 0
#define LIGHT_EFFECT_FLASH 1
#define LIGHT_EFFECT_STROBE 2
#define LIGHT_EFFECT_FADE 3
#define LIGHT_EFFECT_SMOOTH 4
//------------------------------------------------------------------------------
// RESET
//------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button
#define CUSTOM_RESET_WEB 2 // Reset from web interface
#define CUSTOM_RESET_TERMINAL 3 // Reset from terminal
#define CUSTOM_RESET_MQTT 4 // Reset via MQTT
#define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA 6 // Reset after successful OTA update
#define CUSTOM_RESET_HTTP 7 // Reset via HTTP GET
#define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface
#define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal
#define CUSTOM_RESET_MAX 10
//------------------------------------------------------------------------------
// ENVIRONMENTAL
//------------------------------------------------------------------------------
// American Society of Heating, Refrigerating and Air-Conditioning Engineers suggests a range of 45% - 55% humidity to manage health effects and illnesses.
// Comfortable: 30% - 60%
// Recommended: 45% - 55%
// High : 55% - 80%
#define HUMIDITY_NORMAL 0 // > %30
#define HUMIDITY_COMFORTABLE 1 // > %45
#define HUMIDITY_DRY 2 // < %30
#define HUMIDITY_WET 3 // > %70
// United States Environmental Protection Agency - UV Index Scale
// One UV Index unit is equivalent to 25 milliWatts per square meter.
#define UV_INDEX_LOW 0 // 0 to 2 means low danger from the sun's UV rays for the average person.
#define UV_INDEX_MODERATE 1 // 3 to 5 means moderate risk of harm from unprotected sun exposure.
#define UV_INDEX_HIGH 2 // 6 to 7 means high risk of harm from unprotected sun exposure. Protection against skin and eye damage is needed.
#define UV_INDEX_VERY_HIGH 3 // 8 to 10 means very high risk of harm from unprotected sun exposure.
// Take extra precautions because unprotected skin and eyes will be damaged and can burn quickly.
#define UV_INDEX_EXTREME 4 // 11 or more means extreme risk of harm from unprotected sun exposure.
// Take all precautions because unprotected skin and eyes can burn in minutes.
//------------------------------------------------------------------------------
// UNITS
//------------------------------------------------------------------------------
#define POWER_WATTS 0
#define POWER_KILOWATTS 1
#define ENERGY_JOULES 0
#define ENERGY_KWH 1
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
#define TMP_KELVIN 2
//--------------------------------------------------------------------------------
// Sensor ID
// These should remain over time, do not modify them, only add new ones at the end
//--------------------------------------------------------------------------------
#define SENSOR_DHTXX_ID 0x01
#define SENSOR_DALLAS_ID 0x02
#define SENSOR_EMON_ANALOG_ID 0x03
#define SENSOR_EMON_ADC121_ID 0x04
#define SENSOR_EMON_ADS1X15_ID 0x05
#define SENSOR_HLW8012_ID 0x06
#define SENSOR_V9261F_ID 0x07
#define SENSOR_ECH1560_ID 0x08
#define SENSOR_ANALOG_ID 0x09
#define SENSOR_DIGITAL_ID 0x10
#define SENSOR_EVENTS_ID 0x11
#define SENSOR_PMSX003_ID 0x12
#define SENSOR_BMX280_ID 0x13
#define SENSOR_MHZ19_ID 0x14
#define SENSOR_SI7021_ID 0x15
#define SENSOR_SHT3X_I2C_ID 0x16
#define SENSOR_BH1750_ID 0x17
#define SENSOR_PZEM004T_ID 0x18
#define SENSOR_AM2320_ID 0x19
#define SENSOR_GUVAS12SD_ID 0x20
#define SENSOR_CSE7766_ID 0x21
#define SENSOR_TMP3X_ID 0x22
#define SENSOR_HCSR04_ID 0x23
//--------------------------------------------------------------------------------
// Magnitudes
//--------------------------------------------------------------------------------
#define MAGNITUDE_NONE 0
#define MAGNITUDE_TEMPERATURE 1
#define MAGNITUDE_HUMIDITY 2
#define MAGNITUDE_PRESSURE 3
#define MAGNITUDE_CURRENT 4
#define MAGNITUDE_VOLTAGE 5
#define MAGNITUDE_POWER_ACTIVE 6
#define MAGNITUDE_POWER_APPARENT 7
#define MAGNITUDE_POWER_REACTIVE 8
#define MAGNITUDE_POWER_FACTOR 9
#define MAGNITUDE_ENERGY 10
#define MAGNITUDE_ENERGY_DELTA 11
#define MAGNITUDE_ANALOG 12
#define MAGNITUDE_DIGITAL 13
#define MAGNITUDE_EVENTS 14
#define MAGNITUDE_PM1dot0 15
#define MAGNITUDE_PM2dot5 16
#define MAGNITUDE_PM10 17
#define MAGNITUDE_CO2 18
#define MAGNITUDE_LUX 19
#define MAGNITUDE_UV 20
#define MAGNITUDE_DISTANCE 21
#define MAGNITUDE_MAX 22

+ 3
- 0
code/espurna/sensors/AM2320Sensor.h View File

@ -7,6 +7,9 @@
#pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h"
#include "I2CSensor.h"


+ 4
- 0
code/espurna/sensors/AnalogSensor.h View File

@ -7,6 +7,10 @@
#pragma once
// Set ADC to TOUT pin
#undef ADC_MODE_VALUE
#define ADC_MODE_VALUE ADC_TOUT
#include "Arduino.h"
#include "BaseSensor.h"


+ 3
- 0
code/espurna/sensors/BH1750Sensor.h View File

@ -7,6 +7,9 @@
#pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h"
#include "I2CSensor.h"


+ 3
- 0
code/espurna/sensors/BMX280Sensor.h View File

@ -7,6 +7,9 @@
#pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h"
#include "I2CSensor.h"


+ 4
- 0
code/espurna/sensors/EmonAnalogSensor.h View File

@ -7,6 +7,10 @@
#pragma once
// Set ADC to TOUT pin
#undef ADC_MODE_VALUE
#define ADC_MODE_VALUE ADC_TOUT
#include "Arduino.h"
#include "EmonSensor.h"


+ 4
- 0
code/espurna/sensors/EmonSensor.h View File

@ -7,6 +7,10 @@
#pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h"
#include "I2CSensor.h"


+ 4
- 0
code/espurna/sensors/GUVAS12SDSensor.h View File

@ -8,6 +8,10 @@
#pragma once
// Set ADC to TOUT pin
#undef ADC_MODE_VALUE
#define ADC_MODE_VALUE ADC_TOUT
#include "Arduino.h"
#include "BaseSensor.h"


+ 4
- 0
code/espurna/sensors/SHT3XI2CSensor.h View File

@ -7,6 +7,10 @@
#pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h"
#include "I2CSensor.h"


+ 5
- 0
code/espurna/sensors/SI7021Sensor.h View File

@ -7,6 +7,11 @@
#pragma once
#undef I2C_SUPPORT
#define I2C_SUPPORT 1 // Explicitly request I2C support.
#include "Arduino.h"
#include "I2CSensor.h"


+ 4
- 0
code/espurna/sensors/TMP3XSensor.h View File

@ -7,6 +7,10 @@
#pragma once
// Set ADC to TOUT pin
#undef ADC_MODE_VALUE
#define ADC_MODE_VALUE ADC_TOUT
#include "Arduino.h"
#include "BaseSensor.h"


+ 8
- 3
code/espurna/utils.ino View File

@ -123,7 +123,7 @@ void heartbeat() {
if (serial) {
DEBUG_MSG_P(PSTR("[MAIN] Uptime: %lu seconds\n"), uptime_seconds);
DEBUG_MSG_P(PSTR("[MAIN] Free heap: %lu bytes\n"), free_heap);
#if ADC_VCC_ENABLED
#if ADC_MODE_VALUE == ADC_VCC
DEBUG_MSG_P(PSTR("[MAIN] Power: %lu mV\n"), ESP.getVcc());
#endif
#if NTP_SUPPORT
@ -177,7 +177,7 @@ void heartbeat() {
lightMQTT();
#endif
#if (HEARTBEAT_REPORT_VCC)
#if ADC_VCC_ENABLED
#if ADC_MODE_VALUE == ADC_VCC
mqttSend(MQTT_TOPIC_VCC, String(ESP.getVcc()).c_str());
#endif
#endif
@ -422,7 +422,7 @@ void info() {
DEBUG_MSG_P(PSTR("[INIT] Settings size: %u bytes\n"), settingsSize());
DEBUG_MSG_P(PSTR("[INIT] Free heap: %u bytes\n"), getFreeHeap());
#if ADC_VCC_ENABLED
#if ADC_MODE_VALUE == ADC_VCC
DEBUG_MSG_P(PSTR("[INIT] Power: %u mV\n"), ESP.getVcc());
#endif
@ -525,3 +525,8 @@ void nice_delay(unsigned long ms) {
unsigned long start = millis();
while (millis() - start < ms) delay(1);
}
// This method is called by the SDK to know where to connect the ADC
int __get_adc_mode() {
return (int) (ADC_MODE_VALUE);
}

+ 3
- 1
code/espurna/ws.ino View File

@ -235,7 +235,9 @@ void _wsUpdate(JsonObject& root) {
root["uptime"] = getUptime();
root["rssi"] = WiFi.RSSI();
root["loadaverage"] = systemLoadAverage();
root["vcc"] = ESP.getVcc();
#if ADC_MODE_VALUE == ADC_VCC
root["vcc"] = ESP.getVcc();
#endif
#if NTP_SUPPORT
if (ntpSynced()) root["now"] = now();
#endif


Write Preview
Loading…
Cancel
Save