From b605cd43cd3389f7fa25e17de7f85e6fdf1a7a44 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Xose=20P=C3=A9rez?= <xose.perez@gmail.com>
Date: Fri, 19 Jan 2018 10:48:40 +0100
Subject: [PATCH] Move hardware code in main file to its own module

---
 code/espurna/debug.ino    |  1 +
 code/espurna/espurna.ino  | 41 ----------------------------------
 code/espurna/hardware.ino | 47 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 48 insertions(+), 41 deletions(-)
 create mode 100644 code/espurna/hardware.ino

diff --git a/code/espurna/debug.ino b/code/espurna/debug.ino
index dd3d0e72..5039d51a 100644
--- a/code/espurna/debug.ino
+++ b/code/espurna/debug.ino
@@ -10,6 +10,7 @@ Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
 
 #include <stdio.h>
 #include <stdarg.h>
+#include <EEPROM.h>
 
 extern "C" {
     #include "user_interface.h"
diff --git a/code/espurna/espurna.ino b/code/espurna/espurna.ino
index 21d167f8..a6d278a3 100644
--- a/code/espurna/espurna.ino
+++ b/code/espurna/espurna.ino
@@ -20,52 +20,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "config/all.h"
-#include <EEPROM.h>
 
-// -----------------------------------------------------------------------------
-// METHODS
 // -----------------------------------------------------------------------------
 
 unsigned long _loopDelay = 0;
 
-void hardwareSetup() {
-
-    EEPROM.begin(EEPROM_SIZE);
-
-    #if DEBUG_SERIAL_SUPPORT
-        DEBUG_PORT.begin(SERIAL_BAUDRATE);
-        #if DEBUG_ESP_WIFI
-            DEBUG_PORT.setDebugOutput(true);
-        #endif
-    #elif defined(SERIAL_BAUDRATE)
-        Serial.begin(SERIAL_BAUDRATE);
-    #endif
-
-    #if SPIFFS_SUPPORT
-        SPIFFS.begin();
-    #endif
-
-    #if defined(ESPLIVE)
-        //The ESPLive has an ADC MUX which needs to be configured.
-        pinMode(16, OUTPUT);
-        digitalWrite(16, HIGH); //Defualt CT input (pin B, solder jumper B)
-    #endif
-
-}
-
-void hardwareLoop() {
-
-    // Heartbeat
-    #if HEARTBEAT_ENABLED
-        static unsigned long last = 0;
-        if ((last == 0) || (millis() - last > HEARTBEAT_INTERVAL)) {
-            last = millis();
-            heartbeat();
-        }
-    #endif // HEARTBEAT_ENABLED
-
-}
-
 // -----------------------------------------------------------------------------
 // BOOTING
 // -----------------------------------------------------------------------------
diff --git a/code/espurna/hardware.ino b/code/espurna/hardware.ino
new file mode 100644
index 00000000..b5e534e7
--- /dev/null
+++ b/code/espurna/hardware.ino
@@ -0,0 +1,47 @@
+/*
+
+HARDWARE MODULE
+
+Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
+
+*/
+
+#include <EEPROM.h>
+
+void hardwareSetup() {
+
+    EEPROM.begin(EEPROM_SIZE);
+
+    #if DEBUG_SERIAL_SUPPORT
+        DEBUG_PORT.begin(SERIAL_BAUDRATE);
+        #if DEBUG_ESP_WIFI
+            DEBUG_PORT.setDebugOutput(true);
+        #endif
+    #elif defined(SERIAL_BAUDRATE)
+        Serial.begin(SERIAL_BAUDRATE);
+    #endif
+
+    #if SPIFFS_SUPPORT
+        SPIFFS.begin();
+    #endif
+
+    #if defined(ESPLIVE)
+        //The ESPLive has an ADC MUX which needs to be configured.
+        pinMode(16, OUTPUT);
+        digitalWrite(16, HIGH); //Defualt CT input (pin B, solder jumper B)
+    #endif
+
+}
+
+void hardwareLoop() {
+
+    // Heartbeat
+    #if HEARTBEAT_ENABLED
+        static unsigned long last = 0;
+        if ((last == 0) || (millis() - last > HEARTBEAT_INTERVAL)) {
+            last = millis();
+            heartbeat();
+        }
+    #endif // HEARTBEAT_ENABLED
+
+}